news.eclipse.dsdp.tml http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/maillist.html NewsGroup: news.eclipse.dsdp.tml en-us Tue, 17 Feb 2009 13:30:02 GMT Tue, 17 Feb 2009 13:30:02 GMT http://blogs.law.harvard.edu/tech/rss MHonArc RSS 2.0 RCFile webmaster@eclipse.org (Webmaster) webmaster@eclipse.org (Webmaster) news.eclipse.dsdp.tml http://www.eclipse.org/eclipse.org-common/themes/Phoenix/images/eclipse_home_header.jpg http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/maillist.html [news.eclipse.dsdp.tml] Extension Point for New VNC Connections http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00034.html Hi, I have been working with tml VNC plug-in already for sometime and it looks better and better. Thank you! I would like to add a new requirement for the project. I don't know whether there is a specific place for requirements that's why I'm using this ma... Hi,
I have been working with tml VNC plug-in already for sometime and it looks better and better. Thank you!

I would like to add a new requirement for the project. I don't know whether there is a specific place for requirements that's why I'm using this mailing list.

Actually, my requirement can be split in two parts:

1. As a user of VNC client I would like it allow me to save connection details. I would expect it to work as Run../Debug.. buttons in Eclipse, but located on the view toolbar.

2. As a developer of an Eclipse plug-in which uses VNC client I want to add predefined VNC connections. I guess, an extension point would be a good solution for this. The extension mechanism should allow to perform following scenario:

1. check whether certain connection can be established. In this step I would check that devise is connected to PC.
2. prepare for connection. Here I could start vnc server on device. This step could return VNC connection details.
3. connection stopped. Notify plug-in that connection has been terminated.


Please, let me know how to proceed with this requirements. I can also implement them by myself and send you patches. Lets just agree that we are not spending time implementing same things in different places.

Best Regards,
Petr

]]> Tue, 17 Feb 2009 13:21:47 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00034.html bbccpp@xxxxxxx (Petr Baranov) [news.eclipse.dsdp.tml] Re: Call for participation: TM 3.1m5 test pass on 1-Feb-2009 http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00033.html Hi all,
Test downloads for TM 3.1m5 have been uploaded, the Wiki page has
been updated: http://wiki.eclipse.org/DSDP/TM/Testing/3.1m5

Latest news: The "GSoC Team Synchronize" integration didn't make
it into this test build, but will be added for M5.

Thanks in advance for your testing TM 3.1m5!

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm




Martin Oberhuber wrote: 
Dear wider TM / RSE Community,

as you're probably aware, the upcoming M5 build of the Eclipse Galileo Train projects is what's going to go on a USB key for EclipseCon. The Target Management / RSE team therefore invites all interested parties to do a test pass on the TM 3.1m5 candidate

  on Monday, Feb. 1 2009

Why should you join?
- If you use TM as a dependency for your offering, you may want to
  check that the stuff you need works in m5

What can you do?
- Just try out the stuff that you'd like to work fine, and file
  a bug if it doesn't. We'll provide a bug reporting template
  for you, so it's super fast and easy to participate.

How long will it take you?
- If you've just got 1 hour for downloading, installing and trying
  it out that's a very valuable input for us already. Of course
  you're free to report enhancement requests as well!

Any additional information like the test candidate to download,
bug reporting template, and other information will be on
http://wiki.eclipse.org/DSDP/TM/Testing/3.1m5

For any other questions, please contact us on the TM mailing list:
https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev

Thanks,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm


]]> Mon, 02 Feb 2009 02:37:59 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00033.html martin.oberhuber@xxxxxxx (Martin Oberhuber) [news.eclipse.dsdp.tml] Call for participation: TM 3.1m5 test pass on 1-Feb-2009 http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00032.html Dear wider TM / RSE Community, as you're probably aware, the upcoming M5 build of the Eclipse Galileo Train projects is what's going to go on a USB key for EclipseCon. The Target Management / RSE team therefore invites all interested parties to do a test p... Dear wider TM / RSE Community,
as you're probably aware, the upcoming M5 build of the Eclipse Galileo Train projects is what's going to go on a USB key for EclipseCon. The Target Management / RSE team therefore invites all interested parties to do a test pass on the TM 3.1m5 candidate

  on Monday, Feb. 1 2009

Why should you join?
- If you use TM as a dependency for your offering, you may want to
  check that the stuff you need works in m5

What can you do?
- Just try out the stuff that you'd like to work fine, and file
  a bug if it doesn't. We'll provide a bug reporting template
  for you, so it's super fast and easy to participate.

