Re: [ptp-user] Help with PTP & RSE and remote c project -- Please help

[gary mazzaferro <garym@xxxxxxxxxx>]

Thanks Chris,

I thought RSE was part of PTP... thanks for the pointer. 

I tried this same action on linux and built with openMPI, it seems to work on a 8-way processor with 1 VM per core. The next steps are getting opensolaris working and bridging MPI over infiniband to another 8-way. 

It looks like most of the issues I was having with installation were pegged by Beth and Vivian...thanks (and everyone else as well) !!  

I'm going to run down the RSE issues with the DSDP team. When I get done, I'll post the summary to the ptp-user list.

cheers,
gary

On Fri, Jun 19, 2009 at 6:41 AM, Chris Recoskie <recoskie@xxxxxxxxxx> wrote:

It sounds like there are some underlying problems in RSE on Solaris, or that maybe your setup still has problems. I would suggest taking these up with RSE team on the DSDP-TM newsgroup.

I can comment to a couple of other issues:

> Issue 3 -Create Project Dialog:
> An old remote project deleted on the remote cannot be deleted from
> the workspace.


You can't get at the workspace really from the New Remote C/C++ Project wizard, so I'm not sure why you think you should be able to delete projects from here.

Issue 3 was mis-categorized. (My bad, the end of a day that started at 2am) This problem occurred in the project explorer

> Issue 4 -Create Project Dialog:
> Once an duplicate project name is typed, the " A project with that
> name already exists in the workspace." message appears and cannot be
> cleared until the Create Project Dialog is close. This prevents
> incremental naming ie Project, Project1, Project2, etc..


If you keep typing, the error should go away...

I type to 15 additional additional characters and waited 15 minutes to see if the condition would clear before considering it an issue. 

===========================
Chris Recoskie
Team Lead, IBM CDT and RDT
IBM Toronto

gary mazzaferro <garym@xxxxxxxxxx>

gary mazzaferro <garym@xxxxxxxxxx>
Sent by: ptp-user-bounces@xxxxxxxxxxx

06/18/2009 05:13 PM

Please respond to
PTP User list <ptp-user@xxxxxxxxxxx>

To	PTP User list <ptp-user@xxxxxxxxxxx>
cc
Subject		Re: [ptp-user] Help with PTP & RSE and remote c project -- Please help

Quick update,

I tried a different sequence creating the project.
First setting the project name, then setting the remote destination. Result: Dialog message "Project location directory must be specified"

It appears the path state is not set in the create dialog.

-gary


On Thu, Jun 18, 2009 at 3:03 PM, gary mazzaferro <garym@xxxxxxxxxx> wrote:

Hi Beth,

Sorry it took so long,

I did get it installed but couldn't get to the point of creating a remote project.

-g

These are my issues:

1) garym@opensolaris:~$ java -version

java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03)
Java HotSpot(TM) Server VM (build 11.3-b02, mixed mode)


2) Installs OK, no problems

3) Connect OK

Issue 1:
Browse My Processes

Server running on: opensolaris

java.lang.Exception: No handler for this system type
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.lookupProcesses(UniversalProcessMiner.java:251)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleQuery(UniversalProcessMiner.java:230)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleCommand(UniversalProcessMiner.java:113)
    at org.eclipse.dstore.core.miners.Miner.command(Miner.java:303)
    at org.eclipse.dstore.core.miners.Miner.handle(Miner.java:221)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)


Issue 2:
While Creating a project a dialog pops up:
An internal error occurred during: "Periodic workspace save.".
java.lang.NullPointerException

Issue 3 -Create Project Dialog:
An old remote project deleted on the remote cannot be deleted from the workspace.


Issue 4 -Create Project Dialog:
Once an duplicate project name is typed, the " A project with that name already exists in the workspace." message appears and cannot be cleared until the Create Project Dialog is close. This prevents incremental naming ie Project, Project1, Project2, etc..

