Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [wtp-releng] Smoke Test Request for Post WTP 2.0.2 patch for222531

Hmm...It still isn't showing up for me.  Perhaps there is something else going wrong.  Can you confirm Helen?


David M Williams wrote:

Ok Neal ... I didn't believe it, but if Helen says it's so, then it must be true :)
And, I've just been under the wrong impression the past two years :(
Please try again, I've created a new patch feature with the service field incremented.
I've also updated our instructions at
http://wiki.eclipse.org/WTP_Patches_for_Release_2.0.2

Thanks to you both.



From: Helen Zhang <hjzhang@xxxxxxxxxx>
To: Webtools releng discussion list <wtp-releng@xxxxxxxxxxx>
Cc: Webtools releng discussion list <wtp-releng@xxxxxxxxxxx>, wtp-releng-bounces@xxxxxxxxxxx
Date: 03/26/2008 05:59 PM
Subject: Re: [wtp-releng] Smoke Test Request for Post WTP 2.0.2 patch for222531






Thanks Neil!  Yepyep, looks like it only happens when the previous patch is installed, so looks like not only the qualifier # but the service # may need to be incremented as well.

We'll update if this is the case and if a new patch is to be rebuilt.  Good catch!


Regards,

Helen Zhang
Release Engineer, Project Manager
Rational Architecture Management Project Management Office
Eclipse Webtools Platform (WTP)

IBM Toronto Software Lab | 8200 Warden Ave. | Markham | L6G 1C7
Email: hjzhang@xxxxxxxxxx | Phone: 905-413-3443 | T/L: 969-3443


Neil Hauge <neil.hauge@xxxxxxxxxx>
Sent by: wtp-releng-bounces@xxxxxxxxxxx

03/26/2008 02:30 PM

Please respond to
Webtools releng discussion list <wtp-releng@xxxxxxxxxxx>

To
Webtools releng discussion list <wtp-releng@xxxxxxxxxxx>
cc

Subject
Re: [wtp-releng] Smoke Test Request for Post WTP 2.0.2 patch for222531









There have been a total of 4 patches released, with the fourth being a cumulative patch which includes 2 patches, which is why you see 3.  I on the other hand have installed the first 3 already.  Now I am trying to get the fourth. :  )

>From a clean Europa Winter install I was able to successfully apply the 3 existing patches, and everything is happy, including my smoke test.   But on my existing Winter install, I am still unable to pick up the new patch using the policy to direct to the test site.

I fear there may be a problem updating a previously patched component.

See below for example, note the dates on the patches:



Try the update:



Result:



Neil

Raev, Kaloyan wrote:

I don't understand something, Neil. Why are you looking for fourth patch, when they are actually three - altogether with the newest one that we are testing? At least I see three and I have installed only the needed one.

 

The patch that you have to install is
JST Web Core Patches 2.0.2.v200803241913-208i8s733I395D6BA7
 

Could it be the case that the patch is actually in front of you, but your mind does not see it? :-)


From: wtp-releng-bounces@xxxxxxxxxxx [mailto:wtp-releng-bounces@xxxxxxxxxxx] On Behalf Of Neil Hauge
Sent:
Wednesday, March 26, 2008 7:48 PM
To:
Webtools releng discussion list
Subject:
Re: [wtp-releng] Smoke Test Request for Post WTP 2.0.2 patch for222531


Thanks.  I'll keep trying then.  I'm not sure why the first 3 would show up, but not the fourth.  Perhaps I will find out.

Raev, Kaloyan wrote:

Following the instructions from Helen, I had no problem installing the patch on top of the jee-winter epp installation.




From: wtp-releng-bounces@xxxxxxxxxxx [mailto:wtp-releng-bounces@xxxxxxxxxxx] On Behalf Of Neil Hauge
Sent:
Wednesday, March 26, 2008 7:31 PM
To:
Webtools releng discussion list
Subject:
Re: [wtp-releng] Smoke Test Request for Post WTP 2.0.2 patch for222531


For some reason the new patch doesn't want to show up for me on the testUpdate site.  I have been successful in installing the 3 previous patches via New Remote Site and the policy.xml file, but the new JST Web Core patch won't show up for me for some reason.

I just wanted to make sure that I was the only one having this problem, and that others were able to pick up the new patch via the test update site.  Can someone confirm?

Neil

Helen Zhang wrote:


Please update the smoketest page by Wednesday noon.  Thank you!


Please first install 202, and then use the test update site to update and smoketest this patch build.
Note that when installing the JST Web Core Patches should be at version 2.0.2.v200803241913-208i8s733I395D6BA7 and verify that the description mentions bug222531 also.


Primarily, the JEE Team, Server Tools, and possibly Web Services should do full test to ensure there is no regressions. Other teams may not need to run full smoketest scenarios, but we want to make sure that everyone at least test it out to eliminate the chances of regression.  Thanks!


Smoketest Results

http://wiki.eclipse.org/WTP_Smoke_Test_Results_R20_0325008


This update is not yet available on the official site, copying the instructions from David to update from the test update site => /webtools/testUpdates


As recently documented in
http://wiki.eclipse.org/WTP_Patches_for_Release_2.0.2
to test the updates before making officially available in webtools/updates you can follow this procedure:

1. created a Policy file on your local file system, such as in C:\localPolicy\policy.xml
with contents such as following
<?xml version="1.0" encoding="UTF-8"?>
<update-policy>
<url-map pattern="org.eclipse.wst" url=""true" href="http://download.eclipse.org/webtools/testUpdates/site.xml">http://download.eclipse.org/webtools/testUpdates/site.xml"/>
<url-map pattern="org.eclipse.jst" url=""true" href="http://download.eclipse.org/webtools/testUpdates/site.xml">http://download.eclipse.org/webtools/testUpdates/site.xml"/>
<url-map pattern="org.eclipse.jpt" url=""true" href="http://download.eclipse.org/webtools/testUpdates/site.xml">http://download.eclipse.org/webtools/testUpdates/site.xml"/>
<url-map pattern="*" url=""/>
</update-policy>
2. in Preferences, Install/Update set the Policy XML field to

file:///C:/localPolicy/policy.xml
(and if checked, uncheck the "automatically select mirrors" while you are there).

Then, update as you originally tried, and under the covers, your requests to "webtools/updates" will be
redirected to "webtools/updates". (And, if presented with a list of mirrors, you should scroll down and
pick the home "download.eclipse.org" site, instead of a mirror).


You should select
http://download.eclipse.org/webtools/testUpdates/site.xml when the "Update Site Mirrors" panel comes up.


Regards,

Helen Zhang
Release Engineer, Project Manager
Rational Architecture Management Project Management Office
Eclipse Webtools Platform (WTP)

IBM Toronto Software Lab | 8200 Warden Ave. | Markham | L6G 1C7
Email:
hjzhang@xxxxxxxxxx | Phone: 905-413-3443 | T/L: 969-3443



_______________________________________________
wtp-releng mailing list

wtp-releng@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-releng
 



_______________________________________________
wtp-releng mailing list

wtp-releng@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-releng
 




_______________________________________________
wtp-releng mailing list

wtp-releng@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-releng
 
_______________________________________________
wtp-releng mailing list
wtp-releng@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-releng
_______________________________________________
wtp-releng mailing list
wtp-releng@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-releng


_______________________________________________ wtp-releng mailing list wtp-releng@xxxxxxxxxxx https://dev.eclipse.org/mailman/listinfo/wtp-releng


Back to the top