[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
[news.eclipse.tools.hyades] Re: Problems using Statistical Console
|
When you run the trace and you don't get back any data, can you try
right-clicking on the agent node (the top level node for the trace) and
selecting 'Refresh'.
cheers
Antony
"Rafael Espinha" <rafael@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:cp7p2q$kmg$1@xxxxxxxxxxxxxxxxxx
> I tryed the perfmon in two machines, one running windows XP and othe
running
> windows 2000, but the problem persist. I didn't check the 'Connect to
> remote registry' otpion in profile configuration.
>
> I followed the steps, but the results were the same. When I run
perfmon.exe
> it works fine...
>
> Below there are the messages printed in command prompt of
PerfmonAgent.exe:
>
>
> C:\hyades\bin>PerfmonAgent.exe
> Using Resource DLL "sysperf.dll", Communications DLL "rac.dll"
> Sending agent name from the collection DLL - PerfmonAgent
> PerfmonAgent received agentname of PerfmonAgent
> Setting the agent name is the transfer DLL to PerfmonAgent
> Loading RAC libraries
> Getting RAC functions
> Initializing RAC bindings
> Connecting to RAC - PerfmonAgent - #1102538019374
> Starting RAC listener
> Allocating message block
> RAC Command 00000050
> RAC Agent Controller available
> RAC Startup succesful
> Allocating buffer
> RAC Command 00000017
> RAC Agent Started Monitoring 0
> RAC Command 00000019
> Received a RA_SET_NAME_VALUE_PAIR event, type var_string, name
> PERFMON_REG_HOST,
> value null
> FOUND NULL STRING null
> RAC Command 00000019
> Received a RA_SET_NAME_VALUE_PAIR event, type var_int, name DC_WAITTIME,
> value 1
> 000
> RAC Command 00000019
> Received a RA_SET_NAME_VALUE_PAIR event, type updatetree, name , value
true
> Requested children of tree node
> Perfmon Datacollection:Collecting from host (null)
> Object Count is 49
> ADDING OBJECT .NET CLR Data
> ADDING OBJECT .NET CLR Networking
> ADDING OBJECT .NET CLR Memory
> ADDING OBJECT .NET CLR Interop
> ADDING OBJECT .NET CLR Exceptions
> ADDING OBJECT .NET CLR Loading
> ADDING OBJECT .NET CLR LocksAndThreads
> ADDING OBJECT .NET CLR Jit
> ADDING OBJECT .NET CLR Remoting
> ADDING OBJECT .NET CLR Security
> ADDING OBJECT ASP.NET
> ADDING OBJECT ASP.NET Applications
> ADDING OBJECT ASP.NET v1.1.4322
> ADDING OBJECT ASP.NET Apps v1.1.4322
> ADDING OBJECT Indexing Service Filter
> ADDING OBJECT Indexing Service
> ADDING OBJECT Http Indexing Service
> ADDING OBJECT Distributed Transaction Coordinator
> ADDING OBJECT LogicalDisk
> ADDING OBJECT PhysicalDisk
> ADDING OBJECT Server
> ADDING OBJECT Server Work Queues
> ADDING OBJECT Redirector
> ADDING OBJECT Browser
> ADDING OBJECT Cache
> ADDING OBJECT Processor
> ADDING OBJECT Memory
> ADDING OBJECT Objects
> ADDING OBJECT Paging File
> ADDING OBJECT System
> ADDING OBJECT Process
> ADDING OBJECT Thread
> ADDING OBJECT Job Object
> ADDING OBJECT Job Object Details
> ADDING OBJECT PSched Pipe
> ADDING OBJECT PSched Flow
> ADDING OBJECT RSVP Service
> ADDING OBJECT RSVP Interfaces
> ADDING OBJECT Print Queue
> ADDING OBJECT Telephony
> ADDING OBJECT NBT Connection
> ADDING OBJECT Network Interface
> ADDING OBJECT IP
> ADDING OBJECT ICMP
> ADDING OBJECT TCP
> ADDING OBJECT UDP
> ADDING OBJECT Terminal Services Session
> ADDING OBJECT Terminal Services
> ADDING OBJECT WMI Objects
> RAC Command 00000019
> Received a RA_SET_NAME_VALUE_PAIR event, type var_int, name DC_WAITTIME,
> value 1
> 000
>
> []'s
> Rafael Espinha
>
> "Antony Miguel" <antony.miguel@xxxxxxxxxxxxx> wrote in message
> news:cp6oli$9df$1@xxxxxxxxxxxxxxxxxx
> > The problem with the stop button not working is an existing bug that has
> > been around for a while (71980). It is currently in the process of
being
> > fixed by the AC team but as a workaround the Perfmon Agent dies when the
> > client detaches from it, so to kill the agent you've launched from the
> > launch configuration (Run->Profile...) you can use the Detach action
> > instead
> > of Terminate (this in turn means that the agent does not support
> > detach/attach). If you launch from StatCon then you can just
right-click
> > on
> > the agent node and select 'Stop Trace' - this should terminate the
agent.
