Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [ptp-user] Problems with sh BUILD

Yeah! 

Using the latest build 2.1.3 it works great! To summarize.. 

Problem: 
 - unable to debug parallel application, while running without 
   debugging worked

Symptoms:
 - eclipse threw exception "Unhandled event loop exception" when 
   tried to start debugging
 - config.log listed some errors from building the debugger sdm
   (posted at the end of this mail)

Solution that worked for me:

 - followed workflow on:
     wiki.eclipse.org/PTP/release_notes/2.1

 - before testing (step 5) installed build from: 
     wiki.eclipse.org/PTP/builds/2.1.3

Thanks to Greg!

Regards,
Stefan


Am Samstag, den 20.06.2009, 09:33 -0400 schrieb Greg Watson:
> HI Stefan,
> 
> Sorry for the delay. It looks like this was actually a bug in the  
> debugger. Can you try installing the latest 2.1.3 build to see if it  
> fixes the problem? The build is available here: http://wiki.eclipse.org/PTP/builds/2.1.3
> 
> Don't worry about the fact there is no ptp_ibmpe_proxy. This will only  
> be available if you're building on a machine with IBM's PE installed  
> (hence the 'or'.)
> 
> Regards,
> Greg
> 
> On Jun 18, 2009, at 12:43 PM, Stefan Gr wrote:
> 
> > Hello,
> >
> > sorry for being late, but there was no time to response within the  
> > last
> > week.
> >
> >> Which version of Open MPI are you using (ompi_info)?
> > OpenMPI 1.2.5 (rev. 16989)
> >
> >> Are you able to run the MPI program from the command line using
> > mpirun?
> >> Are you able to run the MPI program using a Parallel Application
> >> launch configuration in Eclipse (not debug)?
> >
> > Yes and yes. No problem. However, this warning is printed for each
> > process, when MPI initializes:
> >
> > libibverbs: Fatal: couldn't read uverbs ABI version.
> > --------------------------------------------------------------------------
> > [0,1,X]: OpenIB on host 127.0.0.1 was unable to find any HCAs.
> > Another transport will be used instead, although this may result in
> > lower performance.
> > --------------------------------------------------------------------------
> >
> > The same with mpiexec and running my project in Eclipse without
> > debugging.
> >
> > The Wiki on wiki.eclipse.org/PTP/release_notes/2.1 says:
> >
> > "This should build and install the executables. Check the bin  
> > directory
> > to see if there are executables in it (e.g. ptp_ibmpe_proxy or sdm).  
> > If
> > you see any errors here, please refer to the Trouble Shooting section
> > below."
> >
> > But for me there is just the sdm executable. No ptp_ibmpe_proxy.
> > Unfortunately the trouble-shooting doesn't mention this. But could  
> > be a
> > hint?
> >
> > Regards,
> > Stefan
> >
> >
> > Am Mittwoch, den 10.06.2009, 11:00 -0400 schrieb Greg Watson:
> >> Stefan,
> >>
> >> Looking at your original email again, it seems like configure is
> >> actually working correctly. If you have an sdm executable, then it
> >> must have worked.
> >>
> >> Which version of Open MPI are you using (ompi_info)?
> >>
> >> Are you able to run the MPI program from the command line using  
> >> mpirun?
> >>
> >> Are you able to run the MPI program using a Parallel Application
> >> launch configuration in Eclipse (not debug)?
> >>
> >> Regards,
> >>
> >> Greg
> >>
> >>
> >> On Jun 10, 2009, at 12:36 PM, Stefan Gr wrote:
> >>
> >>> Hi,
> >>>
> >>> uname works and returns "Linux" when used without parameters. But
> >>> uname -p returns "unknown"
> >>>
> >>> Stefan
> >>>
> >>>
> >>> Am Mittwoch, den 10.06.2009, 10:30 -0400 schrieb Greg Watson:
> >>>> Stefan,
> >>>>
> >>>> These programs are available on different operating systems, so the
> >>>> fact that you don't have them shouldn't be a problem. As long as  
> >>>> you
> >>>> have uname, configure should work. Does 'uname -p' work for you?
> >>>>
> >>>> Greg
> >>>>
> >>>> On Jun 2, 2009, at 8:06 PM, Stefan Gr wrote:
> >>>>
> >>>>> Hello Greg and the other users,
> >>>>>
> >>>>> out of those 9 apps just one actually exists. it is "/bin/
> >>>>> uname", but
> >>>>> when I execute it from the terminal with parameter -x it answers:
> >>>>>
> >>>>> 	./bin/uname: invalid option -- x
> >>>>>
> >>>>> without the option it returns "Linux". also I found no equivalents
> >>>>> for
> >>>>> the others elsewhere in the filesystem. I have no idea why this is
> >>>>> the
> >>>>> case.
> >>>>> what are these applications good for and what could be reasons for
> >>>>> my
> >>>>> system not to have them?
> >>>>>
> >>>>> nevertheless the script may know that it is running in linux,
> >>>>> because
> >>>>> the commands above worked:
> >>>>> 
> >>>>> 	hostname = pc
> >>>>> 	uname -m = i686
> >>>>> 	uname -r = 2.6.24-16-generic
> >>>>> 	uname -s = Linux
> >>>>> 	uname -v = #1 SMP Thu Apr 10 13:23:42 UTC 2008
> >>>>>
> >>>>> I am running Ubuntu, installed MPI and OpenMP via the Synaptic
> >>>>> PackageManager and Eclipse the way the tutorial describes it.
> >>>>> furthermore gdb is installed in version 6.8 and gcc in version  
> >>>>> 4.2.3
> >>>>> (although I do not think this has something to do with my debugger
> >>>>> problem)
> >>>>>
> >>>>> I'm grateful for every hint you can give me.
> >>>>> Stefan
> >>>>>
> >>>>>
> >>>>> Am Montag, den 01.06.2009, 19:54 -0400 schrieb Greg Watson:
> >>>>>> Stefan,
> >>>>>>
> >>>>>> I wonder if the fact that uname is returning "unknown" might have
> >>>>>> something to do with it:
> >>>>>>
> >>>>>> /usr/bin/uname -p = unknown
> >>>>>> /bin/uname -X     = unknown
> >>>>>>
> >>>>>> /bin/arch              = unknown
> >>>>>> /usr/bin/arch -k       = unknown
> >>>>>> /usr/convex/getsysinfo = unknown
> >>>>>> /usr/bin/hostinfo      = unknown
> >>>>>> /bin/machine           = unknown
> >>>>>> /usr/bin/oslevel       = unknown
> >>>>>> /bin/universe          = unknown
> >>>>>>
> >>>>>> I would think that this might be confusing the configure script  
> >>>>>> so
> >>>>>> that it doesn't think you're on a linux system. Any idea why this
> >>>>>> might be happening on your system?
