Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
[cdt-debug-dev] CDT Debug issue
Hi ,

   I installed setup for ARM hardware using YAGARTO and Eclipse.

I have interface between eclips and ARM as
  PC Eclips -> CDT debug -> BDI 3000 -> ARM Board

when I debug it I got the error as
No symbol "new" in current context.

Has anyone of you came across this error earlier.

 
For your reference attached the log of console window here. I am not gettting where I am going wrong can you help me to solve the issue with the ARM hardware debug.
 
Thanks a lot .. !!
Avinash
 
 
--------------------------------------------------------------------------------------

83-gdb-set confirm off

83^done

(gdb)

84-gdb-set width 0

84^done

(gdb)

85-gdb-set height 0

85^done

(gdb)

86-interpreter-exec console echo

86^done

(gdb)

87-gdb-show prompt

87^done,value="(gdb) "

(gdb)

88-gdb-set new-console on

No symbol "new" in current context.

&"No symbol \"new\" in current context.\n"

88^error,msg="No symbol \"new\" in current context."

(gdb)

89 target remote 192.168.0.24:23

target remote 192.168.0.24:23

&"target remote 192.168.0.24:23\n"

&"192.168.0.24:23: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.\n"

192.168.0.24:23: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

89^error,msg="192.168.0.24:23: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."

(gdb)

90 monitor reset run

&"monitor reset run\n"

monitor reset run

&"\"monitor\" command not supported by this target.\n"

"monitor" command not supported by this target.

90^error,msg="\"monitor\" command not supported by this target."

(gdb)

91 monitor delay 3000

&"monitor delay 3000\n"

&"\"monitor\" command not supported by this target.\n"

monitor delay 3000

"monitor" command not supported by this target.

91^error,msg="\"monitor\" command not supported by this target."

(gdb)

92 monitor halt

&"monitor halt\n"

&"\"monitor\" command not supported by this target.\n"

92^error,msg="\"monitor\" command not supported by this target."

(gdb)

93

monitor halt

"monitor" command not supported by this target.

&"\n"

93^done

(gdb)

94-environment-directory D:/yagarto_ARM_BDI/workspace/STR7Test D:/yagarto_ARM_BDI/workspace/STR7Test/.dep D:/yagarto_ARM_BDI/workspace/STR7Test/.settings D:/yagarto_ARM_BDI/workspace/STR7Test/inc D:/yagarto_ARM_BDI/workspace/STR7Test/prj D:/yagarto_ARM_BDI/workspace/STR7Test/src

94^done,source-path="D:/yagarto_ARM_BDI/workspace/STR7Test;D:/yagarto_ARM_BDI/workspace/STR7Test/.dep;D:/yagarto_ARM_BDI/workspace/STR7Test/.settings;D:/yagarto_ARM_BDI/workspace/STR7Test/inc;D:/yagarto_ARM_BDI/workspace/STR7Test/prj;D:/yagarto_ARM_BDI/workspace/STR7Test/src;$cdir;$cwd"

(gdb)

95 info threads

&"info threads\n"

&"No registers.\n"

95^error,msg="No registers."

(gdb)

96-data-list-register-names

96^done,register-names=["r0","r1","r2","r3","r4","r5","r6","r7","r8","r9","r10","r11","r12","sp","lr","pc","f0","f1","f2","f3","f4","f5","f6","f7","fps","cpsr","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","",""]

(gdb)

97

&"\n"

97^done

(gdb)

--------------------------------------------------------------------------------



 

Back to the top