Re: [bpmn-user] Disable BPMN Validation

[Antoine Toulme <antoine@xxxxxxxxxxxxxxx>]

On Tue, Feb 17, 2009 at 5:44 PM, Andrea Zoppello <andrea.zoppello@xxxxxx> wrote:

Hi Antoine,

See comments below:

Antoine Toulme ha scritto:

On Tue, Feb 17, 2009 at 5:09 PM, Andrea Zoppello <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>> wrote:

   Hi,

   Sure here's the screenshot.

OK, you don't need the merging gateway if you don't merge a flow, so you should remove the second gateway.

You're right, i need to explicit the merge point because i need it to generate some deployable workflow artifacts, and even
if this is not a real case of "merge" i need to inform the workflow engine that the process execution is resumed to the main path of execution.
I'm using jbpm and in jbpm i need to resume the process execution with a xor join node.

If i don't put the element on the diagram i would not be able to generate code.

If you want to really be explicit, you can an empty end event to both the branches that stop there.

No it's not my use case, i've not make the end explicit because only one branches will really produce the
end of the process, the other branches means that there are some task to be exceuted in parallel but only one
of the three will continue the process execution.

I suppose you should merge the three flows at the end of the process then, after B1.

Regards the preferences sorry but maybe i miss something

   because i've not a Model Validation Preference Page. I'm using the
   bpmn editor for ganymede train.

Try typing Model Validation in the filter at the top. It's a top level preference node.

Regards the preference i'll confirm i miss something typing "Model Validation" show me  the attached
screenshot.

That's weird, you should make sure the EMF validation framework is installed.

   Andrea

   Antoine Toulme ha scritto:



       On Tue, Feb 17, 2009 at 4:17 PM, Andrea Zoppello
       <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>

       <mailto:andrea.zoppello@xxxxxx
       <mailto:andrea.zoppello@xxxxxx>>> wrote:

          Hi Antoine,

          You're right i'm tryng to model within a bpmn diagram a very
          strange use case.

          This is the case:

          I've a fork node ( modelled as an annotated parallel gateway in
          bpmn editor ), that spans three concurrent
          execution path, suppose only one ( a specific one ) of
       these path
          means the process must continue instead the other path means
          only that there are parallel activities to do but they don't
          contribute to the end of the process

          My first idea is to use another parallel gateway annotated
       with an
          Or Join annotation but this is not right, for that reason
       i've put
          a join ( annotated parallel gateway )  with only one
       sequence-flow
          incoming and only one sequence-flow outcoming.

          I need the join, to get the information that the process could
          continue.

          In that case, the bpmn editor mark the join node with an
       editor.

       I don't understand, can you attach a screenshot ?



          BTW where is the preference to disable constraint?? i've
       not found
          it on BPMN preference page.

       It's in the model validation page.



          I prefer the way of preference page, the other way you
       suggested
          is to uninstall the stp.bpmn.validation plugin ( right??)

       Sure, that works every time!




          Andrea

          Antoine Toulme ha scritto:

              Not sure why you'd want to do that... but hey, it's simple:
              close stp.bpmn.validation and no build occurs anymore.

              You can also deselect specific constraints in the
       preferences.

              Thanks,

              Antoine

              On Tue, Feb 17, 2009 at 3:47 PM, Andrea Zoppello
              <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>
       <mailto:andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>>
              <mailto:andrea.zoppello@xxxxxx
       <mailto:andrea.zoppello@xxxxxx>
              <mailto:andrea.zoppello@xxxxxx
       <mailto:andrea.zoppello@xxxxxx>>>> wrote:

                 Hi,

                 It's possible to disable validation when editing a bpmn
              diagram???

                 For example i want to be able to have a parallel gateway
              with only
                 one incoming sequence flow and
                 only one outcoming sequence flow.

                 Andrea
                 --
                 *Andrea Zoppello*
                 ___________________________________________
                 <www.spagoworld.org <http://www.spagoworld.org>
       <http://www.spagoworld.org>
              <http://www.spagoworld.org>>


                 Spagic Architect
                 ___________________________________________

                 Architect
                 Research & Innovation Division
                 *Engineering Ingegneria Informatica S.p.A.
                 *
                 Corso Stati Uniti, 23/C - 35127 Padova - Italy
                 Phone:  +39-049.8692511    Fax:+39-049.8692566

                 *www.eng.it <http://www.eng.it> <http://www.eng.it>
       <http://www.eng.it>                                     www.spagoworld.org <http://www.spagoworld.org>
       <http://www.spagoworld.org>

              <http://www.spagoworld.org>*
                     
                 _______________________________________________
                 bpmn-user mailing list
                 bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
       <mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>>
              <mailto:bpmn-user@xxxxxxxxxxx
       <mailto:bpmn-user@xxxxxxxxxxx> <mailto:bpmn-user@xxxxxxxxxxx
       <mailto:bpmn-user@xxxxxxxxxxx>>>


                 https://dev.eclipse.org/mailman/listinfo/bpmn-user


                    ------------------------------------------------------------------------



              _______________________________________________
              bpmn-user mailing list
              bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
       <mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>>
              https://dev.eclipse.org/mailman/listinfo/bpmn-user
             

          --
          *Andrea Zoppello*
          ___________________________________________
          <www.spagoworld.org <http://www.spagoworld.org>
       <http://www.spagoworld.org>>

          Spagic Architect
          ___________________________________________

          Architect
          Research & Innovation Division
          *Engineering Ingegneria Informatica S.p.A.
          *
          Corso Stati Uniti, 23/C - 35127 Padova - Italy
          Phone:  +39-049.8692511    Fax:+39-049.8692566

          *www.eng.it <http://www.eng.it> <http://www.eng.it>                              www.spagoworld.org <http://www.spagoworld.org>
       <http://www.spagoworld.org>*
               

          _______________________________________________
          bpmn-user mailing list
          bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
       <mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>>
          https://dev.eclipse.org/mailman/listinfo/bpmn-user


       ------------------------------------------------------------------------

       _______________________________________________
       bpmn-user mailing list
       bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
       https://dev.eclipse.org/mailman/listinfo/bpmn-user
       


   --
   *Andrea Zoppello*
   ___________________________________________
   <www.spagoworld.org <http://www.spagoworld.org>>

   Spagic Architect
   ___________________________________________

   Architect
   Research & Innovation Division
   *Engineering Ingegneria Informatica S.p.A.
   *
   Corso Stati Uniti, 23/C - 35127 Padova - Italy
   Phone:  +39-049.8692511    Fax:+39-049.8692566

   *www.eng.it <http://www.eng.it>                       www.spagoworld.org <http://www.spagoworld.org>*
         



   _______________________________________________
   bpmn-user mailing list
   bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
   https://dev.eclipse.org/mailman/listinfo/bpmn-user


------------------------------------------------------------------------

_______________________________________________
bpmn-user mailing list
bpmn-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/bpmn-user
 

--

*Andrea Zoppello*
___________________________________________
<www.spagoworld.org>

Spagic Architect
___________________________________________

Architect
Research & Innovation Division
*Engineering Ingegneria Informatica S.p.A.
*
Corso Stati Uniti, 23/C - 35127 Padova - Italy
Phone:  +39-049.8692511    Fax:+39-049.8692566

*www.eng.it                    www.spagoworld.org*
       

_______________________________________________
bpmn-user mailing list
bpmn-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/bpmn-user