> >>>>>>
> >>>>>> Greg
> >>>>>>
> >>>>>> On Jun 1, 2009, at 1:50 PM, Stefan Gr wrote:
> >>>>>>
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> I'm new at Eclipse (..and Linux at all) and have some trouble  
> >>>>>>> with
> >>>>>>> setting up PTP. In detail the "sh BUILD" step of :
> >>>>>>>
> >>>>>>> wiki.eclipse.org/PTP/release_notes/2.1
> >>>>>>>
> >>>>>>> reports errors I cannot fix. As a result the debugger bails  
> >>>>>>> out on
> >>>>>>> the
> >>>>>>> MPI hello world C template and reports the following:
> >>>>>>>
> >>>>>>>
> >>>>>>> ---< Eclipse: Unhandled event loop exception
> >>>>>>>> --------------------------
> >>>>>>>
> >>>>>>> eclipse.buildId=M20090211-1700
> >>>>>>> java.version=1.6.0_06
> >>>>>>> java.vendor=Sun Microsystems Inc.
> >>>>>>> BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=de_DE
> >>>>>>> Command-line arguments:  -os linux -ws gtk -arch x86
> >>>>>>>
> >>>>>>> Error
> >>>>>>> Mon Jun 01 17:40:09 CEST 2009
> >>>>>>> Unhandled event loop exception
> >>>>>>>
> >>>>>>> org.eclipse.swt.SWTException: Failed to execute runnable
> >>>>>>> (java.lang.NullPointerException)
> >>>>>>> 	at org.eclipse.swt.SWT.error(SWT.java:3777)
> >>>>>>> 	at ...
> >>>>>>> 	at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
> >>>>>>> Caused by: java.lang.NullPointerException
> >>>>>>> 	at
> >>>>>>> org
> >>>>>>> .eclipse
> >>>>>>> .ptp.ui.model.ElementHandler.addToRegister(ElementHandler.java: 
> >>>>>>> 54)
> >>>>>>> 	at
> >>>>>>> org
> >>>>>>> .eclipse
> >>>>>>> .ptp
> >>>>>>> .debug
> >>>>>>> .ui
> >>>>>>> .views
> >>>>>>> .ParallelDebugViewEventHandler
> >>>>>>> .doHandleDebugEvent(ParallelDebugViewEventHandler.java:78)
> >>>>>>> 	at
> >>>>>>> org
> >>>>>>> .eclipse
> >>>>>>> .ptp.debug.internal.ui.views.AbstractPDebugViewEventHandler
> >>>>>>> $
> >>>>>>> PDebugEventWorkbenchJob
> >>>>>>> .runInUIThread(AbstractPDebugViewEventHandler.java:134)
> >>>>>>> 	at org.eclipse.ui.progress.UIJob$1.run(UIJob.java:94)
> >>>>>>> 	at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java: 
> >>>>>>> 35)
> >>>>>>> 	at
> >>>>>>> org
> >>>>>>> .eclipse
> >>>>>>> .swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:
> >>>>>>> 133)
> >>>>>>> 	... 22 more
> >>>>>>>
> >>>>>>> ---</ Eclipse: Unhandled event loop exception
> >>>>>>>> -------------------------
> >>>>>>>
> >>>>>>>
> >>>>>>> Compiling and running the example works. So I guess this is  
> >>>>>>> caused
> >>>>>>> by
> >>>>>>> errors while building debugger and/or proxy. What follows are
> >>>>>>> parts of
> >>>>>>> the config.log where (I think) something didn't work:
> >>>>>>>
> >>>>>>> ...
> >>>>>>> /usr/bin/ld: cannot find -lsocket
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> ...
> >>>>>>> undefined reference to `openpty'
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> ...
> >>>>>>> /usr/bin/ld: cannot find -lposix4
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> ...
> >>>>>>> conftest.c:59:17: error: jni.h: No such file or directory
> >>>>>>> ...
> >>>>>>> conftest.c:13:28: error: ac_nonexistent.h: No such file or
> >>>>>>> directory
> >>>>>>> ...
> >>>>>>> configure:5412: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> conftest.c: In function 'main':
> >>>>>>> conftest.c:33: error: void value not ignored as it ought to be
> >>>>>>> ...
> >>>>>>> configure:5588: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> /tmp/ccc9lhXE.o: In function `main':
> >>>>>>> /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/conftest.c:63:
> >>>>>>> undefined reference to `_doprnt'
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> ...
> >>>>>>>
> >>>>>>> The full config.log can be found the end of the mail. After
> >>>>>>> executing
> >>>>>>> BUILD the "bin"-directory just contains the sdm-executable..?!
> >>>>>>>
> >>>>>>> So is possibly someone out there, who knows how to fix these
> >>>>>>> problems
> >>>>>>> or how to work around it, to get the debugger working???
> >>>>>>>
> >>>>>>> Regards
> >>>>>>> Stefan
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> ---< sh BUILD: config.log
> >>>>>>>> ---------------------------------------------
> >>>>>>>
> >>>>>>> This file contains any messages produced by compilers while
> >>>>>>> running configure, to aid debugging if configure makes a  
> >>>>>>> mistake.
