[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
Re: [m2e-users] How to tell m2e to update a particular folder (or at least: "target" folder) after <pluginExecution>?
|
And as I said earlier, blindly running maven build after each resource
change will result in poor performance and endless build loops. It does
not matter if this is done through m2e extension or implemented in m2e
core itself.
--
Regards,
Igor
On 12-07-11 5:00 PM, Markus Karg wrote:
Well, possibly easy for you, but as I said, I have no idea how Eclipse
plugin coding works… (and doubt that spending days into learning is
worth the effort as it is not a public solution then)
*Von:*m2e-users-bounces@xxxxxxxxxxx
[mailto:m2e-users-bounces@xxxxxxxxxxx] *Im Auftrag von *Matthew Piggott
*Gesendet:* Mittwoch, 11. Juli 2012 15:43
*An:* Maven Integration for Eclipse users mailing list
*Betreff:* Re: [m2e-users] How to tell m2e to update a particular folder
(or at least: "target" folder) after <pluginExecution>?
Its fairly easy to write a connector to do this for you.
On 11 July 2012 09:16, Markus Karg <karg@xxxxxxxxx
<mailto:karg@xxxxxxxxx>> wrote:
Well, in fact Pressing CTRL-S followed by F5 neither produces endless
builds nor needs any measurable time on my workstation. Actually it runs
in less than a second. So I really would love to see the possibility for
<refresh>target/generated-sources/java/xslt</refresh> or something like
that in a future release, so people like me can optionally enable this. :-)
-----Ursprüngliche Nachricht-----
Von: m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>
[mailto:m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>] Im Auftrag von Igor Fedorenko
Gesendet: Mittwoch, 11. Juli 2012 14:13
An: Maven Integration for Eclipse users mailing list
Betreff: Re: [m2e-users] How to tell m2e to update a particular folder
(or at least: "target" folder) after <pluginExecution>?
Ah, ok. This is Run As Maven launch configuration. No plans to remove
it, so no worries there. It is not possible to execute as part of Ctrl-S
however, and you almost certainly don't want to do that for performance
reasons and endless builds I mentioned.
--
Regards,
Igor
On 12-07-11 3:08 PM, Dave Hartnoll wrote:
> OK, attached as 'refresh.jpg'.
>
> Dave.
>
> -----Original Message-----
> From: m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>
> [mailto:m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>] On Behalf Of Igor Fedorenko
> Sent: 11 July 2012 12:53
> To: m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
> Subject: Re: [m2e-users] How to tell m2e to update a particular
folder (or at least: "target" folder) after <pluginExecution>?
>
> Can you post a screenshot of your builder configuration dialog?
>
> --
> Regards,
> Igor
>
> On 12-07-11 2:39 PM, Dave Hartnoll wrote:
>> It's present in my Eclipse 4.2 with latest everything (incl. m2e
1.1). Please don't remove it - I use it to get all the target folders
updated in the IDE after a full build.
>>
>> Dave.
>>
>> -----Original Message-----
>> From: m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>
>> [mailto:m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>] On Behalf Of Igor Fedorenko
>> Sent: 11 July 2012 12:04
>> To: m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
>> Subject: Re: [m2e-users] How to tell m2e to update a particular
folder (or at least: "target" folder) after <pluginExecution>?
>>
>> We've removed this from m2e 0.12 if I am not mistaken, but from 1.0
for sure.
>>
>> --
>> Regards,
>> Igor
>>
>> On 12-07-11 12:23 PM, Dave Hartnoll wrote:
>>> Hi Markus,
>>>
>>> I'm not sure if this will help, but if you are only concerned with
>>> not having to press F5 after Maven has run then you could set up a
>>> Run Configuration (Run->Run Configurations...) to process the Maven
build.
>>> The 'Maven Build' configuration type has a 'Refresh' tab where you
>>> can control what gets refreshed afterwards.
>>>
>>> Dave.
>>>
>>> *From:*m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>
>>> [mailto:m2e-users-bounces@xxxxxxxxxxx
<mailto:m2e-users-bounces@xxxxxxxxxxx>] *On Behalf Of *Markus Karg
>>> *Sent:* 09 July 2012 15:13
>>> *To:* m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
>>> *Subject:* [m2e-users] How to tell m2e to update a particular folder
>>> (or at least: "target" folder) after <pluginExecution>?
>>>
>>> Hello m2e Community!
>>>
>>> My pom.xml enables execution of the xml-maven-plugin (and enables
>>> generated-sources as a target folder using the build-helper-plugin):
>>>
>>> <configuration>
>>>
>>> <lifecycleMappingMetadata>
>>>
>>> <pluginExecutions>
>>>
>>> <pluginExecution>
>>>
>>> <pluginExecutionFilter>
>>>
>>> <groupId>org.codehaus.mojo</groupId>
>>>
>>> <artifactId>xml-maven-plugin</artifactId>
>>>
>>> <versionRange>[1.0,)</versionRange>
>>>
>>> <goals>
>>>
>>> <goal>transform</goal>
>>>
>>> </goals>
>>>
>>> </pluginExecutionFilter>
>>>
>>> <action>
>>>
>>> <execute/>
>>>
>>> </action>
>>>
>>> </pluginExecution>
>>>
>>> </pluginExecutions>
>>>
>>> </lifecycleMappingMetadata>
>>>
>>> </configuration>
>>>
>>> After pressing F5 I can see the generated outcome in Eclipse Indigo.
>>> Nice! J
>>>
>>> But I don't want to press F5! So how to tell m2e that after <execute
>>> /> of the plugin, it also shall <refresh /> the generated-sources
>>> folder in the IDE?
>>>
>>> Thanks!
>>>
>>> Markus
>>>
>>>
>>>
>>> _______________________________________________
>>> m2e-users mailing list
>>> m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
>>> https://dev.eclipse.org/mailman/listinfo/m2e-users
>>>
>>
>> _______________________________________________
>> m2e-users mailing list
>> m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
>> https://dev.eclipse.org/mailman/listinfo/m2e-users
>> _______________________________________________
>> m2e-users mailing list
>> m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
>> https://dev.eclipse.org/mailman/listinfo/m2e-users
>>
>
> _______________________________________________
> m2e-users mailing list
> m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
> https://dev.eclipse.org/mailman/listinfo/m2e-users
>
>
>
> _______________________________________________
> m2e-users mailing list
> m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
> https://dev.eclipse.org/mailman/listinfo/m2e-users
>
_______________________________________________
m2e-users mailing list
m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
https://dev.eclipse.org/mailman/listinfo/m2e-users
_______________________________________________
m2e-users mailing list
m2e-users@xxxxxxxxxxx <mailto:m2e-users@xxxxxxxxxxx>
https://dev.eclipse.org/mailman/listinfo/m2e-users
_______________________________________________
m2e-users mailing list
m2e-users@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/m2e-users
