Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [emf-dev] EMF Query2 release

>> What is the impact on the community? 
The impact to the community is significant as the new EMF Query2 framework is not at all compatible with previous EMF Query. I am not sure how many applications are affected, but I will get significant pushback from my IBM community removing the old API. We can assess the impact once we have something to download and test with.

Cheers...
Anthony




From:        Ashwani Sharma <ashw.kumar@xxxxxxxxx>
To:        Anthony Hunter/Ottawa/IBM@IBMCA,
Cc:        Wayne Beaton <emo@xxxxxxxxxxx>, Eclipse Modelling Framework <emf-dev@xxxxxxxxxxx>
Date:        06/06/2011 11:48 AM
Subject:        Re: [emf-dev] EMF Query2 release




Hi Wayne,

A assessment of EMF Query2 can be definitely useful for everyone to understand its future. I will be happy to plan a review for it.

Here are some answers to your questions:
>> What is the timeframe for retiring the "original" EMF Query? 
Above mentioned assessment can help to figure it out.
Currently EMF Query does not support few features like UPDATE statements and queries using OCL statements.
Though there some workarounds for them.

>>Does it make sense to schedule a "last" release of "original" and then just move forward with Query 2?
I think this will depend on the assessment. 

>> What is the impact on the community? 
I am not aware of many users of EMF Query projects. I think the impact should be small. But Anthony can comment best on this.

>> Is there a continuity story between the frameworks?
The new framework is not at all compatible with previous. It will require users to re-write their queries.

If everyone agrees, i can plan for assessment or review. I will need details on how to do it, since this is first time for me :)

Regards,
Ashwani Kr Sharma

On Mon, Jun 6, 2011 at 8:33 PM, Anthony Hunter <anthonyh@xxxxxxxxxx> wrote:
Hi Wayne,

We cannot realistically put a timeframe for retiring the "original" EMF Query until we have done a full assessment of a released EMF Query2. Would you agree?


Cheers...
Anthony





From:        
Wayne Beaton <emo@xxxxxxxxxxx>
To:        
Anthony Hunter/Ottawa/IBM@IBMCA,
Cc:        
Ashwani Sharma <ashw.kumar@xxxxxxxxx>, Eclipse Modelling Framework <emf-dev@xxxxxxxxxxx>
Date:        
06/06/2011 10:47 AM
Subject:        Re: [emf-dev] EMF Query2 release





Just playing devil's advocate here...

When the "original" EMF Query is terminated, do we rename "EMF Query 2" to "EMF Query"?

If the EDP is the only roadblock, then we can be creative to work out a solution.

>From my POV, if the scope of the new project maps 1:1 with the existing project, I'd rather see the transition occur within the project. I don't mind creating a new project if it makes sense, but it's a greater-than-zero-cost effort for everybody involved. I'd rather focus the project-management energy that creating a new project will require into getting stuff done.

What is the timeframe for retiring the "original" EMF Query? Does it make sense to schedule a "last" release of "original" and then just move forward with Query 2? What is the impact on the community? Is there a continuity story between the frameworks?

Wayne


On 06/06/2011 10:19 AM, Anthony Hunter wrote:
"But due to lack of time from EMF Query commiters, we decided not to proceed with it."

This one small statement sums up exactly why I want to move EMF Query2 to it's own project. The new EMF Query2 project was supposed to release a replacement for EMF Query and we are still waiting. I cannot get anyone on my side to look at EMF Query2 until we have a release. I am not happy the implication is that the roadblock is the one and only "original" EMF Query committer and that would be myself.

We will restructure EMF Query into EMF Query and EMF Query2. This will remove all roadblocks on the EMF Query2 component to release their software.

I will be the lead and only committer on EMF Query. Who would like to lead EMF Query2? All of the committers can move to EMF Query2, except for myself.

Hopefully after several EMF Query2 releases we can terminate the "original" EMF Query, assuming things work out.

Cheers...
Anthony




From:         Ashwani Sharma
<ashw.kumar@xxxxxxxxx>
To:         Eclipse Modelling Framework
<emf-dev@xxxxxxxxxxx>,
Cc:         Anthony Hunter/Ottawa/IBM@IBMCA,
emo@xxxxxxxxxxx
Date:         06/04/2011 12:58 AM
Subject:         Re: [emf-dev] EMF Query2 release



Hi,

When we started contributing to EMF Query2 project, we have an understanding that EMF Query2 should be next generation query language and sometime in future might replace EMF Query. That has been the main motivation till date to keep everything part of one project.  