> >
> > As for not gathering data, I'm not sure why it wouldn't be working. Can
> > you
> > tell me if you're monitoring a remote registry (is 'Connect to remote
> > registry' checked in the new trace dialog?) and what version of windows
> > you
> > are running?
> >
> > You could also try the following steps:
> >
> > 1. Open windows Task Manager (run taskmgr.exe) and kill any processes
> > called
> > PerfmonAgent.exe (the terminate bug means that sometimes there can be
old
> > agents hanging around if they aren't detached from properly or stopped
in
> > StatCon)
> > 2. Close the Agent Controller
> > 3. Open a copy of StatCon
> > 4. Run the Agent Controller on the local host
> > 5. Right-click on the 'Windows System Trace (Perfmon)' node under the
> > 'Statistical Data Collection' node and select 'New Trace'
> > 6. Click OK to monitor perfmon on the local host
> >
> > If this basic scenario doesn't work then can you try running
'perfmon.exe'
> > and monitoring CPU or something to make sure that your registry isn't
> > corrupted.
> >
> > thanks
> >
> > Antony
> >
> > "Rafael Espinha" <rafael@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:cp691e$p64$1@xxxxxxxxxxxxxxxxxx
> >> First of all, thanks for the answer Antony...
> >>
> >> When I start my trace there is no error dialogs neither registers in
> >> log
> >> view. In the configuration I use the dafaults, trying to trace my
> > localhost
> >> with the default agent.
> >>
> >> I have already ran the SetConfig.bat and, when I try to collect data,
> > the
> >> RAServer.exe and PerfmonAgent.exe are running. When I run the trace via
> > the
> >> profiling configuration(profile>Host-Windows) no data is shown. When I
> >> run
> >> it from a StatCon it shows only the frequency counters.
> >>
> >> Another problem I am having is that i can't stop the agent through
> >> Profiling Monitor View. I click the stop button, but it has no effect.
> >>
> >> Any ideas of what can be happening??
> >>
> >> []'s
> >> Rafael Espinha
> >>
> >> "Antony Miguel" <antony.miguel@xxxxxxxxxxxxx> wrote in message
> >> news:cp1pu3$75r$1@xxxxxxxxxxxxxxxxxx
> >> > Hi,
> >> >
> >> > This problem usually means that the agent isn't getting back any data
> > (the
> >> > frequency counters are special as they control the agent and are not
> > part
> >> > of
> >> > the monitored counters). Do you see any error dialogs or logged
errors
> > in
> >> > the Error Log view? Also, can you tell me what information you enter
> >> > to
> >> > the
> >> > 'New Trace' dialog when you start a new perfmon agent?
> >> >
> >> > Some checks to make are:
> >> >
> >> > 1. Check that you have run your Agent Controller SetConfig.bat
> >> > 2. Check that the Agent Controller is running on the agent controller
> > host
> >> > you enter into the New Trace dialog
> >> > 3. (Important) If you are using the remote registry facility, make
sure
> >> > that
> >> > the Agent Controller host has permissions to get remote counters from
> > the
> >> > remote registry host.
> >> >
> >> > Number 3 in this list is a very common cause. The way to make sure
you
> >> > have permissions is to map a drive from the Agent Controller host to
> >> > the
> >> > remote registry host.
> >> >
> >> > E.g.
> >> > If the connection information is:
> >> >
> >> > Connect to host: machine1
> >> > Connect to remote registry: machine2
> >> >
> >> > then machine1 must have permissions to access machine2's registry.
> > To
> >> > get these permissions set up you need to map a drive on machine1 to a
> > path
> >> > on machine2.
> >> >
> >> > Once you have a drive mapped, open windows perfmon (Start
button ->
> >> > Run -> 'perfmon.exe') and try to connect to machine2. If you can add
> > it's
> >> > counters OK then you should have permissions.
> >> >
> >> > I'll look into whether the documentation explains this and get it
> > updated
> >> > if
> >> > not.
> >> >
> >> > cheers
> >> >
> >> > Antony Miguel
> >> >
> >> > "Rafael Espinha" <rafael@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> > news:corm62$qe5$1@xxxxxxxxxxxxxxxxxx
> >> >> Hello,
> >> >>
> >> >> I'm using the Statistical Console and I tryed to use the model
> >> >> provided
> >> >> by
> >> >> Perfmon, running Widows Perfmon Trace. The problem is thai it only
> > shows
> >> > the
> >> >> frequency(period between data updates) counter. Is there some manner
> >> >> to
> >> >> enable the other counters??
> >> >>
> >> >> []'s
> >> >> Rafael Espinha
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>