> >>>>>>>
> >>>>>>> It was created by org.eclipse.ptp.debug.sdm configure 2.1.2,  
> >>>>>>> which
> >>>>>>> was
> >>>>>>> generated by GNU Autoconf 2.61.  Invocation command line was
> >>>>>>>
> >>>>>>> $ configure
> >>>>>>> --prefix=/home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.linux.x86_2.1.2.200905110828
> >>>>>>>
> >>>>>>> ## --------- ##
> >>>>>>> ## Platform. ##
> >>>>>>> ## --------- ##
> >>>>>>>
> >>>>>>> hostname = pc
> >>>>>>> uname -m = i686
> >>>>>>> uname -r = 2.6.24-16-generic
> >>>>>>> uname -s = Linux
> >>>>>>> uname -v = #1 SMP Thu Apr 10 13:23:42 UTC 2008
> >>>>>>>
> >>>>>>> /usr/bin/uname -p = unknown
> >>>>>>> /bin/uname -X     = unknown
> >>>>>>>
> >>>>>>> /bin/arch              = unknown
> >>>>>>> /usr/bin/arch -k       = unknown
> >>>>>>> /usr/convex/getsysinfo = unknown
> >>>>>>> /usr/bin/hostinfo      = unknown
> >>>>>>> /bin/machine           = unknown
> >>>>>>> /usr/bin/oslevel       = unknown
> >>>>>>> /bin/universe          = unknown
> >>>>>>>
> >>>>>>> PATH: /usr/local/sbin
> >>>>>>> PATH: /usr/local/bin
> >>>>>>> PATH: /usr/sbin
> >>>>>>> PATH: /usr/bin
> >>>>>>> PATH: /sbin
> >>>>>>> PATH: /bin
> >>>>>>> PATH: /usr/games
> >>>>>>>
> >>>>>>>
> >>>>>>> ## ----------- ##
> >>>>>>> ## Core tests. ##
> >>>>>>> ## ----------- ##
> >>>>>>>
> >>>>>>> configure:1785: checking for a BSD-compatible install
> >>>>>>> configure:1841: result: /usr/bin/install -c
> >>>>>>> configure:1852: checking whether build environment is sane
> >>>>>>> configure:1895: result: yes
> >>>>>>> configure:1923: checking for a thread-safe mkdir -p
> >>>>>>> configure:1962: result: /bin/mkdir -p
> >>>>>>> configure:1975: checking for gawk
> >>>>>>> configure:2005: result: no
> >>>>>>> configure:1975: checking for mawk
> >>>>>>> configure:1991: found /usr/bin/mawk
> >>>>>>> configure:2002: result: mawk
> >>>>>>> configure:2013: checking whether make sets $(MAKE)
> >>>>>>> configure:2034: result: yes
> >>>>>>> configure:2231: checking build system type
> >>>>>>> configure:2249: result: i686-pc-linux-gnu
> >>>>>>> configure:2342: checking for gcc
> >>>>>>> configure:2358: found /usr/bin/gcc
> >>>>>>> configure:2369: result: gcc
> >>>>>>> configure:2607: checking for C compiler version
> >>>>>>> configure:2614: gcc --version >&5
> >>>>>>> gcc (GCC) 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
> >>>>>>> Copyright (C) 2007 Free Software Foundation, Inc.
> >>>>>>> This is free software; see the source for copying conditions.
> >>>>>>> There
> >>>>>>> is
> >>>>>>> NO
> >>>>>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A  
> >>>>>>> PARTICULAR
> >>>>>>> PURPOSE.
> >>>>>>>
> >>>>>>> configure:2617: $? = 0
> >>>>>>> configure:2624: gcc -v >&5
> >>>>>>> Using built-in specs.
> >>>>>>> Target: i486-linux-gnu
> >>>>>>> Configured with: ../src/configure -v --enable-languages=c,c
> >>>>>>> ++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared
> >>>>>>> --with-system-zlib --libexecdir=/usr/lib --without-included-
> >>>>>>> gettext
> >>>>>>> --enable-threads=posix --enable-nls
> >>>>>>> --with-gxx-include-dir=/usr/include/c++/4.2 --program- 
> >>>>>>> suffix=-4.2
> >>>>>>> --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc
> >>>>>>> --enable-mpfr --enable-targets=all --enable-checking=release
> >>>>>>> --build=i486-linux-gnu --host=i486-linux-gnu --target=i486- 
> >>>>>>> linux-
> >>>>>>> gnu
> >>>>>>> Thread model: posix
> >>>>>>> gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
> >>>>>>> configure:2627: $? = 0
> >>>>>>> configure:2634: gcc -V >&5
> >>>>>>> gcc: '-V' option must have argument
> >>>>>>> configure:2637: $? = 1
> >>>>>>> configure:2660: checking for C compiler default output file name
> >>>>>>> configure:2687: gcc    conftest.c  >&5
> >>>>>>> configure:2690: $? = 0
> >>>>>>> configure:2728: result: a.out
> >>>>>>> configure:2745: checking whether the C compiler works
> >>>>>>> configure:2755: ./a.out
> >>>>>>> configure:2758: $? = 0
> >>>>>>> configure:2775: result: yes
> >>>>>>> configure:2782: checking whether we are cross compiling
> >>>>>>> configure:2784: result: no
> >>>>>>> configure:2787: checking for suffix of executables
> >>>>>>> configure:2794: gcc -o conftest    conftest.c  >&5
> >>>>>>> configure:2797: $? = 0
> >>>>>>> configure:2821: result:
> >>>>>>> configure:2827: checking for suffix of object files
> >>>>>>> configure:2853: gcc -c   conftest.c >&5
> >>>>>>> configure:2856: $? = 0
> >>>>>>> configure:2879: result: o
> >>>>>>> configure:2883: checking whether we are using the GNU C compiler
> >>>>>>> configure:2912: gcc -c   conftest.c >&5
> >>>>>>> configure:2918: $? = 0
> >>>>>>> configure:2935: result: yes
> >>>>>>> configure:2940: checking whether gcc accepts -g
> >>>>>>> configure:2970: gcc -c -g  conftest.c >&5
> >>>>>>> configure:2976: $? = 0
> >>>>>>> configure:3075: result: yes
> >>>>>>> configure:3092: checking for gcc option to accept ISO C89
> >>>>>>> configure:3166: gcc  -c -g -O2  conftest.c >&5
> >>>>>>> configure:3172: $? = 0
> >>>>>>> configure:3195: result: none needed
> >>>>>>> configure:3224: checking for style of include used by make
> >>>>>>> configure:3252: result: GNU
> >>>>>>> configure:3277: checking dependency style of gcc
> >>>>>>> configure:3368: result: gcc3
> >>>>>>> configure:3384: checking whether gcc and cc understand -c and -o
> >>>>>>> together
> >>>>>>> configure:3419: gcc -c conftest.c -o conftest2.o >&5
> >>>>>>> configure:3422: $? = 0
> >>>>>>> configure:3428: gcc -c conftest.c -o conftest2.o >&5
> >>>>>>> configure:3431: $? = 0
> >>>>>>> configure:3442: cc -c conftest.c >&5
> >>>>>>> configure:3445: $? = 0
> >>>>>>> configure:3453: cc -c conftest.c -o conftest2.o >&5
> >>>>>>> configure:3456: $? = 0
> >>>>>>> configure:3462: cc -c conftest.c -o conftest2.o >&5
> >>>>>>> configure:3465: $? = 0
> >>>>>>> configure:3483: result: yes
> >>>>>>> configure:3522: checking for a BSD-compatible install
> >>>>>>> configure:3578: result: /usr/bin/install -c
> >>>>>>> configure:3589: checking whether make sets $(MAKE)
> >>>>>>> configure:3610: result: yes
> >>>>>>> configure:3662: checking for ranlib
> >>>>>>> configure:3678: found /usr/bin/ranlib
> >>>>>>> configure:3689: result: ranlib
> >>>>>>> configure:3729: checking for gethostbyname in -lnsl
> >>>>>>> configure:3764: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include
> >>>>>>> conftest.c -
> >>>>>>> lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:3770: $? = 0
> >>>>>>> configure:3788: result: yes
> >>>>>>> configure:3800: checking for socket in -lsocket
> >>>>>>> configure:3835: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lsocket  -lnsl  -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> /usr/bin/ld: cannot find -lsocket
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> configure:3841: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> |
> >>>>>>> | /* Override any GCC internal prototype to avoid an error.
