Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [aperi-dev] Aperi Flash Demos 

I would suggest to split the step "3. Configure (pre-installed) CIMOM and
run discovery/probe on a storage frame (no subnet scan, no SLP)"
into two separate steps.

"Add/configure a CIMOM and discover devices from CIMOM"
"Probe discovered Storage/Tape device"

Because the steps are equal for storage and tape devices I think one demo
can handle both.



What about a step

"Enable logging and tracing for problem determination"?

When we end-users open bugs it is difficult to determine the root cause
without the log-files and right traces enabled.


Mit freundlichen Grüßen, best regards

Christoph Reichert


Storage Software Development, Eclipse Aperi Project
IBM Deutschland, Mainz, Germany
Phone: +49-6131/84-5962, Fax: -6099
mailto:Christoph.Reichert@xxxxxxxxxx

IBM Deutschland GmbH
Vorsitzender des Aufsichtsrats: Hans Ulrich Maerki
Geschäftsführung: Martin Jetter (Vorsitzender), Rudolf Bauer, Christian
Diedrich,
Christoph Grandpierre, Matthias Hartmann, Andreas Kerstan
Sitz der Gesellschaft: Stuttgart
Registergericht: Amtsgericht Stuttgart, HRB 14562
WEEE-Reg.-Nr. DE 99369940


                                                                       
             Hans Lin                                                  
             <linh@xxxxxxxxxx>                                         
             Sent by:                                                   To
             aperi-dev-bounces         Aperi Development               
             @eclipse.org              <aperi-dev@xxxxxxxxxxx>         
                                                                        cc
                                                                       
             29.03.2007 18:59                                      Subject
                                       Re: [aperi-dev] Aperi Flash Demos
                                                                       
             Please respond to                                         
             Aperi Development                                         
             <aperi-dev@eclips                                         
                  e.org>                                               
                                                                       
                                                                       




The step " 5 : Install fabric agent, discover and probe" is redundant, the
Aperi install will bring up fabric agent automatically.

I also like to see tape discovery/probe

It seems we can use the Configuration Utility feature of Aperi r0.3 to do
the demo.

Hans H. Lin, Tivoli SAN Software Development
IBM San Jose, California
Phone: 408-284-4917, Fax: 408-256-8507
email: linh@xxxxxxxxxx

(Embedded image moved to file: pic04573.gif)Inactive hide details for Dave
Wolfe/Portland/IBM@IBMUSDave Wolfe/Portland/IBM@IBMUS

                                                                       
                         Dave                                          
                         Wolfe/Portlan                                 
                         d/IBM@IBMUS                                   
                         Sent by:      (Embedded image moved to file:  
                         aperi-dev-bou pic08098.gif)                   
                         nces@eclipse.                                  To
                         org                              (Embedded image
                                                          moved to file:
                                                          pic13188.gif)
                         03/29/2007                       aperi-dev@eclips
                         07:48 AM                         e.org        
                                       (Embedded image moved to file:  
                                       pic20793.gif)                   
           Please respond to                                            cc
           Aperi Development                              (Embedded image
        <aperi-dev@xxxxxxxxxxx>                           moved to file:
                                                          pic12000.gif)
                                       (Embedded image moved to file:  
                                       pic01178.gif)                   
                                                                   Subject
                                                          (Embedded image
                                                          moved to file:
                                                          pic08841.gif)
                                                          [aperi-dev]  
                                                          Aperi Flash  
                                                          Demos        
                                                                       
                                                                       
                                       (Embedded image moved to file:  
                                       pic11862.gif)                   
                                                  (Embedded image moved to
                                                  file: pic22076.gif)  
                                                                       
                                                                       




So, if we were to produce a series of 5-7 minute flash demos on how to
install and use Aperi what would they be? Which ones first?
Here's my stab:
      1. Bare system to running GUI install on Linux
      2. Bare system to running GUI install on Windows
      3. Configure (pre-installed) CIMOM and run discovery/probe on a
      storage frame (no subnet scan, no SLP)
      1. Show in topology, and disk manager views
      4. Configure SNMP fabric switch and run discovery/probe
      1. Show in topology, and fabric manager views
      5. Install fabric agent, discover and probe
      1. Show in topology, and fabric manager views
      6. Configure/Discover and probe a NAS device
      1. Show in topology and asset report views
      7. Create volumes, assign ports to hosts on a storage frame
      8. Create zones, assign hosts ports
      9. View storage capacity reports (classic and/or BIRT?)
      10. Customize and upload report via V0.3 BIRT report manager

Others? Different order? Refinements?

Dave Wolfe/Portland/IBM (dwolfe@xxxxxxxxxx) TL: 775-3376 Office:
503-578-3376 Personal: 503-329-3960


UI Technical Lead, Aperi Open Source Storage Management
http://www.eclipse.org/aperi


"A good composer does not imitate; he steals." - Igor Stravinsky


_______________________________________________
aperi-dev mailing list
aperi-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/aperi-dev(Embedded image moved to
file: pic21422.gif)_______________________________________________
aperi-dev mailing list
aperi-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/aperi-dev

Attachment: pic04573.gif
Description: GIF image

Attachment: pic08098.gif
Description: GIF image

Attachment: pic13188.gif
Description: GIF image

Attachment: pic20793.gif
Description: GIF image

Attachment: pic12000.gif
Description: GIF image

Attachment: pic01178.gif
Description: GIF image

Attachment: pic08841.gif
Description: GIF image

Attachment: pic11862.gif
Description: GIF image

Attachment: pic22076.gif
Description: GIF image

Attachment: pic21422.gif
Description: GIF image

Back to the top