Issue 5 -Create Project Dialog:
The remote selected project directory never reaches the "next" or "finish" state, Remote projects cannot be created.


=====================================================================


On Thu, Jun 18, 2009 at 10:51 AM, gary mazzaferro <garym@xxxxxxxxxx> wrote:
Thanks Beth,

I know its tough getting all the parts to play when your close to the release date. Each day is *interesting*.

Today is thursday, are you going to get the PLDT code checked in for monday's daily (weekly) ?

I'll run through the procedure, give me a few minutes..

-gary


On Thu, Jun 18, 2009 at 10:39 AM, Beth Tibbitts <tibbitts@xxxxxxxxxx> wrote:
Hi Gary,
Sorry you are having trouble. Galileo (Eclipse 3.5 including CDT 6.0) is about to be released, so you are on the bleeding edge of all these pieces. Blood is lessening since the final builds should now be stable.
PTP 3.0 relies on Eclipse 3.5 and CDT 6.0 so we are tracking them.

Some of PLDT 3.0 (analysis part of PTP) might not be updated exactly right (I can see by some of your error messages that this is the case for some of PLDT, esp. UPC support, cdt pre-reqs and pldt versions are not fixed yet). However I didn't *think* that would break anything. yet.
I will try to get that (pldt) updated this week.

Let's make sure your base eclipse installation is ok...
I started writing instructions here but decided to start updating the 3.0 release notes here:
http://wiki.eclipse.org/PTP/release_notes/3.0

So try that and let us know how you fare.


...Beth

Beth Tibbitts (859) 243-4981 (TL 545-4981)
Eclipse Parallel Tools Platform http://eclipse.org/ptp
Mailing Address: IBM Corp., Coldstream Research Campus, 745 West New Circle Road, Lexington, KY 40511


gary mazzaferro ---06/15/2009 09:45:37 PM---Hi Greg,


gary mazzaferro <garym@xxxxxxxxxx>
Sent by: ptp-dev-bounces@xxxxxxxxxxx

06/15/2009 09:39 PM


Please respond to
Parallel Tools Platform general developers <ptp-dev@xxxxxxxxxxx>

To		Parallel Tools Platform general developers <ptp-dev@xxxxxxxxxxx>
cc
Subject		Re: [ptp-dev] Re: [ptp-user] Help with PTP & RSE and remote c project -- Please help


Hi Greg,

Thanks for following up.

Followed your instructions, tried RSE 3.1RC4  and nightly Version: 3.1.0.N20090615-0100-7L5A78OqaCDxE64pJ4RSh6Isr9n3 Build id: N20090615-0100
Each have the same problem it can't find the ui component and the build still does nothing, I'm thinking the build event its not hooked in. Maybe because the problem with the bundle.

Good news, no exceptions on the server :)

It looks like your internal SDKs are significantly different from the released code and the nightly builds on the site.  If your putting out nightly builds someone has to be using them and has an sdk  build that works.

-gary

I've included the errors


When loading
eclipse.buildId=I20090605-1444
java.version=1.6.0_13
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments:  -os win32 -ws win32 -arch x86


Info
Mon Jun 15 19:14:26 MDT 2009
in SubSystemConfiguration.getSubSytems(conn, force) - returning empty array

eclipse.buildId=I20090605-1444
java.version=1.6.0_13
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments:  -os win32 -ws win32 -arch x86


Error
Mon Jun 15 19:16:46 MDT 2009
Contributor org.eclipse.ui.navigator.ProjectExplorer cannot be created.

