[geclipse-user] AW: [geclipse-dev] FW: Accepted email confirmation for V

["Stuempert, Mathias IWR" <mathias.stuempert@xxxxxxxxxx>]

Hi Tran,

Sorry, can't test this right now since I currently do not have my certificate available. In any case I am CCing geclipse-user and hopefully the team can give you some hints on that.

One idea would be to have a look at the error view and tell us the details of the error.

Team, if you reply to Tran please CC him directly since I believe he is not a member of geclipse-user yet. Tran, maybe you change that by subscribing ;-)

Cheers, Mathias

-----Ursprüngliche Nachricht-----
Von: Tran Son [mailto:sontn.fz@xxxxxxxxx]
Gesendet: Di 13.01.2009 22:09
An: Stuempert, Mathias IWR
Betreff: Re: [geclipse-dev] FW: Accepted email confirmation for VO geclipsetutor
 
Hi mathias,
It seems to be working but the connection is not set up.
*Unable to activate token
Error while trying to query VOMS server
Connection reset

*Again i check the VOMS VO and find everything ok, i can see from
geclipsetutor VO but when i try to activate the token i got problem.
Thanks

On Tue, Jan 13, 2009 at 8:53 PM, Stuempert, Mathias IWR <
mathias.stuempert@xxxxxxxxxx> wrote:

> Hi Tran,
>
> You have to import the CA certificates. To do so go to the g-Eclipse
> preference's security page and choose import. Then select the European Grid
> Policy Management Authority EuGridPMA (this may be named a bit different but
> since I do not have a running g-Eclipse in front of me ... anyways this
> should be the preselected item). Then press Next. After the repository is
> queried for available certificates just "Select All" and press Finish. The
> certificates get imported and now you should be able to activate your VOMS
> proxy.
>
> Cheers, Mathias
>
>
> -----Original Message-----
> From: Tran Son [mailto:sontn.fz@xxxxxxxxx]
> Sent: Tue 1/13/2009 9:28 PM
> To: Stuempert, Mathias IWR
> Subject: Re: [geclipse-dev] FW: Accepted email confirmation for VO
> geclipsetutor
>
> Thank mathias,
> I am trying to active my token but it always returns error:
> Unable to activate token Error while trying to query VOMS server
> Authentication failed [Caused by: Failure unspecified at GSS-API level
> [Caused by: Unknown CA]].
>
> I got the personal certificate from GILDA website and I am successful
> accepted to be member of geclipsetutor VO.
>
> Thanks and regards.
>
>
> On Tue, Jan 13, 2009 at 8:23 PM, Stuempert, Mathias IWR <
> mathias.stuempert@xxxxxxxxxx> wrote:
>
> > Hi Tran,
> >
> > Good to hear you found your way through. Do not hesitate to ask again if
> > there are any further problems!
> >
> > Best regards,
> >
> > Mathias
> >
> >
> > -----Original Message-----
> > From: Tran Son [mailto:sontn.fz@xxxxxxxxx]
> > Sent: Tue 1/13/2009 8:06 PM
> > To: Stuempert, Mathias IWR
> > Subject: Re: [geclipse-dev] FW: Accepted email confirmation for VO
> > geclipsetutor
> >
> > Thank Mathias,
> > I was using the old version of G-Eclipse so it made me some confusion
> when
> > trying to connect to the VO. I have just download the new one. It is
> easier
> > to do such of thing :).
> >
> > Regards
> >
> > On Tue, Jan 13, 2009 at 8:43 AM, Stuempert, Mathias IWR <
> > mathias.stuempert@xxxxxxxxxx> wrote:
> >
> > > Dear Tran,
> > >
> > > Welcome to the geclipsetutor VO. Let me give you some input to your
> > > questions ...
> > >
> > > > I'm student of university of Reading. I am starting study Grid
> > computing
> > > and
> > > > i want to try using G-Eclipse to create Grid Project with
> geclipsetutor
> > > VO.
> > > > However, i try to ping and telnet Information Service at address
> > > > grid004.ct.infn.it (port 2107) but there is no response.
> > >
> > > Don't know anything about this service. Anyways you should not need
> this
> > in
> > > order to access geclipsetutor resources ... see below.
> > >
> > > > Is this true that i will be possible to create Grid Project on
> > > geclipsetutor
> > > > after being accepted to be this VO's member??
> > >
> > > Yes!
> > >
> > > > And is
> > > > ldap://grid004.ct.infn.it:2107 the right URI of Info service
> > >
> > > No! The right bdii would be this one:
> > >
> > > ldap://iwrbdii.fzk.de:2170
> > >
> > > But here is how you can easily import all the settings you need for
> > setting
> > > up a geclipsetutor project...
> > >
> > > There are basically two ways to set up a grid project for
> geclipsetutor,
> > > automatically and by hand. Automatically only works with one of the
> newer
> > > releases of g-Eclipse. So here is the automatic option:
> > >
> > > 1) Start g-Eclipse :)
> > > 2) Go to Help -> g-Eclipse easy configuration
> > > 3) Select gLite -> Gilda -> g-Eclipse Tutor from the tree on the left
> and
> > > press finish
> > > 4) When you are asked to trust the certificate of the Gilda server
> answer
> > > with "Always trust this certificate" and press OK
> > >
> > > After the setup process you should see a project in your project tree
> > > called g-Eclipse Training. You should immediately be able to see your
> > > resources when expoanding the VO + sub nodes in that project. What did
> > > happen? The easy configuration downloaded the CA certificates, imported
> > the
> > > VO settings and set up a project for you. This is what you have to do
> by
> > > hand if you do not want to use the automatic configuration:
> > >
> > > 1) Start g-Eclipse :D
> > > 2) Go to Window -> Preferences
> > > 3) Open the g-Eclipse preference node on the left and go to "VO
> > > Declarations"
> > > 4) Choose Import on the right, leave the repository URL in the upcoming
> > > wizard as is and press Next
> > > 5) Check the geclipsetutor VO in the upcoming list (which may take some
> > > time) and press Finish. The VO gets imported
> > > 6) Now go to the g-Eclipse -> Security preferences and choose Import
> from
> > > the right
> > > 7) Choose "The Gilda certificate authority" from the very bottom of the
> > > tree and press Next
> > > 8) Check the certificate and press Finish. On any upcoming certificate
> > > trust dialog select "Always trust this certificate" and press OK
> > > 9) Close the preference dialog and go to the g-Eclipse User Perspective
> > > 10) In the Grid Project View select "New -> Grid Project" from the
> > context
> > > menu
> > > 11) In the upcoming wizard give your project a name and press Next
> > > 12) Check the geclipsetutor VO and press Finish
> > >
> > > Your project gets created and you should be able to see your resources
> as
> > > above.
> > >
> > > Hope that helps. For any further questions I recommend to use the
> > > geclipse-user mailing list (see
> > > https://dev.eclipse.org/mailman/listinfo/geclipse-user).
> > >
> > > Cheers, Mathias
> > >
> > > On Mon, Jan 12, 2009 at 7:37 PM, <harald.kornmayer@xxxxxxxxxxxx>
> wrote:
> > >
> > >
> > > Accepted email confirmation for VO geclipsetutor
> > >
> > >
> > > Dear Tran, Son,
> > >
> > > Thank you for confirming your email address. Your request for an
> > > account on VO geclipsetutor has been sent to the VO administrators.
> > >
> > > A VO administrator will probably contact you to confirm account
> > > creation.
> > >
> > > If you find any problems regarding the account registration, then
> > > please contact the VO registrar.
> > >
> > > Thank You,
> > >    VO Registration
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>