[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
RE: [ptp-user] How do i start my remote builds ? - posted again
|
Success !
Greg I follow your instructions, made a clean installation and I'm a happy remote builder :)
Lesson to learn; never give up....
Is it possilbe to change the make cmd and give parameters like
make my-cross-compiler
Thanks for help Greg
Joachim
________________________________________
From: ptp-user-bounces@xxxxxxxxxxx [ptp-user-bounces@xxxxxxxxxxx] On Behalf Of Greg Watson [g.watson@xxxxxxxxxxxx]
Sent: 15 January 2009 16:58
To: PTP User list
Subject: Re: [ptp-user] How do i start my remote builds ? - posted again
Here's what I did:
Install Eclipse 3.4.1
Install latest CDT (5.0.2-I200901090802)
Install RSE from Ganymede update site using update manager (Remote
System Explorer End-User Runtime)
Install latest PTP and RDT (2.1.1-I200901091901) from http://wiki.eclipse.org/PTP/builds/2.1.1
Install latest RDT server somewhere (get from http://wiki.eclipse.org/PTP/builds/2.1.1)
Switch to Remote System Explorer perspective
Create dstore connection as per the RDT instructions (http://wiki.eclipse.org/PTP/rdt-setup
)
Switch to "Remote C/C++ Development" perspective
Outside Eclipse, create a new empty directory and launch the dstore
server
Start the "New Remote C/C++ Project" wizard
Choose the dstore connection and the empty directory for the location
Keep selecting "Next" until the "Configure Services" page
Configure both the "Build" and "C/C++ Indexing" service to use the RSE
dstore connection
Select "Finish"
Unselect "Build Automatically" from the "Project" menu
Create a makefile
Create a source file
Right click on the project and select "Build Project"
The project built at this point.
Greg
On Jan 14, 2009, at 4:43 PM, Joachim Osbeck wrote:
>
> Yes it's a RSE SSH connection - do I need the rdt server (at Linux
> box) to execute gcc/g++ ?
>
> Greg - does it work for you ? Please descibe your installation/setup/
> projects in that case.
>
> Thanks
>
> /Joachim
>
>
> ________________________________________
> From: ptp-user-bounces@xxxxxxxxxxx [ptp-user-bounces@xxxxxxxxxxx] On
> Behalf Of Greg Watson [g.watson@xxxxxxxxxxxx]
> Sent: 14 January 2009 22:15
> To: PTP User list
> Subject: Re: [ptp-user] How do i start my remote builds ? - posted
> again
>
> Joachim,
>
> What service did you configure for the RDT Remote Build Service? I'm
> pretty sure that this needs to be an RSE SSH connection (not the
> dstore connection) to work with the remote builder.
>
> Regards,
>
> Greg
>
> On Jan 14, 2009, at 3:27 PM, Joachim Osbeck wrote:
>
>> Hello
>>
>> I hope that someone can give some ideas how to solve this
>>
>> Thanks for any help !
>>
>> /Joachim
>>
>> ----------------------------------------
>>
>> Thanks
>>
>> Created a new project, and disabled the auto-build, and I got one
>> step future ( it starts to invoke cmd vs the linux box) but now it
>> hangs, look at the attached picture.
>>
>> Shall I post to ptp-dev/user ?
>>
>> BR
>> Joachim Osbeck
>>
>>
>> ________________________________
>> From: Joachim Osbeck
>> Sent: 13 January 2009 19:56
>> To: recoskie@xxxxxxxxxx
>> Subject: RE: [cdt-dev] How do i start my remote builds ?
>>
>> Hello Chris
>>
>> Yes I think I have followed the instructions, if you have the time
>> please look at attached picutres to se if I perhaps have done
>> something wrong. I'm sorry to don't get this to work, will be a
>> killer application/solution when it will works :)
>>
>> BR,
>> Joachim Osbeck
>>
>>
>> ________________________________
>> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
>> Behalf Of Chris Recoskie [recoskie@xxxxxxxxxx]
>> Sent: 12 January 2009 23:08
>> To: CDT General developers list.
>> Subject: Re: [cdt-dev] How do i start my remote builds ?
>>
>>
>> Did you select the Remote Makefile Builder project type when you
>> created the project?
