[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [bpmn-user] Disable BPMN Validation

Hi Antoine,

See comments below:

Antoine Toulme ha scritto:


On Tue, Feb 17, 2009 at 5:09 PM, Andrea Zoppello <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>> wrote:

    Hi,

    Sure here's the screenshot.

OK, you don't need the merging gateway if you don't merge a flow, so you should remove the second gateway.


You're right, i need to explicit the merge point because i need it to generate some deployable workflow artifacts, and even
if this is not a real case of "merge" i need to inform the workflow engine that the process execution is resumed to the main path of execution.
I'm using jbpm and in jbpm i need to resume the process execution with a xor join node.


If i don't put the element on the diagram i would not be able to generate code.
If you want to really be explicit, you can an empty end event to both the branches that stop there.



No it's not my use case, i've not make the end explicit because only one branches will really produce the
end of the process, the other branches means that there are some task to be exceuted in parallel but only one
of the three will continue the process execution.


Regards the preferences sorry but maybe i miss something

because i've not a Model Validation Preference Page. I'm using the bpmn editor for ganymede train.

Try typing Model Validation in the filter at the top. It's a top level preference node.





Regards the preference i'll confirm i miss something typing "Model Validation" show me the attached
screenshot.





    Andrea

    Antoine Toulme ha scritto:



        On Tue, Feb 17, 2009 at 4:17 PM, Andrea Zoppello
        <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>
        <mailto:andrea.zoppello@xxxxxx
        <mailto:andrea.zoppello@xxxxxx>>> wrote:

           Hi Antoine,

           You're right i'm tryng to model within a bpmn diagram a very
           strange use case.

           This is the case:

           I've a fork node ( modelled as an annotated parallel gateway in
           bpmn editor ), that spans three concurrent
           execution path, suppose only one ( a specific one ) of
        these path
           means the process must continue instead the other path means
           only that there are parallel activities to do but they don't
           contribute to the end of the process

           My first idea is to use another parallel gateway annotated
        with an
           Or Join annotation but this is not right, for that reason
        i've put
           a join ( annotated parallel gateway )  with only one
        sequence-flow
           incoming and only one sequence-flow outcoming.

           I need the join, to get the information that the process could
           continue.

           In that case, the bpmn editor mark the join node with an
        editor.

        I don't understand, can you attach a screenshot ?



           BTW where is the preference to disable constraint?? i've
        not found
           it on BPMN preference page.

        It's in the model validation page.



           I prefer the way of preference page, the other way you
        suggested
           is to uninstall the stp.bpmn.validation plugin ( right??)

        Sure, that works every time!




Andrea

           Antoine Toulme ha scritto:

               Not sure why you'd want to do that... but hey, it's simple:
               close stp.bpmn.validation and no build occurs anymore.

               You can also deselect specific constraints in the
        preferences.

               Thanks,

               Antoine

               On Tue, Feb 17, 2009 at 3:47 PM, Andrea Zoppello
               <andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>
        <mailto:andrea.zoppello@xxxxxx <mailto:andrea.zoppello@xxxxxx>>
               <mailto:andrea.zoppello@xxxxxx
        <mailto:andrea.zoppello@xxxxxx>
               <mailto:andrea.zoppello@xxxxxx
        <mailto:andrea.zoppello@xxxxxx>>>> wrote:

                  Hi,

                  It's possible to disable validation when editing a bpmn
               diagram???

                  For example i want to be able to have a parallel gateway
               with only
                  one incoming sequence flow and
                  only one outcoming sequence flow.

                  Andrea
                  --
                  *Andrea Zoppello*
                  ___________________________________________
                  <www.spagoworld.org <http://www.spagoworld.org>
        <http://www.spagoworld.org>
               <http://www.spagoworld.org>>


Spagic Architect ___________________________________________

                  Architect
                  Research & Innovation Division
                  *Engineering Ingegneria Informatica S.p.A.
                  *
                  Corso Stati Uniti, 23/C - 35127 Padova - Italy
                  Phone:  +39-049.8692511    Fax:+39-049.8692566

*www.eng.it <http://www.eng.it> <http://www.eng.it>
<http://www.eng.it> www.spagoworld.org <http://www.spagoworld.org>
<http://www.spagoworld.org>


<http://www.spagoworld.org>*


                  _______________________________________________
                  bpmn-user mailing list
                  bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
        <mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>>
               <mailto:bpmn-user@xxxxxxxxxxx
        <mailto:bpmn-user@xxxxxxxxxxx> <mailto:bpmn-user@xxxxxxxxxxx
        <mailto:bpmn-user@xxxxxxxxxxx>>>


https://dev.eclipse.org/mailman/listinfo/bpmn-user


------------------------------------------------------------------------




_______________________________________________
bpmn-user mailing list
bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
<mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>>
https://dev.eclipse.org/mailman/listinfo/bpmn-user



-- *Andrea Zoppello* ___________________________________________ <www.spagoworld.org <http://www.spagoworld.org> <http://www.spagoworld.org>>

           Spagic Architect
           ___________________________________________

           Architect
           Research & Innovation Division
           *Engineering Ingegneria Informatica S.p.A.
           *
           Corso Stati Uniti, 23/C - 35127 Padova - Italy
           Phone:  +39-049.8692511    Fax:+39-049.8692566

*www.eng.it <http://www.eng.it> <http://www.eng.it> www.spagoworld.org <http://www.spagoworld.org>
<http://www.spagoworld.org>*



_______________________________________________ bpmn-user mailing list bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx> <mailto:bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>> https://dev.eclipse.org/mailman/listinfo/bpmn-user


------------------------------------------------------------------------

_______________________________________________
bpmn-user mailing list
bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx>
https://dev.eclipse.org/mailman/listinfo/bpmn-user




--

    *Andrea Zoppello*
    ___________________________________________
    <www.spagoworld.org <http://www.spagoworld.org>>

    Spagic Architect
    ___________________________________________

    Architect
    Research & Innovation Division
    *Engineering Ingegneria Informatica S.p.A.
    *
    Corso Stati Uniti, 23/C - 35127 Padova - Italy
    Phone:  +39-049.8692511    Fax:+39-049.8692566

*www.eng.it <http://www.eng.it> www.spagoworld.org <http://www.spagoworld.org>*





_______________________________________________ bpmn-user mailing list bpmn-user@xxxxxxxxxxx <mailto:bpmn-user@xxxxxxxxxxx> https://dev.eclipse.org/mailman/listinfo/bpmn-user


------------------------------------------------------------------------

_______________________________________________
bpmn-user mailing list
bpmn-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/bpmn-user


--

*Andrea Zoppello*
___________________________________________
<www.spagoworld.org>

Spagic Architect
___________________________________________

Architect
Research & Innovation Division
*Engineering Ingegneria Informatica S.p.A.
*
Corso Stati Uniti, 23/C - 35127 Padova - Italy
Phone:  +39-049.8692511    Fax:+39-049.8692566

*www.eng.it                    www.spagoworld.org*
	



PNG image