How long will it take you?
- If you've just got 1 hour for downloading, installing and trying
  it out that's a very valuable input for us already. Of course
  you're free to report enhancement requests as well!

Any additional information like the test candidate to download,
bug reporting template, and other information will be on
http://wiki.eclipse.org/DSDP/TM/Testing/3.1m5

For any other questions, please contact us on the TM mailing list:
https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev

Thanks,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm


]]> Mon, 26 Jan 2009 16:37:50 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00032.html martin.oberhuber@xxxxxxx (Martin Oberhuber) [news.eclipse.dsdp.tml] Re: VNC mouse clicks not working http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00031.html Hi Rennie, Thanks for your information. Really there is a bug related to this feature and we are working to fix it. We did a first tentative to fix it but we dont know why the server disconnect when the release event is received. There are some resources a... Hi Rennie, Thanks for your information. Really there is a bug related to this feature and we are working to fix it. We did a first tentative to fix it but we dont know why the server disconnect when the release event is received. There are some resources allocated to fix it. More details about this bug and track its implementation , please see in: https://bugs.eclipse.org/bugs/show_bug.cgi?id=247840 Thanks Fabio "Rennie allen" <rallen@xxxxxxxxxxx> wrote in message news:fdc8428a020ddcf023172a091337b23d$1@xxxxxxxxxxxxxxxxxx > Fabio Fantato wrote: > > >> Hello Rennie, > > Hi Fabio! > >> Do you have more details about this issue? > > Well, I am not sure what else I can add. Essentially, I can attach to the > VNC server fine, and I can see the pointer move in response to movements > within the view, but a click (potentially the release is the problem) does > not produce any results. I can use a standalone tightVNC client from the > same Windows host to connect to the same server and that works, so I know > it is not a server config problem. > > The setup is Ganymede + the VNC components identified, with a target on > Puppy Linux 4.1. I don't believe there is any .log output. > >> This is a valid configurations but I need more information to know >> exactly what is the problem? > > I am happy to help diagnose. Perhaps you have a debug plug-in that will > indicate whether it gets to the part of the code that actually sends the > click/release event? > > I am reasonably familiar with eclipse plug-in development, but at this > time I am not quite setup to debug this on my own. > > Thanks, > > Rennie > > ]]> Tue, 11 Nov 2008 15:58:42 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00031.html wfr004@xxxxxxx (Fabio Fantato) [news.eclipse.dsdp.tml] Re: VNC mouse clicks not working http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00030.html Hi Fabio! Well, I am not sure what else I can add. Essentially, I can attach to the VNC server fine, and I can see the pointer move in response to movements within the view, but a click (potentially the release is the problem) does not produce any results... Fabio Fantato wrote:

Hello Rennie, 

Hi Fabio!

Do you have more details about this issue?

Well, I am not sure what else I can add. Essentially, I can attach to the VNC server fine, and I can see the pointer move in response to movements within the view, but a click (potentially the release is the problem) does not produce any results. I can use a standalone tightVNC client from the same Windows host to connect to the same server and that works, so I know it is not a server config problem.

The setup is Ganymede + the VNC components identified, with a target on Puppy Linux 4.1. I don't believe there is any .log output.

This is a valid configurations but I need more information to know exactly what is the problem?

I am happy to help diagnose. Perhaps you have a debug plug-in that will indicate whether it gets to the part of the code that actually sends the click/release event?

I am reasonably familiar with eclipse plug-in development, but at this time I am not quite setup to debug this on my own.