>>
>> ===========================
>> Chris Recoskie
>> Team Lead, IBM CDT and RDT
>> IBM Toronto
>> [cid:1__=0ABBFFAFDFEA1A578f9e8a93df938@xxxxxxxxxx]Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx
>>>
>>
>>
>>
>> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
>> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>>
>> 01/10/2009 05:53 PM
>> Please respond to
>> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>>
>>
>>
>>
>> To
>>
>> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>>
>> cc
>>
>>
>>
>> Subject
>>
>> [cdt-dev] How do i start my remote builds ?
>>
>>
>>
>> Hello
>>
>> So finally
>> - I have Linux RDT server up and running
>> - Successfully connection i Eclipse with my test remote project
>> ( hello world application)
>> - The application can be compile via a telnet/ssh consol on my Linux
>> box via a make file via g++
>>
>> But UI in Eclipse don't allow me to start a build ( execute the
>> 'make' via RDT server ?) or have I set up the project wrong ?
>>
>> Thanks for any help !
>>
>> /Joachim
>> ________________________________________
>> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
>> Behalf Of Joachim Osbeck [Joachim.Osbeck@xxxxxxxxxxxxxxxxx]
>> Sent: 10 January 2009 18:18
>> To: CDT General developers list.
>> Subject: RE: [cdt-dev] Can't install PTP 2.1
>>
>> Thanks Beth
>>
>> I did like you recommended and got it up and running :)
>>
>> Here are the steps that I did to get it this amazing tool to work
>> (perhpas this will help some one else )
>>
>> 1) Fresh Eclipse installation ( classic 3.4 ) http://www.eclipse.org/downloads/
>> --> Classic not the C/C++ ( don't know if I should used that
>> one ? )
>>
>> 2 ) Added the latest (?) CDT : cdt-master-5.0.2-I200901090802.zip
>>
>> 3 ) Added the latest ptp-master-2.1.1-I200812121901.zip
>>
>> 4 ) Follow the Quick installation from this page: http://wiki.eclipse.org/PTP/builds/2.1
>> Important step here is to only mark ( otherwise you get the version
>> conflicts, perhpas this was why my prev. installtion didn't work ?)
>>
>> * Select "Remote System Explorer End-User Runtime"
>> * Select "RSE User Actions"
>>
>> The only thing has happed now is the Eclipse is stucked in "Building
>> workspace...." that I need to cancel it each
>> time I need to save the a file on the linux box ?
>>
>> I don't know if I need to install the RTD server on my linux box to
>> run gcc/gdb ?
>>
>> Next challenges will be to get the build to fully work with
>> makefiles :)
>>
>> /Joachim
>>
>> ________________________________
>> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
>> Behalf Of Beth Tibbitts [tibbitts@xxxxxxxxxx]h
>> Sent: 10 January 2009 16:32
>> To: CDT General developers list.
>> Subject: Re: [cdt-dev] Can't install PTP 2.1
>>
>>
>> Joachim,
>> Sorry you are having trouble!
>> I would suggest starting from scratch, with a new Eclipse
>> installation.
>>
>> The "quick installation instructions" at http://wiki.eclipse.org/PTP/builds/2.1
>> I wrote long before the release. It *looks* correct to me
>> but it might be better to follow the more formal instructions in the
>> release notes at http://wiki.eclipse.org/PTP/release_notes/2.1
>> If you can tell if anything is wrong (or misleading) with the "quick
>> installation instructions" I'll fix them or else remove them and
>> point to the longer instructions in the release notes.
>>
>> Also you might want to try the latest build of PTP 2.1.1 at http://wiki.eclipse.org/PTP/builds/2.1.1
>> instead of 2.1.0
>> Be sure to use the latest CDT 5.0.2 either way (as I think you said
>> you did, but the log messages are confusing things, thus the clean
>> install might help).
>>
>> Let us know how you fare.