org.eclipse.core.runtime.CoreException: Plug-in "org.eclipse.ui.navigator.resources" was unable to instantiate class "org.eclipse.ui.internal.navigator.resources.workbench.TabbedPropertySheetTitleProvider".
    at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.throwException(RegistryStrategyOSGI.java:180)
    at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(RegistryStrategyOSGI.java:172)
    at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionRegistry.java:874)
    at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(ConfigurationElement.java:243)
    at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(ConfigurationElementHandle.java:51)
    at org.eclipse.ui.internal.views.properties.tabbed.view.TabbedPropertyRegistry.<init>(TabbedPropertyRegistry.java:127)
    at org.eclipse.ui.internal.views.properties.tabbed.view.TabbedPropertyRegistryFactory.createRegistry(TabbedPropertyRegistryFactory.java:74)
    at org.eclipse.ui.views.properties.tabbed.TabbedPropertySheetPage.initContributor(TabbedPropertySheetPage.java:406)
    at org.eclipse.ui.views.properties.tabbed.TabbedPropertySheetPage.<init>(TabbedPropertySheetPage.java:295)
    at org.eclipse.ui.views.properties.tabbed.TabbedPropertySheetPage.<init>(TabbedPropertySheetPage.java:274)
    at org.eclipse.ui.internal.navigator.resources.workbench.TabbedPropertySheetAdapterFactory.getAdapter(TabbedPropertySheetAdapterFactory.java:40)
    at org.eclipse.core.internal.adapter.AdapterFactoryProxy.getAdapter(AdapterFactoryProxy.java:80)
    at org.eclipse.core.internal.runtime.AdapterManager.getAdapter(AdapterManager.java:293)
    at org.eclipse.ui.part.WorkbenchPart.getAdapter(WorkbenchPart.java:151)
    at org.eclipse.ui.navigator.CommonNavigator.getAdapter(CommonNavigator.java:432)
    at org.eclipse.ui.internal.views.ViewsPlugin.getAdapter(ViewsPlugin.java:103)
    at org.eclipse.ui.views.properties.PropertySheet.doCreatePage(PropertySheet.java:181)
    at org.eclipse.ui.part.PageBookView.createPage(PageBookView.java:409)
    at org.eclipse.ui.part.PageBookView.partActivated(PageBookView.java:752)
    at org.eclipse.ui.views.properties.PropertySheet.partActivated(PropertySheet.java:304)
    at org.eclipse.ui.part.PageBookView.showBootstrapPart(PageBookView.java:921)
    at org.eclipse.ui.part.PageBookView.createPartControl(PageBookView.java:492)
    at org.eclipse.ui.views.properties.PropertySheet.createPartControl(PropertySheet.java:132)
    at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:367)
    at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:226)
    at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
    at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:313)
    at org.eclipse.ui.internal.ViewPane.setVisible(ViewPane.java:529)
    at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:180)
    at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:270)
    at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
    at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:473)
    at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
    at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:668)
    at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:576)
    at org.eclipse.ui.internal.PartSashContainer.createControl(PartSashContainer.java:568)
    at org.eclipse.ui.internal.PerspectiveHelper.activate(PerspectiveHelper.java:272)
    at org.eclipse.ui.internal.Perspective.onActivate(Perspective.java:981)
    at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:3608)
    at org.eclipse.ui.internal.WorkbenchPage.busySetPerspective(WorkbenchPage.java:1037)
    at org.eclipse.ui.internal.WorkbenchPage.access$16(WorkbenchPage.java:1021)
    at org.eclipse.ui.internal.WorkbenchPage$19.run(WorkbenchPage.java:3709)
    at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
    at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:3707)
    at org.eclipse.ui.handlers.ShowPerspectiveHandler.openPerspective(ShowPerspectiveHandler.java:152)
    at org.eclipse.ui.handlers.ShowPerspectiveHandler.openOther(ShowPerspectiveHandler.java:124)
    at org.eclipse.ui.handlers.ShowPerspectiveHandler.execute(ShowPerspectiveHandler.java:63)
    at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:294)
    at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476)
    at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:178)
    at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.java:247)
    at org.eclipse.ui.actions.PerspectiveMenu.runOther(PerspectiveMenu.java:376)
    at org.eclipse.ui.actions.PerspectiveMenu$3.runWithEvent(PerspectiveMenu.java:130)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3880)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3473)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
    at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: java.lang.NullPointerException
    at org.eclipse.ui.internal.navigator.resources.workbench.TabbedPropertySheetTitleProvider.<init>(TabbedPropertySheetTitleProvider.java:44)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
    at java.lang.reflect.Constructor.newInstance(Unknown Source)
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(RegistryStrategyOSGI.java:170)
    ... 78 more