EMF Query2 projects are build using tycho and EMF Query is build using athena. Hence, both of them have separate update sites. I already made an attempt earlier for merger by bring EMF Query2 features under EMF Query main feature and hence created a new release plan for EMF Query as well, where we included EMF Query2.  
But due to lack of time from EMF Query commiters, we decided not to proceed with it. We decided to have inclusion of EMF Query2 only after indigo, so that it does not affect anything for EMF Query in indigo.
Hence, i asked this question now on how to make the new release after indigo.

The problem with approach of two separate projects could be that there will be two projects for same purpose of enable query on emf models. Is it acceptable ?

Regards,
Ashwani Kr Sharma

On Fri, Jun 3, 2011 at 8:38 PM, Wayne Beaton <
emo@xxxxxxxxxxx > wrote:
Hi Anthony.

It's probably easier for everybody if the EMF Query project works toward a consolidated release schedule. We could make an exception this time if there is a plan element to converge on a shared schedule with common version numbering.

Having two different sets of committers within the same project managed via social convention is IMHO a Good Thing(tm).

AFAICT, there is only one Bugzilla component for EMF Query. Likewise, there is only one entry for EMF Query in IPZilla. I assume that you mean that the two could be relatively easily separated.

Frankly, the only representation that I see of them being separate is on the EMF project website. As I look more at the project, it seems very clear that Query 2 is already acting very much like a separate project.

Ultimately, it's up to you. If the two different streams are irreconcilable, then they probably make sense as two separate projects. I recommend a restructuring review that pulls Query 2 out of Query into it's own separate sibling project. That will require some effort to identify those bugs/ipzilla records, and source that need to be moved.

HTH,

Wayne


On 06/03/2011 09:45 AM, Anthony Hunter wrote:
Hi Wayne,

I figure I should ask the EMO this question.

The EMF Query project has two components,
1) the original EMF Query component contributed by IBM when the project was started.
2) a new EMF Query 2 component contributed by SAP.

As I said below, EMF Query and EMF Query2 are two completely separate components in one project with separate committers, bugzillas, builds and IP.

EMF Query is doing a release in Indigo.

EMF Query2 did not do a release in Indigo but now wants to do a post Indigo release.

How is this going to work when EMF Query is one project from the EMO perspective? Maybe a restructure of EMF Query2 into a separate project is the only way?

Cheers...
Anthony




From:         Anthony Hunter/Ottawa/IBM@IBMCA
To:         Eclipse Modelling Framework
<emf-dev@xxxxxxxxxxx> ,
Date:         06/03/2011 09:38 AM
Subject:         Re: [emf-dev] EMF Query2 release
Sent by:        
emf-dev-bounces@xxxxxxxxxxx



Hi Ashwani,

I really think it is time to consider a restructure. EMF Query and EMF Query2 are two completely separate components in one project with separate committers, bugzillas, builds and IP.

It would be so much easier if we separated them.

What do you all think?

Cheers...
Anthony




From:         Ashwani Sharma
<ashw.kumar@xxxxxxxxx>
To:         Eclipse Modelling Framework
<emf-dev@xxxxxxxxxxx> ,
Date:         06/03/2011 12:48 AM
Subject:         [emf-dev] EMF Query2 release
Sent by:        
emf-dev-bounces@xxxxxxxxxxx



Hi,

I am a committer for EMF Query2.

Currently, EMF Query2 sources are under EMF Query cvs project location. We have made EMF Query2 sources ready for release.
Since EMF Query2 was decided to be part of EMF Query with different namespace, having them under same update site will be better. This change should happen after indigo release is completed, since we don't want to contribute in simultaneous release of indigo.

Can you please guide us on how we should proceed with this ?  
We want to get ready, so that we can make a release once the indigo release is done by eclipse.

Thanks and Regards,
Ashwani Kr Sharma

_______________________________________________
emf-dev mailing list

emf-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/emf-dev
_______________________________________________
emf-dev mailing list

emf-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/emf-dev


_______________________________________________
emf-dev mailing list

emf-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/emf-dev




Back to the top