RE: [ptp-user] How do i start my remote builds ? - posted again

[Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>]

Yes it's a RSE SSH connection  - do I need the rdt server (at Linux box) to execute gcc/g++ ?

Greg - does it work for you ? Please descibe your installation/setup/projects in that case.

Thanks

/Joachim


________________________________________
From: ptp-user-bounces@xxxxxxxxxxx [ptp-user-bounces@xxxxxxxxxxx] On Behalf Of Greg Watson [g.watson@xxxxxxxxxxxx]
Sent: 14 January 2009 22:15
To: PTP User list
Subject: Re: [ptp-user] How do i start my remote builds ? - posted again

Joachim,

What service did you configure for the RDT Remote Build Service? I'm
pretty sure that this needs to be an RSE SSH connection (not the
dstore connection) to work with the remote builder.

Regards,

Greg

On Jan 14, 2009, at 3:27 PM, Joachim Osbeck wrote:

> Hello
>
> I hope that someone can give some ideas how to solve this
>
> Thanks for any help !
>
> /Joachim
>
> ----------------------------------------
>
> Thanks
>
> Created a new project, and disabled the auto-build, and I got one
> step future ( it starts to invoke cmd vs the linux box) but now it
> hangs, look at the attached picture.
>
> Shall I post to ptp-dev/user ?
>
> BR
> Joachim Osbeck
>
>
> ________________________________
> From: Joachim Osbeck
> Sent: 13 January 2009 19:56
> To: recoskie@xxxxxxxxxx
> Subject: RE: [cdt-dev] How do i start my remote builds ?
>
> Hello Chris
>
> Yes I think I have followed the instructions, if you have the time
> please look at attached picutres to se if I perhaps have done
> something wrong. I'm sorry to don't get this to work, will be a
> killer application/solution when it will works :)
>
> BR,
> Joachim Osbeck
>
>
> ________________________________
> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
> Behalf Of Chris Recoskie [recoskie@xxxxxxxxxx]
> Sent: 12 January 2009 23:08
> To: CDT General developers list.
> Subject: Re: [cdt-dev] How do i start my remote builds ?
>
>
> Did you select the Remote Makefile Builder project type when you
> created the project?
>
> ===========================
> Chris Recoskie
> Team Lead, IBM CDT and RDT
> IBM Toronto
> [cid:1__=0ABBFFAFDFEA1A578f9e8a93df938@xxxxxxxxxx]Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx
> >
>
>
>
> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>
> 01/10/2009 05:53 PM
> Please respond to
> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>
>
>
>
> To
>
> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>
> cc
>
>
>
> Subject
>
> [cdt-dev] How do i start my remote builds ?
>
>
>
> Hello
>
> So finally
> - I have Linux RDT server up and running
> - Successfully connection i Eclipse with my test remote project
> ( hello world application)
> - The application can be compile via a telnet/ssh consol on my Linux
> box via a make file via g++
>
> But UI in Eclipse don't allow me to start a build ( execute the
> 'make' via RDT server ?) or have I set up the project wrong ?
>
> Thanks for any help !
>
> /Joachim
> ________________________________________
> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
> Behalf Of Joachim Osbeck [Joachim.Osbeck@xxxxxxxxxxxxxxxxx]
> Sent: 10 January 2009 18:18
> To: CDT General developers list.
> Subject: RE: [cdt-dev] Can't install PTP 2.1
>
> Thanks Beth
>
> I did like you recommended and got it up and running :)
>
> Here are the steps that I did to get it this amazing tool to work
> (perhpas this will help some one else )
>
> 1)  Fresh Eclipse installation ( classic 3.4  ) http://www.eclipse.org/downloads/
>  --> Classic  not the C/C++  ( don't know if I should used that
> one ? )
>
> 2 )  Added the latest (?) CDT : cdt-master-5.0.2-I200901090802.zip
>
> 3 ) Added the latest ptp-master-2.1.1-I200812121901.zip
>
> 4 ) Follow the Quick installation from this page: http://wiki.eclipse.org/PTP/builds/2.1
> Important step here is to only mark  ( otherwise you get the version
> conflicts, perhpas this was why my prev. installtion didn't work ?)
>
> *   Select "Remote System Explorer End-User Runtime"
> *   Select "RSE User Actions"
>
> The only thing has happed now is the Eclipse is stucked in "Building
> workspace...."  that I need to cancel it each
> time I need to save the a file on the linux box ?
>
> I don't know if I need to install the RTD server on my linux box to
> run gcc/gdb ?
>
> Next challenges will  be to get the build to fully work with
> makefiles :)
>
> /Joachim
>
> ________________________________
> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
> Behalf Of Beth Tibbitts [tibbitts@xxxxxxxxxx]h
> Sent: 10 January 2009 16:32
> To: CDT General developers list.
> Subject: Re: [cdt-dev] Can't install PTP 2.1
>
>
> Joachim,
> Sorry you are having trouble!