On Mon, Jun 15, 2009 at 5:07 PM, Greg Watson <g.watson@xxxxxxxxxxxx> wrote:
Gary,

Unfortunately Galileo is still in the process of being released, so things are a bit fragmented at the moment. This will change when Galileo is released at the end of the month.

It looks like the RSE 3.1RC4 zip doesn't include an update site. You can't install plugins by unzipping them into the Eclipse installation directory any more, so I'd say this is the cause of your problems with RSE. You need to unzip them into the "dropins" directory that is in the Eclipse installation directory instead.

Once you have RSE installed, download the latest CDT zip file from http://download.eclipse.org/tools/cdt/builds/6.0.0 and install it as an archive using the update manager.

You should be able to download the latest PTP build and install it as an archive at this point.

Let me know if you still have problems.

Regards,

Greg


On Jun 15, 2009, at 4:55 PM, gary mazzaferro wrote:
Hi Vivian,

I tried the install, it worked :) :) , stuff is still very broken.  I'll walk you though my procedure


1) Downloaded 3.1 RC4
2) Attempted to load as a site, the 3.1 RC4 does not install as a site. The files need to be copied into the eclipse directory
3) Started eclipse, eclipse 3.5 doesn't like 3.1 RC4, it complains about the views not being able to be saved. There is no remote explorer view !!! I think the install is not well.
4) I could open the remote cdt project, (asked for password) I still cannot remote build or or launch gcc scanner. The build does not execute or offer any warning messages.
NOTE: the remote server shows no exceptions at this point :)

5) Loaded RSE 3.0. shutdown
6) Copied 3.1 RC4 back into eclipse
7) Started and opened a remote explorer view. It worked this time, but I think it was the 3.0 version.
8) I could open the remote cdt project, (asked for password) I still cannot remote build or or launch gcc scanner.
9) Using the remote explored I attempted to view the processes, exceptions on the server popped up immediately.

Summary:
PTP doesn't install with the released galileo cdt download, the generic galileo is needed and cdt-master-6.0.0-I200906151036 needs to be installed manually
The newest version of rtd server build I200906021621, seems much better behaved than earlier versions under opensolaris, although the perl daemon is broken
Enumerating the processes with the 3.0 remote explorer causes rtd server to throw execeptions
RSE 3.1 RC4 download doesn't install properly and not working with eclipse 3.5. The zip file is not a "site" file
None of the versions of RSE can execute the gcc compiler on opensolaris. The build does not execute or offer any warning messages.
I'm in not much better position now than when I started 11 hrs ago, except a bit more frustrated.

Personal comments:

I do not believe I have the build configuration correct for  opensolaris. Is there a way for the build to execute via ssh or rconsole ?


thanks for all your support.

gary









On Mon, Jun 15, 2009 at 1:19 PM, gary mazzaferro <garym@xxxxxxxxxx> wrote:
Thank you Vivian !!!

I'll give it a try..