Thanks,

Rennie



]]> Mon, 10 Nov 2008 17:15:42 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00030.html rallen@xxxxxxx (Rennie allen) [news.eclipse.dsdp.tml] Re: VNC mouse clicks not working http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00029.html Hello Rennie, Do you have more details about this issue? This is a valid configurations but I need more information to know exactly what is the problem? Thanks Fabio &quot;Rennie allen&quot; &lt;rallen@xxxxxxxxxxx&gt; wrote in message news:c83d341c5c371a45786eac3ddae749a... Hello Rennie, Do you have more details about this issue? This is a valid configurations but I need more information to know exactly what is the problem? Thanks Fabio "Rennie allen" <rallen@xxxxxxxxxxx> wrote in message news:c83d341c5c371a45786eac3ddae749a0$1@xxxxxxxxxxxxxxxxxx > Keystrokes work, pointer events are sent, but release events are not sent. > I am using: > > Viewer runtime 0.4.0 > Viewer service 0.2.0 > Views 0.4.0 > > Is this a valid config? > > Thanks! > ]]> Wed, 05 Nov 2008 19:39:16 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00029.html wfr004@xxxxxxx (Fabio Fantato) [news.eclipse.dsdp.tml] Re: Running the demo with release 0.1 http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00028.html Hi Dimitri, Our examples should be running in Eclipse 3.4. The documentation was not updated. We are verifying this tutorial to be sure that it is still working for the current version. Please tell us if you could use the examples and if you could create a... Hi Dimitri, Our examples should be running in Eclipse 3.4. The documentation was not updated. We are verifying this tutorial to be sure that it is still working for the current version. Please tell us if you could use the examples and if you could create a demo environment that works. Sorry if I can not answer before but I was in vacation in this period. Thanks Fabio "YANCULOVICI " <dimitri.yanculovici@xxxxxxxxxxxxxxxxxx> wrote in message news:903c11eb175bb8e698c72da1eff82ff3$1@xxxxxxxxxxxxxxxxxx > Hello, > > Interrested by the problematic addressed by Tml project I've installed the > latest release (0.1) in my eclipse 3.4... > > I know want to try the demo described in the > http://wiki.eclipse.org/DSDP/TML/How_to_configure_TmL_demo page. > > I suppose that the demo described in this page does not correspond to the > latest release: - it run on eclipse 3.3 and, > - it describes how to configure qemu and qemureact examples which are > already included in the latest release > > So, is there a documentation about the 3rd point of Running the Tml demo > section: "Open the TmL Perspective and enjoy it" > > Under the TmL perspective I've tried to create new instances of QEmuARM > and QEmuReact. > > What do the 3 fields (port, host, display) correspond to ? And more > generaly how I get quikly a demonstrative environment ? > > > Thank you for any help. > ]]> Wed, 05 Nov 2008 19:36:30 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00028.html wfr004@xxxxxxx (Fabio Fantato) [news.eclipse.dsdp.tml] VNC mouse clicks not working http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00027.html Keystrokes work, pointer events are sent, but release events are not sent. I am using: Viewer runtime 0.4.0 Viewer service 0.2.0 Views 0.4.0 Is this a valid config? Thanks! Keystrokes work, pointer events are sent, but release events are not sent. I am using:

Viewer runtime 0.4.0
Viewer service 0.2.0
Views          0.4.0

Is this a valid config?

Thanks!


]]> Sun, 02 Nov 2008 01:12:42 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00027.html rallen@xxxxxxx (Rennie allen) [news.eclipse.dsdp.tml] Running the demo with release 0.1 http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00026.html Hello, Interrested by the problematic addressed by Tml project I've installed the latest release (0.1) in my eclipse 3.4... I know want to try the demo described in the http://wiki.eclipse.org/DSDP/TML/How_to_configure_TmL_demo page. I suppose that the dem... Hello,
Interrested by the problematic addressed by Tml project I've installed the latest release (0.1) in my eclipse 3.4...

I know want to try the demo described in the http://wiki.eclipse.org/DSDP/TML/How_to_configure_TmL_demo page.

I suppose that the demo described in this page does not correspond to the latest release: - it run on eclipse 3.3 and,
- it describes how to configure qemu and qemureact examples which are already included in the latest release

So, is there a documentation about the 3rd point of Running the Tml demo section: "Open the TmL Perspective and enjoy it"

Under the TmL perspective I've tried to create new instances of QEmuARM and QEmuReact.

What do the 3 fields (port, host, display) correspond to ? And more generaly how I get quikly a demonstrative environment ?


Thank you for any help.


]]> Tue, 14 Oct 2008 18:48:40 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00026.html dimitri.yanculovici@xxxxxxx (YANCULOVICI ) [news.eclipse.dsdp.tml] DSDP TmL 0.1 Release Review http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00025.html The 0.1 Release Review for DSDP TmL has been declared successful by the EMO based on the review docuware and community feedback. There was no request for a Review Call. Thanks. The 0.1 Release Review for DSDP TmL has been declared successful by the EMO based on the review docuware and community feedback. There was no request for a Review Call. Thanks.


]]> Wed, 08 Oct 2008 18:37:50 GMT http://dev.eclipse.org/mhonarc/newsLists/news.eclipse.dsdp.tml/msg00025.html anne.jacko@xxxxxxx (Anne Jacko)