> >>>>>>> |    Use char because int might match the return type of a GCC
> >>>>>>> |    builtin and then its argument prototype would still apply.
> >>>>>>> */
> >>>>>>> | #ifdef __cplusplus
> >>>>>>> | extern "C"
> >>>>>>> | #endif
> >>>>>>> | char socket ();
> >>>>>>> | int
> >>>>>>> | main ()
> >>>>>>> | {
> >>>>>>> | return socket ();
> >>>>>>> |   ;
> >>>>>>> |   return 0;
> >>>>>>> | }
> >>>>>>> configure:3859: result: no
> >>>>>>> configure:3870: checking for library containing openpty
> >>>>>>> configure:3911: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include
> >>>>>>> conftest.c -
> >>>>>>> lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> /tmp/ccIN6CV4.o: In function `main':
> >>>>>>> /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/conftest.c:22:
> >>>>>>> undefined reference to `openpty'
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> configure:3917: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> |
> >>>>>>> | /* Override any GCC internal prototype to avoid an error.
> >>>>>>> |    Use char because int might match the return type of a GCC
> >>>>>>> |    builtin and then its argument prototype would still apply.
> >>>>>>> */
> >>>>>>> | #ifdef __cplusplus
> >>>>>>> | extern "C"
> >>>>>>> | #endif
> >>>>>>> | char openpty ();
> >>>>>>> | int
> >>>>>>> | main ()
> >>>>>>> | {
> >>>>>>> | return openpty ();
> >>>>>>> |   ;
> >>>>>>> |   return 0;
> >>>>>>> | }
> >>>>>>> configure:3911: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutil  -lnsl  -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:3917: $? = 0
> >>>>>>> configure:3945: result: -lutil
> >>>>>>> configure:3958: checking for bitset_new in -lutils
> >>>>>>> configure:3993: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils  -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:3999: $? = 0
> >>>>>>> configure:4017: result: yes
> >>>>>>> configure:4028: checking for proxy_svr_init in -lproxysvr
> >>>>>>> configure:4063: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lproxysvr  -lutils -lutil -lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:4069: $? = 0
> >>>>>>> configure:4087: result: yes
> >>>>>>> configure:4094: checking for proxy_clnt_init in -lproxyclnt
> >>>>>>> configure:4129: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lproxyclnt  -lutils -lutil -lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:4135: $? = 0
> >>>>>>> configure:4153: result: yes
> >>>>>>> configure:4162: checking for clock_gettime in -lposix4
> >>>>>>> configure:4197: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lposix4  -lutils -lutil -lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> /usr/bin/ld: cannot find -lposix4
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> configure:4203: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> |
> >>>>>>> | /* Override any GCC internal prototype to avoid an error.
> >>>>>>> |    Use char because int might match the return type of a GCC
> >>>>>>> |    builtin and then its argument prototype would still apply.
> >>>>>>> */
> >>>>>>> | #ifdef __cplusplus
> >>>>>>> | extern "C"
> >>>>>>> | #endif
> >>>>>>> | char clock_gettime ();
> >>>>>>> | int
> >>>>>>> | main ()
> >>>>>>> | {
> >>>>>>> | return clock_gettime ();
> >>>>>>> |   ;
> >>>>>>> |   return 0;
> >>>>>>> | }
> >>>>>>> configure:4221: result: no
> >>>>>>> configure:4247: checking how to run the C preprocessor
> >>>>>>> configure:4287: gcc -E  conftest.c
> >>>>>>> configure:4293: $? = 0
> >>>>>>> configure:4324: gcc -E  conftest.c
> >>>>>>> conftest.c:13:28: error: ac_nonexistent.h: No such file or
> >>>>>>> directory
> >>>>>>> configure:4330: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | #include <ac_nonexistent.h>
> >>>>>>> configure:4363: result: gcc -E
> >>>>>>> configure:4392: gcc -E  conftest.c
> >>>>>>> configure:4398: $? = 0
> >>>>>>> configure:4429: gcc -E  conftest.c
> >>>>>>> conftest.c:13:28: error: ac_nonexistent.h: No such file or
> >>>>>>> directory
> >>>>>>> configure:4435: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | #include <ac_nonexistent.h>
> >>>>>>> configure:4473: checking for grep that handles long lines and -e
> >>>>>>> configure:4547: result: /bin/grep
> >>>>>>> configure:4552: checking for egrep
> >>>>>>> configure:4630: result: /bin/grep -E
> >>>>>>> configure:4635: checking for ANSI C header files
> >>>>>>> configure:4665: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4671: $? = 0
> >>>>>>> configure:4770: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:4773: $? = 0
> >>>>>>> configure:4779: ./conftest
> >>>>>>> configure:4782: $? = 0
> >>>>>>> configure:4799: result: yes
> >>>>>>> configure:4823: checking for sys/types.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for sys/stat.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for stdlib.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for string.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for memory.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for strings.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for inttypes.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for stdint.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4823: checking for unistd.h
> >>>>>>> configure:4844: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4850: $? = 0
> >>>>>>> configure:4866: result: yes
> >>>>>>> configure:4885: checking for strings.h
> >>>>>>> configure:4891: result: yes
> >>>>>>> configure:4895: checking sys/time.h usability
> >>>>>>> configure:4912: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:4918: $? = 0
> >>>>>>> configure:4932: result: yes
> >>>>>>> configure:4936: checking sys/time.h presence
> >>>>>>> configure:4951: gcc -E  conftest.c
> >>>>>>> configure:4957: $? = 0
> >>>>>>> configure:4971: result: yes
> >>>>>>> configure:4999: checking for sys/time.h
> >>>>>>> configure:5007: result: yes
> >>>>>>> configure:4885: checking for unistd.h
> >>>>>>> configure:4891: result: yes
> >>>>>>> configure:5035: checking jni.h usability
> >>>>>>> configure:5052: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> conftest.c:59:17: error: jni.h: No such file or directory