-g


On Mon, Jun 15, 2009 at 1:16 PM, Vivian Kong <vivkong@xxxxxxxxxx> wrote:
There are known problems in RDT included PTP 3.0 builds prior to June 2. Please try and install the following in order:

Eclipse 3.5
CDT 6.0: http://download.eclipse.org/tools/cdt/builds/6.0.0/index.html
RSE 3.1: http://download.eclipse.org/dsdp/tm/downloads/index.php
PTP/RDT 3.0 (June 2 or later builds)

Regards,

Vivian Kong
IBM Eclipse CDT
IBM Canada Toronto Lab

<graycol.gif>gary mazzaferro ---06/15/2009 03:01:09 PM---Hi Beth,

<ecblank.gif> From:		<ecblank.gif> gary mazzaferro <garym@xxxxxxxxxx>
<ecblank.gif> To:		<ecblank.gif> Parallel Tools Platform general developers <ptp-dev@xxxxxxxxxxx>
<ecblank.gif> Date:	<ecblank.gif> 06/15/2009 03:01 PM
<ecblank.gif> Subject:	<ecblank.gif> Re: [ptp-dev] Re: [ptp-user] Help with PTP & RSE and remote c project -- Please help
<ecblank.gif> Sent by:		<ecblank.gif> ptp-dev-bounces@xxxxxxxxxxx

---





Hi Beth,

I think the build and test environment is a little out of wack with the releases.

I tried to a few different installs methods
1) Down load the 3.5 sdk and add cdt 5.0 then there is a conflict with cdt 5/6
2) Down load the 3.5 sdk and add ptp 3.0. This results in a missing udp 5.0.0
3) Down load the 3.5 sdk w/ ptp 3.0 remote added and try to download cdt 5.0. This results in a conflict with .cdt 5.0 installing over a cdt 6.0 core.

How can someone out of IBM can use ptp ?

Is there a proceedure of patches or something ?

cheers,
gary


Here are the error logs from the installs:




On Mon, Jun 15, 2009 at 11:20 AM, gary mazzaferro <garym@xxxxxxxxxx> wrote:
Hi Beth,

I don't think cdt 6.0 has been out that long... production doesn't like to change very often, I was on eclipse 3.1 until last week. (don't laugh)

Is this a difficult fix ?

-g


On Mon, Jun 15, 2009 at 10:59 AM, Beth Tibbitts <tibbitts@xxxxxxxxxx> wrote:
>I'm on stuck with ppt looking for upc 5.0.0 from cdt. Which version of cdt are you using ?
>I have CDT Version: 6.0.0.200906081036 Build id: 200906081036
My bad. PLDT pre-reqs should be updated to match CDT 6.0.
Trying to figure out why this didn't show up earlier...


...Beth

Beth Tibbitts (859) 243-4981 (TL 545-4981)
Eclipse Parallel Tools Platform http://eclipse.org/ptp
Mailing Address: IBM Corp., Coldstream Research Campus, 745 West New Circle Road, Lexington, KY 40511

<graycol.gif>gary mazzaferro ---06/15/2009 12:23:58 PM---Hi Greg,
gary mazzaferro <garym@xxxxxxxxxx>
Sent by: ptp-dev-bounces@xxxxxxxxxxx

06/15/2009 12:22 PM


Please respond to
Parallel Tools Platform general developers <ptp-dev@xxxxxxxxxxx>

<ecblank.gif> To	<ecblank.gif> Parallel Tools Platform general developers <ptp-dev@xxxxxxxxxxx>
<ecblank.gif> cc	<ecblank.gif>
<ecblank.gif> Subject	<ecblank.gif> Re: [ptp-dev] Re: [ptp-user] Help with PTP & RSE and remote c project -- Please help

<ecblank.gif>

<ecblank.gif>


Hi Greg,

You better hold off on looking into this, it may be a non-issue or "operator error" problem.

I just tried the download and install the latest master ptp package. I just realized the install failed., I looked at the logs to find out. BTW, there was NO WARNING MESSAGE  to tell me the install failed, only a reboot dialog for the"changes" to take effect.

I'm on stuck with ppt looking for upc 5.0.0 from cdt. Which version of cdt are you using ? I have CDT Version: 6.0.0.200906081036 Build id: 200906081036
BTW, the latest on the  cdt web site is 03.18.2009.  the one I have appears to be a later build.