>>
>>
>> ...Beth
>>
>> Beth Tibbitts (859) 243-4981 (TL 545-4981)
>> High Productivity Tools / Parallel Tools http://eclipse.org/ptp
>> IBM T.J.Watson Research Center
>> Mailing Address: IBM Corp., 745 West New Circle Road, Lexington, KY
>> 40511
>>
>> [cid:1__=0ABBFFA9DFC7522B8f9e8a93df938@xxxxxxxxxx]Joachim Osbeck
>> ---01/10/2009 05:55:48 AM---Sorry I have some problems installning
>> the PTP (RDT)
>>
>>
>> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
>> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>>
>> 01/10/2009 05:49 AM
>> Please respond to
>> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>>
>>
>>
>>
>> To
>>
>> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>>
>> cc
>>
>>
>>
>> Subject
>>
>> [cdt-dev] Can't install PTP 2.1
>>
>>
>>
>> Sorry I have some problems installning the PTP (RDT)
>>
>> I tried to install the RTD via the PTP package but get error
>> messages ( se below )
>>
>> 1) Updated to CDT to 5.02.2008...
>>
>> 2) Used the the latest nightly PTP build ( ptp-master-2.1.0-
>> I200810301952.zip)
>> http://wiki.eclipse.org/PTP/builds/2.1http://wiki.eclipse.org/index.php?title=Parallel_Tools_Platform
>>
>> BR,
>>
>> Joachim Osbeck
>>
>> ________________________________
>> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
>> Behalf Of Chris Recoskie [recoskie@xxxxxxxxxx]
>> Sent: 09 January 2009 14:48
>> To: CDT General developers list.; ptp-dev@xxxxxxxxxxx
>> Subject: Re: [cdt-dev] Remote Complie and debug WinXp -> Linux ->
>> Embedded Linux Device
>>
>>
>> The RDT plugins from the PTP project will let you do remote builds.
>> Be forewarned you'll need the latest 2.1.1 nightly build with the
>> latest CDT 5.0.2 nightly build as there was an issue with error
>> parsing not working that has been fixed recently. Otherwise, your
>> errors and warnings won't show up properly in the Problems View.
>>
>> For remote debugging with GDB, you can either use gdbserver directly
>> (run the debug server on your remote machine, and debug it with a
>> local GDB), or use the Remote C/C++ Application launch configuration
>> provided by RSE (which basically automates launching gdbserver for
>> you).
>>
>> ===========================
>> Chris Recoskie
>> Team Lead, IBM CDT and RDT
>> IBM Toronto
>> [cid:1__=0ABBFFAADFD8F84D8f9e8a93df938@xxxxxxxxxx]Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx
>>>
>>
>>
>>
>> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
>> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>>
>> 01/09/2009 07:57 AM
>> Please respond to
>> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>>
>>
>>
>>
>> To
>>
>> "cdt-dev@xxxxxxxxxxx" <cdt-dev@xxxxxxxxxxx>
>>
>> cc
>>
>>
>>
>> Subject
>>
>> [cdt-dev] Remote Complie and debug WinXp -> Linux -> Embedded Linux
>> Device
>>
>>
>>
>> Hello
>>
>> I would like to use Eclipse cdt for my embedded Linux project and
>> need to do my development on a WinXP.
>> I have a linux box and my embedded device connected to the LAN. My
>> linux box has the usual setup of gcc/g++ and cross compilers. I have
>> tried to use the RSE which works nice for showing my folder at linux
>> but not found an way for starting gcc/g++ builds.
>>
>> - Is there a way to start gcc/g++ builds at my linux box via the
>> WinXp-Eclipse ?
>> - Is there a way to start debug sessions (gdb) on my embedded linux
>> device via the WinXp-Eclipse ?
>>
>> Thanks for any help !
>>
>> /Joachim
>> _______________________________________________
>> cdt-dev mailing list
>> cdt-dev@xxxxxxxxxxx
>> https://dev.eclipse.org/mailman/listinfo/cdt-dev
>> _______________________________________________
>> cdt-dev mailing list
>> cdt-dev@xxxxxxxxxxx
>> https://dev.eclipse.org/mailman/listinfo/cdt-dev
>> _______________________________________________
>> cdt-dev mailing list
>> cdt-dev@xxxxxxxxxxx
>> https://dev.eclipse.org/mailman/listinfo/cdt-dev
>>
>> <
>> rmt_cdt_setup_pictures
>> .rar><rmt_cdt_8.jpg>_______________________________________________
>> ptp-user mailing list
>> ptp-user@xxxxxxxxxxx
>> https://dev.eclipse.org/mailman/listinfo/ptp-user
>
> _______________________________________________
> ptp-user mailing list
> ptp-user@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/ptp-user
> _______________________________________________
> ptp-user mailing list
> ptp-user@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