> >>>>>>> configure:5058: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | #define STDC_HEADERS 1
> >>>>>>> | #define HAVE_SYS_TYPES_H 1
> >>>>>>> | #define HAVE_SYS_STAT_H 1
> >>>>>>> | #define HAVE_STDLIB_H 1
> >>>>>>> | #define HAVE_STRING_H 1
> >>>>>>> | #define HAVE_MEMORY_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_INTTYPES_H 1
> >>>>>>> | #define HAVE_STDINT_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_SYS_TIME_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | #include <stdio.h>
> >>>>>>> | #ifdef HAVE_SYS_TYPES_H
> >>>>>>> | # include <sys/types.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_SYS_STAT_H
> >>>>>>> | # include <sys/stat.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef STDC_HEADERS
> >>>>>>> | # include <stdlib.h>
> >>>>>>> | # include <stddef.h>
> >>>>>>> | #else
> >>>>>>> | # ifdef HAVE_STDLIB_H
> >>>>>>> | #  include <stdlib.h>
> >>>>>>> | # endif
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_STRING_H
> >>>>>>> | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
> >>>>>>> | #  include <memory.h>
> >>>>>>> | # endif
> >>>>>>> | # include <string.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_STRINGS_H
> >>>>>>> | # include <strings.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_INTTYPES_H
> >>>>>>> | # include <inttypes.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_STDINT_H
> >>>>>>> | # include <stdint.h>
> >>>>>>> | #endif
> >>>>>>> | #ifdef HAVE_UNISTD_H
> >>>>>>> | # include <unistd.h>
> >>>>>>> | #endif
> >>>>>>> | #include <jni.h>
> >>>>>>> configure:5072: result: no
> >>>>>>> configure:5076: checking jni.h presence
> >>>>>>> configure:5091: gcc -E  conftest.c
> >>>>>>> conftest.c:26:17: error: jni.h: No such file or directory
> >>>>>>> configure:5097: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | #define STDC_HEADERS 1
> >>>>>>> | #define HAVE_SYS_TYPES_H 1
> >>>>>>> | #define HAVE_SYS_STAT_H 1
> >>>>>>> | #define HAVE_STDLIB_H 1
> >>>>>>> | #define HAVE_STRING_H 1
> >>>>>>> | #define HAVE_MEMORY_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_INTTYPES_H 1
> >>>>>>> | #define HAVE_STDINT_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_SYS_TIME_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | #include <jni.h>
> >>>>>>> configure:5111: result: no
> >>>>>>> configure:5139: checking for jni.h
> >>>>>>> configure:5147: result: no
> >>>>>>> configure:5170: checking whether time.h and sys/time.h may  
> >>>>>>> both be
> >>>>>>> included
> >>>>>>> configure:5200: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:5206: $? = 0
> >>>>>>> configure:5221: result: yes
> >>>>>>> configure:5231: checking whether struct tm is in sys/time.h or
> >>>>>>> time.h
> >>>>>>> configure:5261: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> configure:5267: $? = 0
> >>>>>>> configure:5282: result: time.h
> >>>>>>> configure:5294: checking for working memcmp
> >>>>>>> configure:5347: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5350: $? = 0
> >>>>>>> configure:5356: ./conftest
> >>>>>>> configure:5359: $? = 0
> >>>>>>> configure:5375: result: yes
> >>>>>>> configure:5384: checking return type of signal handlers
> >>>>>>> configure:5412: gcc -c -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include   
> >>>>>>> conftest.c
> >>>>>>>> &5
> >>>>>>> conftest.c: In function 'main':
> >>>>>>> conftest.c:33: error: void value not ignored as it ought to be
> >>>>>>> configure:5418: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | #define STDC_HEADERS 1
> >>>>>>> | #define HAVE_SYS_TYPES_H 1
> >>>>>>> | #define HAVE_SYS_STAT_H 1
> >>>>>>> | #define HAVE_STDLIB_H 1
> >>>>>>> | #define HAVE_STRING_H 1
> >>>>>>> | #define HAVE_MEMORY_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_INTTYPES_H 1
> >>>>>>> | #define HAVE_STDINT_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_SYS_TIME_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define TIME_WITH_SYS_TIME 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | #include <sys/types.h>
> >>>>>>> | #include <signal.h>
> >>>>>>> |
> >>>>>>> | int
> >>>>>>> | main ()
> >>>>>>> | {
> >>>>>>> | return *(signal (0, 0)) (0) == 1;
> >>>>>>> |   ;
> >>>>>>> |   return 0;
> >>>>>>> | }
> >>>>>>> configure:5433: result: void
> >>>>>>> configure:5445: checking for vprintf
> >>>>>>> configure:5501: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> conftest.c:51: warning: conflicting types for built-in function
> >>>>>>> 'vprintf'
> >>>>>>> configure:5507: $? = 0
> >>>>>>> configure:5525: result: yes
> >>>>>>> configure:5532: checking for _doprnt
> >>>>>>> configure:5588: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> /tmp/ccc9lhXE.o: In function `main':
> >>>>>>> /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/conftest.c:63:
> >>>>>>> undefined reference to `_doprnt'
> >>>>>>> collect2: ld returned 1 exit status
> >>>>>>> configure:5594: $? = 1
> >>>>>>> configure: failed program was:
> >>>>>>> | /* confdefs.h.  */
> >>>>>>> | #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> | #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define PACKAGE_VERSION "2.1.2"
> >>>>>>> | #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> | #define PACKAGE_BUGREPORT ""
> >>>>>>> | #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> | #define VERSION "2.1.2"
> >>>>>>> | #define HAVE_LIBNSL 1
> >>>>>>> | #define HAVE_OPENPTY 1
> >>>>>>> | #define HAVE_LIBUTILS 1
> >>>>>>> | #define STDC_HEADERS 1
> >>>>>>> | #define HAVE_SYS_TYPES_H 1
> >>>>>>> | #define HAVE_SYS_STAT_H 1
> >>>>>>> | #define HAVE_STDLIB_H 1
> >>>>>>> | #define HAVE_STRING_H 1
> >>>>>>> | #define HAVE_MEMORY_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_INTTYPES_H 1
> >>>>>>> | #define HAVE_STDINT_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define HAVE_STRINGS_H 1
> >>>>>>> | #define HAVE_SYS_TIME_H 1
> >>>>>>> | #define HAVE_UNISTD_H 1
> >>>>>>> | #define TIME_WITH_SYS_TIME 1
> >>>>>>> | #define RETSIGTYPE void
> >>>>>>> | #define HAVE_VPRINTF 1
> >>>>>>> | /* end confdefs.h.  */
> >>>>>>> | /* Define _doprnt to an innocuous variant, in case <limits.h>
> >>>>>>> declares
> >>>>>>> _doprnt.
