Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [virgo-dev] Re: snaps checked in

I would like to follow Florian's example.

Attached are a set of patches to get Snaps building against 2.1.0.M02-incubation of virgo and 1.1.0.M02-incubation of gemini-web.

I got it to the point that simple-host + spring-snap get deployed and bound.  From my experience with Slices - there are still 2/3 issues that need to be fixed before it is usable.  I will look into creating patches for those once this set is settled. 

To test:

apply patches.
cd build-snap
ant clean clean-integration test package
cp target/package-expanded/snaps-1.0.0.BUILD-${localbuildtime}/repository/usr/* $virgo_home/repository/usr
modify $virgo_home/config/org.eclipse.virgo.kernel.userregion.properties to add snaps to the list of initialArtifacts (not sure if this is necessary, maybe dropping a plan in pickup is enough)
Example:
initialArtifacts=repository:plan/org.eclipse.virgo.kernel.userregion.springdm, repository:plan/org.eclipse.virgo.web, repository:plan/org.eclipse.virgo.snaps

Start webserver.

cp $snaps/org.eclipse.virgo.snaps.test/src/test/resources/simple-host.war  to $virgo-home/pickup/
Test:
http://localhost:8080/simple-host

cp $snaps/org.eclipse.virgo.snaps.test/src/test/resources/spring-snap.jarr  to $virgo-home/pickup/
Test:
http://localhost:8080/simple-host/spring/s/withViewName
http://localhost:8080/simple-host/spring/s/write


Note on patches:
0005 and 0006 should have been single - but I forgot to git add . before committing
0001 patch is basically application of everything that Florian attached to this email thread.

I also bumped version of virgo-build to align with other virgo components (took version from virgo.web one - hope it is right).

Let me know if I should create a Bugzilla issue to track this.

Regards,

Dmitry


On Fri, Jul 9, 2010 at 11:32 AM, Florian Waibel <fwaibel@xxxxxxxxxxxxxxxxx> wrote:
Hi,

this time i tried a little harder.
But didn't get past a Tests failed (crashed) in the snaps.test project.
I guess i missed something essential.

In case someone else is trying to migrate snaps i added the updated virgoise.sh.

I'll investigate the problem next week. If someone else could have a closer look, too that would be a great
timesaver i guess...

Thanks,
 florian



On Jul 7, 2010, at 3:43 PM, Glyn Normington wrote:

> Hi Florian
>
> Thanks very much for spotting that "slice" which slipped through the net! I've fixed that ([1] with an acknowledgement to yourself) and another that showed up via:
>
> ls -lR | grep slice
>
> The invitation to get the slices code working on top of Virgo instead of dm Server is still open. :-)
>
> Glyn
> [1] http://git.eclipse.org/c/virgo/org.eclipse.virgo.snaps.git/commit/?id=b3494fc78bf727f45c55d4e25f8de335918b6490
> On 7 Jul 2010, at 13:05, Florian Waibel wrote:
>
>> Hi,
>>
>> i followed your invitation :)
>>
>> #!/usr/bin/env bash
>> dir=`dirname $0`
>> dir=`cd $dir;pwd`
>>
>> for f in $(find . -iname "*.java" -or -iname "*.aj" -or -iname "*.xml" -or -iname ".project" -or -iname "*.MF" -or -iname "*.mf" -or -iname ".prefs"  -or -iname ".classpath" -or -iname "build.versions" -or -iname "*.properties" -or -iname "*.bat" -or -iname "*.sh" -or -iname "*.conf" -or -iname "*.profile" -or -iname "*.config" -or -iname "*.plan" -or -iname "runner.bundles")
>> do
>>
>> sed -i -e 's/SLICES_IVY_CACHE/SNAPS_IVY_CACHE/g' $f
>> sed -i -e 's/SLICE_/SNAP_/g' $f
>> sed -i -e 's/SLICES_/SNAPS_/g' $f
>> sed -i -e 's/slice\.simple/snap\.simple/g' $f
>>
>> rm $f-e
>> done
>>
>> One "missed" refactoring in project test-apps/simple-snap:
>>
>> #mkdir -p test-apps/simple-snap/src/main/java/snap/simple
>> #mv test-apps/simple-snap/src/main/java/slice/simple/*java test-apps/simple-snap/src/main/java/snap/simple
>> #rmdir test-apps/simple-snap/src/main/slice/simple
>>
>> I don't know about the $dir/update-dependency.rb commands. So those lines are missing...
>>
>> Regards,
>> florian
>>
>> --
>> Florian Waibel
>> EclipseSource
>> Email: fwaibel@xxxxxxxxxxxxxxxxx
>> Tel: +49-721-66-47-33-0
>> Fax: +49-721-66-47-33-29
>> http://www.eclipsesource.com/
>> ========================= Legal Disclaimer =================================
>> According to Section 80 of the German Corporation Act
>> Innoopract Informationssysteme GmbH must indicate the following information:
>> Address: Stephanienstrasse 20, 76133 Karlsruhe Germany
>> General Manager: Jochen Krause
>> Registered Office: Commercial Register Mannheim HRB 107883
>> ============================================================================
>>
>> On Jul 7, 2010, at 9:53 AM, Glyn Normington wrote:
>>
>>> Oh, I should also have mentioned the slices->snaps migration notes:
>>>
>>> http://wiki.eclipse.org/Virgo/Community#Migrating_from_the_dm_Server_slices_prototype_to_the_Virgo_snaps_prototype
>>>
>>> Glyn
>>> On 6 Jul 2010, at 19:02, Glyn Normington wrote:
>>>
>>>> I've checked in snaps to Eclipse git. See [1] for the location.
>>>>
>>>> The only changes I've made compared to the slices prototype is to uniformly rename "slices" to "snaps" (including the singular and other capitalisations), to re-package the code to org.eclipse.virgo packages, and to get this building cleanly with Virgo build. It still has dm Server pre-reqs and needs "virgoising" (the virgoise.sh shell script in the web server repo provides a good starting point).
>>>>
>>>> If anyone would care to provide a patch to get this working with Virgo, please be my guest.
>>>>
>>>> Glyn
>>>>
>>>> [1] http://wiki.eclipse.org/Virgo/Source#Virgo_git_Repositories
>>>
>>> _______________________________________________
>>> virgo-dev mailing list
>>> virgo-dev@xxxxxxxxxxx
>>> https://dev.eclipse.org/mailman/listinfo/virgo-dev
>>
>


_______________________________________________
virgo-dev mailing list
virgo-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/virgo-dev


Attachment: 0001-commiting-changes-from-Florian-Waibel-patches-sent-t.patch
Description: Binary data

Attachment: 0002-Update-versions-of-dependencies-and-virgo-build-vers.patch
Description: Binary data

Attachment: 0003-update-virgo-build-to-the-same-version-as-virgo.web.patch
Description: Binary data

Attachment: 0004-align-version-of-virgo-build-with-other-virgo-compon.patch
Description: Binary data

Attachment: 0005-upgrade-snaps-to-use-2.1.0-integration-dependencies.patch
Description: Binary data

Attachment: 0006-upgrade-snaps-to-use-2.1.0-integration-dependencies.patch
Description: Binary data

Attachment: 0007-change-log-even-prefix-to-match-messages.patch
Description: Binary data


Back to the top