Sorry for the confusion.

cheers,
gary

Here is the error message:

Error
Mon Jun 15 09:52:59 MDT 2009
Missing requirement: UPC support for PLDT 2.1.0.200906021621 (org.eclipse.ptp.pldt.upc 2.1.0.200906021621) requires 'bundle org.eclipse.cdt.core.parser.upc 5.0.0' but it could not be found







On Mon, Jun 15, 2009 at 9:36 AM, gary mazzaferro <garym@xxxxxxxxxx> wrote:
Hi Greg,

The same results, with one exception I can see the .c file in the project 'src' folder.  I'm not sure if that is a result of the new server code or an artifact of restarting eclipse.

cheers,
gary

Here's the server Exception:

# DStore Server Starting...
Server Started Successfully
4033
java.lang.Exception: No handler for this system type
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.lookupProcesses(UniversalProcessMiner.java:251)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleQuery(UniversalProcessMiner.java:230)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleCommand(UniversalProcessMiner.java:113)
    at org.eclipse.dstore.core.miners.Miner.command(Miner.java:303)
    at org.eclipse.dstore.core.miners.Miner.handle(Miner.java:221)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)
java.lang.Exception: No handler for this system type
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.lookupProcesses(UniversalProcessMiner.java:251)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleQuery(UniversalProcessMiner.java:230)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleCommand(UniversalProcessMiner.java:113)
    at org.eclipse.dstore.core.miners.Miner.command(Miner.java:303)
    at org.eclipse.dstore.core.miners.Miner.handle(Miner.java:221)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)



On Mon, Jun 15, 2009 at 9:21 AM, gary mazzaferro <garym@xxxxxxxxxx> wrote:
Thanks for the update, I originally started with 3.5 (galileo) and back rev'd to 3.4 because it appeared more people were having success with this build.

Give me a couple of minutes, I'll get the nightly and let you know how it turns out.

-g


On Mon, Jun 15, 2009 at 9:13 AM, Greg Watson <g.watson@xxxxxxxxxxxx> wrote:
Gary,

I should have read your post in more detail. I now see you're using Eclipse 3.4 and PTP 2.1.2. Unfortunately this is a bug in RSE 3.0 that will only be fixed in RSE 3.1 (the RSE people are not releasing any more 3.0 versions), which means you'll need to upgrade to Eclipse 3.5 and use one of the PTP 3.0 builds from http://wiki.eclipse.org/PTP/builds.

Regards,

Greg

On Jun 15, 2009, at 11:07 AM, gary mazzaferro wrote:
Hi Greg,

I just tried June 2  with the same results. I don't think the fix made it in to the build.

cheers
-gary


# DStore Server Starting...
Server Started Successfully
4033
java.lang.Exception: No handler for this system type
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.lookupProcesses(UniversalProcessMiner.java:251)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleQuery(UniversalProcessMiner.java:230)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleCommand(UniversalProcessMiner.java:113)
    at org.eclipse.dstore.core.miners.Miner.command(Miner.java:303)
    at org.eclipse.dstore.core.miners.Miner.handle(Miner.java:221)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)
java.lang.Exception: No handler for this system type
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.lookupProcesses(UniversalProcessMiner.java:251)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleQuery(UniversalProcessMiner.java:230)
    at org.eclipse.rse.dstore.universal.miners.UniversalProcessMiner.handleCommand(UniversalProcessMiner.java:113)
    at org.eclipse.dstore.core.miners.Miner.command(Miner.java:303)
    at org.eclipse.dstore.core.miners.Miner.handle(Miner.java:221)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)



On Mon, Jun 15, 2009 at 8:54 AM, Greg Watson <g.watson@xxxxxxxxxxxx> wrote:
FYI, last Friday's build failed. I'll re-run today.

Greg

On Jun 15, 2009, at 10:34 AM, gary mazzaferro wrote:
Hi Chris.

Thanks so much for the help.... I'm cross posting this on ptp-user.