> >>>>>>> |    For example, HP-UX 11i <limits.h> declares gettimeofday.   
> >>>>>>> */
> >>>>>>> | #define _doprnt innocuous__doprnt
> >>>>>>> |
> >>>>>>> | /* System header to define __stub macros and hopefully few
> >>>>>>> prototypes,
> >>>>>>> |     which can conflict with char _doprnt (); below.
> >>>>>>> |     Prefer <limits.h> to <assert.h> if __STDC__ is defined,
> >>>>>>> since
> >>>>>>> |     <limits.h> exists even on freestanding compilers.  */
> >>>>>>> |
> >>>>>>> | #ifdef __STDC__
> >>>>>>> | # include <limits.h>
> >>>>>>> | #else
> >>>>>>> | # include <assert.h>
> >>>>>>> | #endif
> >>>>>>> |
> >>>>>>> | #undef _doprnt
> >>>>>>> |
> >>>>>>> | /* Override any GCC internal prototype to avoid an error.
> >>>>>>> |    Use char because int might match the return type of a GCC
> >>>>>>> |    builtin and then its argument prototype would still apply.
> >>>>>>> */
> >>>>>>> | #ifdef __cplusplus
> >>>>>>> | extern "C"
> >>>>>>> | #endif
> >>>>>>> | char _doprnt ();
> >>>>>>> | /* The GNU C library defines this for functions which it
> >>>>>>> implements
> >>>>>>> |     to always fail with ENOSYS.  Some functions are actually
> >>>>>>> named
> >>>>>>> |     something starting with __ and the normal name is an  
> >>>>>>> alias.
> >>>>>>> */
> >>>>>>> | #if defined __stub__doprnt || defined __stub____doprnt
> >>>>>>> | choke me
> >>>>>>> | #endif
> >>>>>>> |
> >>>>>>> | int
> >>>>>>> | main ()
> >>>>>>> | {
> >>>>>>> | return _doprnt ();
> >>>>>>> |   ;
> >>>>>>> |   return 0;
> >>>>>>> | }
> >>>>>>> configure:5611: result: no
> >>>>>>> configure:5636: checking for gethostname
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for select
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for strdup
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> conftest.c:54: warning: conflicting types for built-in function
> >>>>>>> 'strdup'
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for strstr
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> conftest.c:55: warning: conflicting types for built-in function
> >>>>>>> 'strstr'
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for strtoul
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for sigset
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for sighold
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5636: checking for sigrelse
> >>>>>>> configure:5692: gcc -o conftest -g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include    
> >>>>>>> conftest.c
> >>>>>>> -lutils -lutil -lnsl  -L../
> >>>>>>> org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828 >&5
> >>>>>>> configure:5698: $? = 0
> >>>>>>> configure:5716: result: yes
> >>>>>>> configure:5855: creating ./config.status
> >>>>>>>
> >>>>>>> ## ---------------------- ##
> >>>>>>> ## Running config.status. ##
> >>>>>>> ## ---------------------- ##
> >>>>>>>
> >>>>>>> This file was extended by org.eclipse.ptp.debug.sdm  
> >>>>>>> config.status
> >>>>>>> 2.1.2,
> >>>>>>> which was
> >>>>>>> generated by GNU Autoconf 2.61.  Invocation command line was
> >>>>>>>
> >>>>>>> CONFIG_FILES    =
> >>>>>>> CONFIG_HEADERS  =
> >>>>>>> CONFIG_LINKS    =
> >>>>>>> CONFIG_COMMANDS =
> >>>>>>> $ ./config.status
> >>>>>>>
> >>>>>>> on pc
> >>>>>>>
> >>>>>>> config.status:645: creating Makefile
> >>>>>>> config.status:645: creating config.h
> >>>>>>> config.status:888: config.h is unchanged
> >>>>>>> config.status:934: executing depfiles commands
> >>>>>>> configure:7136: === configuring in libaif
> >>>>>>> (/home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/libaif)
> >>>>>>> configure:7239: running /bin/bash ./configure
> >>>>>>> '--prefix=/home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.linux.x86_2.1.2.200905110828'  --cache-file=/ 
> >>>>>>> dev/
> >>>>>>> null --srcdir=.