> I would suggest starting from scratch, with a new Eclipse
> installation.
>
> The "quick installation instructions" at http://wiki.eclipse.org/PTP/builds/2.1
>  I wrote long before the release. It *looks* correct to me
> but it might be better to follow the more formal instructions in the
> release notes at http://wiki.eclipse.org/PTP/release_notes/2.1
> If you can tell if anything is wrong (or misleading) with the "quick
> installation instructions" I'll fix them or else remove them and
> point to the longer instructions in the release notes.
>
> Also you might want to try the latest build of PTP 2.1.1 at http://wiki.eclipse.org/PTP/builds/2.1.1
>  instead of 2.1.0
> Be sure to use the latest CDT 5.0.2 either way (as I think you said
> you did, but the log messages are confusing things, thus the clean
> install might help).
>
> Let us know how you fare.
>
>
> ...Beth
>
> Beth Tibbitts (859) 243-4981 (TL 545-4981)
> High Productivity Tools / Parallel Tools http://eclipse.org/ptp
> IBM T.J.Watson Research Center
> Mailing Address: IBM Corp., 745 West New Circle Road, Lexington, KY
> 40511
>
> [cid:1__=0ABBFFA9DFC7522B8f9e8a93df938@xxxxxxxxxx]Joachim Osbeck
> ---01/10/2009 05:55:48 AM---Sorry I have some problems installning
> the PTP (RDT)
>
>
> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>
> 01/10/2009 05:49 AM
> Please respond to
> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>
>
>
>
> To
>
> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>
> cc
>
>
>
> Subject
>
> [cdt-dev] Can't install PTP 2.1
>
>
>
> Sorry I have some problems installning the PTP (RDT)
>
> I tried to install the RTD via the PTP package  but get error
> messages ( se below )
>
> 1) Updated to CDT to 5.02.2008...
>
> 2) Used the the latest nightly PTP build ( ptp-master-2.1.0-
> I200810301952.zip)
> http://wiki.eclipse.org/PTP/builds/2.1http://wiki.eclipse.org/index.php?title=Parallel_Tools_Platform
>
> BR,
>
> Joachim Osbeck
>
> ________________________________
> From: cdt-dev-bounces@xxxxxxxxxxx [cdt-dev-bounces@xxxxxxxxxxx] On
> Behalf Of Chris Recoskie [recoskie@xxxxxxxxxx]
> Sent: 09 January 2009 14:48
> To: CDT General developers list.; ptp-dev@xxxxxxxxxxx
> Subject: Re: [cdt-dev] Remote Complie and debug WinXp -> Linux ->
> Embedded Linux Device
>
>
> The RDT plugins from the PTP project will let you do remote builds.
> Be forewarned you'll need the latest 2.1.1 nightly build with the
> latest CDT 5.0.2 nightly build as there was an issue with error
> parsing not working that has been fixed recently. Otherwise, your
> errors and warnings won't show up properly in the Problems View.
>
> For remote debugging with GDB, you can either use gdbserver directly
> (run the debug server on your remote machine, and debug it with a
> local GDB), or use the Remote C/C++ Application launch configuration
> provided by RSE (which basically automates launching gdbserver for
> you).
>
> ===========================
> Chris Recoskie
> Team Lead, IBM CDT and RDT
> IBM Toronto
> [cid:1__=0ABBFFAADFD8F84D8f9e8a93df938@xxxxxxxxxx]Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx
> >
>
>
>
> Joachim Osbeck <Joachim.Osbeck@xxxxxxxxxxxxxxxxx>
> Sent by: cdt-dev-bounces@xxxxxxxxxxx
>
> 01/09/2009 07:57 AM
> Please respond to
> "CDT General developers list." <cdt-dev@xxxxxxxxxxx>
>
>
>
>
> To
>
> "cdt-dev@xxxxxxxxxxx" <cdt-dev@xxxxxxxxxxx>
>
> cc
>
>
>
> Subject
>
> [cdt-dev] Remote Complie and debug WinXp -> Linux -> Embedded Linux
> Device
>
>
>
> Hello
>
> I would like to use Eclipse cdt for my embedded Linux project and
> need to do my development on a WinXP.
> I have a linux box and my embedded device connected to the LAN. My
> linux box has the usual setup of gcc/g++ and cross compilers. I have
> tried to use the RSE which works nice for showing my folder at linux
> but not found an way for starting gcc/g++ builds.
>
> - Is there a way to start gcc/g++ builds at my linux box via the
> WinXp-Eclipse ?
> - Is there a way to start debug sessions (gdb) on my embedded linux
> device via the WinXp-Eclipse ?
>
> Thanks for any help !
>
> /Joachim
> _______________________________________________
> cdt-dev mailing list
> cdt-dev@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/cdt-dev
> _______________________________________________
> cdt-dev mailing list
> cdt-dev@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/cdt-dev
> _______________________________________________
> cdt-dev mailing list
> cdt-dev@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/cdt-dev
>
> <
> rmt_cdt_setup_pictures
> .rar><rmt_cdt_8.jpg>_______________________________________________
> ptp-user mailing list
> ptp-user@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/ptp-user

_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user