>From the comments in the bug, it sounds like the issue has been resolved.

Do you think this fix in the nightly builds ? or do I need to checkout the sources ?

cheers,
gary

Comments from bug: https://bugs.eclipse.org/bugs/show_bug.cgi?id=277764

------- Comment #13 From Vivian Kong 2009-05-27 14:36:19 -0400 -------

No more exception.  Looks good!
------- Comment #14 >From David McKnight 2009-05-27 14:45:30 -0400 -------

I've committed the patch to cvs.
------- Comment #15 From Martin Oberhuber 2009-05-27 15:15:57 -0400 -------

Glad it helped, odd as it may be. I'll squeeze it into RC2.







On Mon, Jun 15, 2009 at 7:05 AM, Chris Recoskie <recoskie@xxxxxxxxxx> wrote:

The exception you are seeing is an RSE bug... see https://bugs.eclipse.org/bugs/show_bug.cgi?id=277764

This causes the server to be completely broken, so any subsequent operations are unlikely to work.

===========================
Chris Recoskie
Team Lead, IBM CDT and RDT
IBM Toronto
<graycol.gif>gary mazzaferro <garym@xxxxxxxxxx>

<ecblank.gif>

gary mazzaferro <garym@xxxxxxxxxx>

Sent by: ptp-user-bounces@xxxxxxxxxxx

06/14/2009 09:47 AM


Please respond to
PTP User list <ptp-user@xxxxxxxxxxx>

<ecblank.gif> To	<ecblank.gif> ptp-user@xxxxxxxxxxx
<ecblank.gif> cc	<ecblank.gif>
<ecblank.gif> Subject	<ecblank.gif> [ptp-user] Help with PTP & RSE and remote c project -- Please help

<ecblank.gif>

<ecblank.gif>


Hi,

I'm new to ptp and remote building on cdt. Please be patient.. I'm probably doing something wrong

I'm having some issues with properly connecting to  the target, creating a remote project and getting the project to build.

I installed rdt-server-unix-1.0.tar on an opensolaris 113a
I installed ptp version 2.1.2.200905110828 and cdt version 5.0.2.200902130801 on Ganymede 3.4.2

I can execute the remote server software (./server.sh 4033)
And I can connect to the server with RSE.
However, when connected, there are some java errors on the remote server:

java.lang.
IllegalAccessException: Class org.eclipse.dstore.internal.core.util.MemoryManager can not access a member of class sun.management.MemoryPoolImpl with modifiers "public"
    at sun.reflect.Reflection.ensureMemberAccess(Reflection.java:65)
    at java.lang.reflect.Method.invoke(Method.java:588)
    at org.eclipse.dstore.internal.core.util.MemoryManager.init(MemoryManager.java:62)
    at org.eclipse.dstore.internal.core.util.MemoryManager.<init>(MemoryManager.java:31)
    at org.eclipse.dstore.internal.core.util.MemoryManager.getInstance(MemoryManager.java:37)
    at org.eclipse.dstore.internal.core.util.DataElementRemover.<init>(DataElementRemover.java:53)
    at org.eclipse.dstore.core.model.DataStore.startDataElementRemoverThread(DataStore.java:3687)
    at org.eclipse.dstore.internal.core.server.ServerCommandHandler.sendCommands(ServerCommandHandler.java:279)
    at org.eclipse.dstore.core.model.CommandHandler.handle(CommandHandler.java:110)
    at org.eclipse.dstore.core.model.Handler.run(Handler.java:135)

I'm assuming this is normal ??

Second issue, the My Home filter was empty, I needed to delete it and recreate it. Is this normal ?

Third, I try to create a remote c or c+ project, I'm a little confused on exactly what I should do or if the steps I'm taking are correct.