> >>>>>>>
> >>>>>>> ## ---------------- ##
> >>>>>>> ## Cache variables. ##
> >>>>>>> ## ---------------- ##
> >>>>>>>
> >>>>>>> ac_cv_build=i686-pc-linux-gnu
> >>>>>>> ac_cv_c_compiler_gnu=yes
> >>>>>>> ac_cv_env_CC_set=
> >>>>>>> ac_cv_env_CC_value=
> >>>>>>> ac_cv_env_CFLAGS_set=
> >>>>>>> ac_cv_env_CFLAGS_value=
> >>>>>>> ac_cv_env_CPPFLAGS_set=
> >>>>>>> ac_cv_env_CPPFLAGS_value=
> >>>>>>> ac_cv_env_CPP_set=
> >>>>>>> ac_cv_env_CPP_value=
> >>>>>>> ac_cv_env_LDFLAGS_set=
> >>>>>>> ac_cv_env_LDFLAGS_value=
> >>>>>>> ac_cv_env_LIBS_set=
> >>>>>>> ac_cv_env_LIBS_value=
> >>>>>>> ac_cv_env_build_alias_set=
> >>>>>>> ac_cv_env_build_alias_value=
> >>>>>>> ac_cv_env_host_alias_set=
> >>>>>>> ac_cv_env_host_alias_value=
> >>>>>>> ac_cv_env_target_alias_set=
> >>>>>>> ac_cv_env_target_alias_value=
> >>>>>>> ac_cv_func__doprnt=no
> >>>>>>> ac_cv_func_gethostname=yes
> >>>>>>> ac_cv_func_memcmp_working=yes
> >>>>>>> ac_cv_func_select=yes
> >>>>>>> ac_cv_func_sighold=yes
> >>>>>>> ac_cv_func_sigrelse=yes
> >>>>>>> ac_cv_func_sigset=yes
> >>>>>>> ac_cv_func_strdup=yes
> >>>>>>> ac_cv_func_strstr=yes
> >>>>>>> ac_cv_func_strtoul=yes
> >>>>>>> ac_cv_func_vprintf=yes
> >>>>>>> ac_cv_header_inttypes_h=yes
> >>>>>>> ac_cv_header_jni_h=no
> >>>>>>> ac_cv_header_memory_h=yes
> >>>>>>> ac_cv_header_stdc=yes
> >>>>>>> ac_cv_header_stdint_h=yes
> >>>>>>> ac_cv_header_stdlib_h=yes
> >>>>>>> ac_cv_header_string_h=yes
> >>>>>>> ac_cv_header_strings_h=yes
> >>>>>>> ac_cv_header_sys_stat_h=yes
> >>>>>>> ac_cv_header_sys_time_h=yes
> >>>>>>> ac_cv_header_sys_types_h=yes
> >>>>>>> ac_cv_header_time=yes
> >>>>>>> ac_cv_header_unistd_h=yes
> >>>>>>> ac_cv_lib_nsl_gethostbyname=yes
> >>>>>>> ac_cv_lib_posix4_clock_gettime=no
> >>>>>>> ac_cv_lib_proxyclnt_proxy_clnt_init=yes
> >>>>>>> ac_cv_lib_proxysvr_proxy_svr_init=yes
> >>>>>>> ac_cv_lib_socket_socket=no
> >>>>>>> ac_cv_lib_utils_bitset_new=yes
> >>>>>>> ac_cv_objext=o
> >>>>>>> ac_cv_path_EGREP='/bin/grep -E'
> >>>>>>> ac_cv_path_GREP=/bin/grep
> >>>>>>> ac_cv_path_install='/usr/bin/install -c'
> >>>>>>> ac_cv_path_mkdir=/bin/mkdir
> >>>>>>> ac_cv_prog_AWK=mawk
> >>>>>>> ac_cv_prog_CPP='gcc -E'
> >>>>>>> ac_cv_prog_ac_ct_CC=gcc
> >>>>>>> ac_cv_prog_ac_ct_RANLIB=ranlib
> >>>>>>> ac_cv_prog_cc_c89=
> >>>>>>> ac_cv_prog_cc_g=yes
> >>>>>>> ac_cv_prog_cc_gcc_c_o=yes
> >>>>>>> ac_cv_prog_make_make_set=yes
> >>>>>>> ac_cv_search_openpty=-lutil
> >>>>>>> ac_cv_struct_tm=time.h
> >>>>>>> ac_cv_type_signal=void
> >>>>>>> am_cv_CC_dependencies_compiler_type=gcc3
> >>>>>>>
> >>>>>>> ## ----------------- ##
> >>>>>>> ## Output variables. ##
> >>>>>>> ## ----------------- ##
> >>>>>>>
> >>>>>>> ACLOCAL='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run
> >>>>>>> aclocal-1.10'
> >>>>>>> AMDEPBACKSLASH='\'
> >>>>>>> AMDEP_FALSE='#'
> >>>>>>> AMDEP_TRUE=''
> >>>>>>> AMTAR='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run tar'
> >>>>>>> AUTOCONF='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run
> >>>>>>> autoconf'
> >>>>>>> AUTOHEADER='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run
> >>>>>>> autoheader'
> >>>>>>> AUTOMAKE='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run
> >>>>>>> automake-1.10'
> >>>>>>> AWK='mawk'
> >>>>>>> CC='gcc'
> >>>>>>> CCDEPMODE='depmode=gcc3'
> >>>>>>> CFLAGS='-g -O2 -Wall
> >>>>>>> -I../org.eclipse.ptp.utils_2.1.2.200905110828/include
> >>>>>>> -I../org.eclipse.ptp.proxy_2.1.2.200905110828/include'
> >>>>>>> CLNT_LIBS=' -lproxyclnt'
> >>>>>>> CPP='gcc -E'
> >>>>>>> CPPFLAGS=''
> >>>>>>> CYGPATH_W='echo'
> >>>>>>> DEFS='-DHAVE_CONFIG_H'
> >>>>>>> DEPDIR='.deps'
> >>>>>>> ECHO_C=''
> >>>>>>> ECHO_N='-n'
> >>>>>>> ECHO_T=''
> >>>>>>> EGREP='/bin/grep -E'
> >>>>>>> EXEEXT=''
> >>>>>>> GREP='/bin/grep'
> >>>>>>> INSTALL_DATA='${INSTALL} -m 644'
> >>>>>>> INSTALL_PROGRAM='${INSTALL}'
> >>>>>>> INSTALL_SCRIPT='${INSTALL}'
> >>>>>>> INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
> >>>>>>> LDFLAGS=''
> >>>>>>> LIBOBJS=''
> >>>>>>> LIBS='-lutils -lutil -lnsl
> >>>>>>> -L../org.eclipse.ptp.utils_2.1.2.200905110828
> >>>>>>> -L../org.eclipse.ptp.proxy_2.1.2.200905110828'
> >>>>>>> LTLIBOBJS=''
> >>>>>>> MAKEINFO='${SHELL} /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/missing --run
> >>>>>>> makeinfo'
> >>>>>>> OBJEXT='o'
> >>>>>>> PACKAGE='org-eclipse-ptp-debug-sdm'
> >>>>>>> PACKAGE_BUGREPORT=''
> >>>>>>> PACKAGE_NAME='org.eclipse.ptp.debug.sdm'
> >>>>>>> PACKAGE_STRING='org.eclipse.ptp.debug.sdm 2.1.2'
> >>>>>>> PACKAGE_TARNAME='org-eclipse-ptp-debug-sdm'
> >>>>>>> PACKAGE_VERSION='2.1.2'
> >>>>>>> PATH_SEPARATOR=':'
> >>>>>>> PTPDBGJNI_FALSE=''
> >>>>>>> PTPDBGJNI_TRUE='#'
> >>>>>>> RANLIB='ranlib'
> >>>>>>> SET_MAKE=''
> >>>>>>> SHELL='/bin/bash'
> >>>>>>> STRIP=''
> >>>>>>> SVR_LIBS=' -lproxysvr'
> >>>>>>> VERSION='2.1.2'
> >>>>>>> ac_ct_CC='gcc'
> >>>>>>> am__fastdepCC_FALSE='#'
> >>>>>>> am__fastdepCC_TRUE=''
> >>>>>>> am__include='include'
> >>>>>>> am__isrc=''
> >>>>>>> am__leading_dot='.'
> >>>>>>> am__quote=''
> >>>>>>> am__tar='${AMTAR} chof - "$$tardir"'
> >>>>>>> am__untar='${AMTAR} xf -'
> >>>>>>> bindir='${exec_prefix}/bin'
> >>>>>>> build='i686-pc-linux-gnu'
> >>>>>>> build_alias=''
> >>>>>>> build_cpu='i686'
> >>>>>>> build_os='linux-gnu'
> >>>>>>> build_vendor='pc'
> >>>>>>> datadir='${datarootdir}'
> >>>>>>> datarootdir='${prefix}/share'
> >>>>>>> docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
> >>>>>>> dvidir='${docdir}'
> >>>>>>> exec_prefix='${prefix}'
> >>>>>>> host_alias=''
> >>>>>>> htmldir='${docdir}'
> >>>>>>> includedir='${prefix}/include'
> >>>>>>> infodir='${datarootdir}/info'
> >>>>>>> install_sh='$(SHELL) /home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.debug.sdm_2.1.2.200905110828/install-sh'
> >>>>>>> libdir='${exec_prefix}/lib'
> >>>>>>> libexecdir='${exec_prefix}/libexec'
> >>>>>>> localedir='${datarootdir}/locale'
> >>>>>>> localstatedir='${prefix}/var'
> >>>>>>> mandir='${datarootdir}/man'
> >>>>>>> mkdir_p='/bin/mkdir -p'
> >>>>>>> oldincludedir='/usr/include'
> >>>>>>> pdfdir='${docdir}'
> >>>>>>> prefix='/home/staehff/Desktop/eclipse/plugins/
> >>>>>>> org.eclipse.ptp.linux.x86_2.1.2.200905110828'
> >>>>>>> program_transform_name='s,x,x,'
> >>>>>>> psdir='${docdir}'
> >>>>>>> sbindir='${exec_prefix}/sbin'
> >>>>>>> sharedstatedir='${prefix}/com'
> >>>>>>> subdirs=' libaif'
> >>>>>>> sysconfdir='${prefix}/etc'
> >>>>>>> target_alias=''
> >>>>>>>
> >>>>>>> ## ----------- ##
> >>>>>>> ## confdefs.h. ##
> >>>>>>> ## ----------- ##
> >>>>>>>
> >>>>>>> #define PACKAGE_NAME "org.eclipse.ptp.debug.sdm"
> >>>>>>> #define PACKAGE_TARNAME "org-eclipse-ptp-debug-sdm"
> >>>>>>> #define PACKAGE_VERSION "2.1.2"
> >>>>>>> #define PACKAGE_STRING "org.eclipse.ptp.debug.sdm 2.1.2"
> >>>>>>> #define PACKAGE_BUGREPORT ""
> >>>>>>> #define PACKAGE "org-eclipse-ptp-debug-sdm"
> >>>>>>> #define VERSION "2.1.2"
> >>>>>>> #define HAVE_LIBNSL 1
> >>>>>>> #define HAVE_OPENPTY 1
> >>>>>>> #define HAVE_LIBUTILS 1
> >>>>>>> #define STDC_HEADERS 1
> >>>>>>> #define HAVE_SYS_TYPES_H 1
> >>>>>>> #define HAVE_SYS_STAT_H 1
> >>>>>>> #define HAVE_STDLIB_H 1
> >>>>>>> #define HAVE_STRING_H 1
> >>>>>>> #define HAVE_MEMORY_H 1
> >>>>>>> #define HAVE_STRINGS_H 1
> >>>>>>> #define HAVE_INTTYPES_H 1
> >>>>>>> #define HAVE_STDINT_H 1
> >>>>>>> #define HAVE_UNISTD_H 1
> >>>>>>> #define HAVE_STRINGS_H 1
> >>>>>>> #define HAVE_SYS_TIME_H 1
> >>>>>>> #define HAVE_UNISTD_H 1
> >>>>>>> #define TIME_WITH_SYS_TIME 1
> >>>>>>> #define RETSIGTYPE void
> >>>>>>> #define HAVE_VPRINTF 1
> >>>>>>> #define HAVE_GETHOSTNAME 1
> >>>>>>> #define HAVE_SELECT 1
> >>>>>>> #define HAVE_STRDUP 1
> >>>>>>> #define HAVE_STRSTR 1
> >>>>>>> #define HAVE_STRTOUL 1
> >>>>>>> #define HAVE_SIGSET 1
> >>>>>>> #define HAVE_SIGHOLD 1
> >>>>>>> #define HAVE_SIGRELSE 1
> >>>>>>>
> >>>>>>> configure: exit 0
> >>>>>>>
> >>>>>>> ---</ sh BUILD: config.log
> >>>>>>>> --------------------------------------------
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> ptp-user mailing list
> >>>>>>> ptp-user@xxxxxxxxxxx
> >>>>>>> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> ptp-user mailing list
> >>>>>> ptp-user@xxxxxxxxxxx
> >>>>>> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >>>>>
> >>>>> _______________________________________________
> >>>>> ptp-user mailing list
> >>>>> ptp-user@xxxxxxxxxxx
> >>>>> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >>>>
> >>>> _______________________________________________
> >>>> ptp-user mailing list
> >>>> ptp-user@xxxxxxxxxxx
> >>>> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >>>
> >>> _______________________________________________
> >>> ptp-user mailing list
> >>> ptp-user@xxxxxxxxxxx
> >>> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >>
> >> _______________________________________________
> >> ptp-user mailing list
> >> ptp-user@xxxxxxxxxxx
> >> https://dev.eclipse.org/mailman/listinfo/ptp-user
> >
> > _______________________________________________
> > ptp-user mailing list
> > ptp-user@xxxxxxxxxxx
> > https://dev.eclipse.org/mailman/listinfo/ptp-user
> 
> _______________________________________________
> ptp-user mailing list
> ptp-user@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/ptp-user



Back to the top