1) I enter a project name.
2) The Dialog says create a new c/c++ project, but the project type only displays "Empty Project"  I this correct ?
3) The Tool chain selected is solaris gcc (this looks right).
4) Project location gives me 3 options, local (not the correct setting for me), RSE and Remote Tools. I'm assuming I should be using RSE. I'm not sure if it should be Remote Tools.
5) I select a folder on the remote system from the "my Home" filter
6) Validate the Solaris GCC on the next dialog,
7) Configure the builds and Indexing services to RDT/RSE and Remote Indexing to the server, Hit ok
8) I gety a message to override the project settings, I hit ok.
9) I eclipse displays an error dialog box::
"C/C++ Indexer has encountered a problem"
An internal error occured during "C/C++ Indexer"
java.language.NullPointerException

9a) The problem view gives me 2 messages:
Description    Resource    Path    Location    Type
Error launching external scanner info generator (g++ -E -P -v -dD C:/Users/xxxx.xxxxxxx/workspace/.metadata/.plugins/org.eclipse.cdt.make.core/specs.cpp)    hinge        Unknown    C/C++ Problem
Description    Resource    Path    Location    Type
Error launching external scanner info generator (gcc -E -P -v -dD C:/Users/xxxx.xxxx xxx/workspace/.metadata/.plugins/org.eclipse.cdt.make.core/specs.cpp)    hinge        Unknown    C/C++ Problem


9b) The log file error is:
!ENTRY org.eclipse.cdt.core 4 4 2009-06-14 06:49:37.756
!MESSAGE Error
!STACK 0
java.lang.NullPointerException
 at org.eclipse.ptp.internal.rdt.core.index.RemoteIndexLifecycleService.update(RemoteIndexLifecycleService.java:93)
 at org.eclipse.ptp.internal.rdt.core.index.RemoteIndexerTask.run(RemoteIndexerTask.java:84)
 at org.eclipse.cdt.internal.core.pdom.indexer.PDOMRebuildTask.run(PDOMRebuildTask.java:84)
 at org.eclipse.cdt.internal.core.pdom.PDOMIndexerJob.run(PDOMIndexerJob.java:94)
 at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)!ENTRY org.eclipse.core.jobs 4 2 2009-06-14 06:49:37.758

!MESSAGE An internal error occurred during: "C/C++ Indexer".
!STACK 0
java.lang.NullPointerException
 at org.eclipse.ptp.internal.rdt.core.index.RemoteIndexLifecycleService.update(RemoteIndexLifecycleService.java:93)
 at org.eclipse.ptp.internal.rdt.core.index.RemoteIndexerTask.run(RemoteIndexerTask.java:84)
 at org.eclipse.cdt.internal.core.pdom.indexer.PDOMRebuildTask.run(PDOMRebuildTask.java:84)
 at org.eclipse.cdt.internal.core.pdom.PDOMIndexerJob.run(PDOMIndexerJob.java:94)
 at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

10) I select the project explorer view and create 2 folders; src and Debug. Both show on the RSE view as directories under the directory selected for the project.
11) I, the project explorer view, I create c source file by right click and selecing new c source file from the popup menu
12) the dialog displays and has the correct path to the "src" folder.
13) The file is created, an Indesxer waring message is again displyed, and the file can be seen in the RSE view. However, the file does not show up in the project !!!
14) I refresh the project view, the expand arrow shows for the src folder, but when clicked, it disappears.
15) I try bulding, no action is noted. Probably no files in the project view.
16) I can compile from the RSE view, but recieve this error message in the remote shell view:
/root>cd /export/home/xxxx/Workspace/src
         cd /export/home/xxxx/Workspace/src
         gcc  -c main.c -o main.o
         -l: bad option(s)
> Shell Completed (exit code = 1)

17) The compile from the RSE view only seems to execute once.

Ok, What am I doing wrong ?? Dids I forget to configure something ?  Please help !!!

Best Regards


gary_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev

_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev
_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev
_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev



_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev
_______________________________________________
ptp-dev mailing list
ptp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-dev


_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user

_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user

_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user