Hi Scott
Thanks for your response.
I am using jmdns discovery and ECF generic
Yes,on termination of host,in the consumer side i am geting the
event removedService(ServiceReference arg0, Object proxy)
of ServiceTrackerCustomizer .but after that if i start the host
equinox,consumer is not able to receive any event
of addingService(ServiceReference reference) of
the ServiceTrackerCustomizer.
If i use close osgi console command,consumer is able to receive
addingService event once the host started again.
Thanks an Regards
Abhisek
On Wed, May 19, 2010 at 1:58 AM, Scott Lewis <slewis@xxxxxxxxxxxxx
<mailto:slewis@xxxxxxxxxxxxx>> wrote:
Hi Abhisek,
abhisek saikia wrote:
Hi Scott
Today i tried with ECF
org.eclipse.ecf.sdk_3.3.0.v20100518-1435 from head.It has the
fix for this issue.I tested my use case for multiple service
call.Its working fine.
But the other issue is still there(abrupt termination of
provider).
This issue can be reproduced with any ECF generic sample. I
also have attached the sample which i tried
Steps to reproduce:
1.start consumer equinox
2.start provider equinox
3.let the service calls happen
4.terminate provider equinox using kill -9(if using unix
environment) or kill from task manager(windows) or press
terminate button(if launching from eclipse)
Ok. So I would like to work through this case a little bit with
you...understand what you are seeing...and we'll open a bug and
address it if necessary.
First please verify these assumptions:
a) Using zeroconf/jmdns for discovery
b) Using ECF generic for distribution
c) You are using 'provider' rather than 'host' for terminology (I
know that OSGi remote services spec uses 'provider' but I/we don't
use that because we also have the concept of a 'provider',
separate from the remote services role...i.e. host and consumer.
Here's my assumptions about what is happening (please
verify/clarify): you start the consumer first (1), and then the
host (2). The remote service is registered by host, and published
via jmdns discovery provider. The consumer discovers the remote
service, creates a proxy, and the consumer's
ServiceTrackerCustomizer.addingService method is called. In the
consumer example code this results in several remote service calls
(i.e. via the proxy, as well as via async/Future and
async/Callback. These calls complete successfully.
At this point, the host is terminated. What happens then on the
consumer for you? On my tests, if I terminate the host via
Eclipse (i.e. the red stop button), I immediately see the
following output on my consumer console:
IHello Service proxy removed
[log;-0700 2010.05.18
13:04:13:273;INFO;org.eclipse.ecf.osgi.services.distribution;OSGi
ECF service distribution: unregistered
endpointDescription=RemoteServiceEndpointDescriptionImpl[svcInterfaces=[org.eclipse.ecf.examples.remoteservices.hello.IHello];supportedConfigTypes=[ecf.generic.server];serviceIntents=null;location=null;remoteServiceId=0;discoveryServiceID=ServiceID[type=ServiceTypeID[typeName=_osgiservices._tcp.default._iana];location=osgiservices://192.168.1.102:3787/svc_0;full=_osgiservices._tcp.default._iana@osgiservices://192.168.1.102:3787/svc_0];endpointID=null;endpointAsID=StringID[ecftcp://localhost:3787/server];connectTargetID=null;remoteServicesFilter=null;props={ecf.rsvc.ns=ecf.namespace.generic.remoteservice
<http://192.168.1.102:3787/svc_0;full=_osgiservices._tcp.default._iana@osgiservices://192.168.1.102:3787/svc_0%5D%3BendpointID%3Dnull%3BendpointAsID%3DStringID%5Becftcp://localhost:3787/server%5D;connectTargetID=null;remoteServicesFilter=null;props=%7Becf.rsvc.ns=ecf.namespace.generic.remoteservice>,
osgi.remote.service.interfaces=org.eclipse.ecf.examples.remoteservices.hello.IHello,
ecf.sp.cns=org.eclipse.ecf.core.identity.StringID, ecf.rsvc.id
<http://ecf.rsvc.id>=[B@c3e967, ecf.sp.ect=ecf.generic.server,
ecf.sp.cid=[B@1079ff}]
proxyServiceRegistration=
{org.eclipse.ecf.examples.remoteservices.hello.IHello}={service.imported=org.eclipse.ecf.provider.remoteservice.generic.RemoteServiceImpl@1cb374f,
service.imported.configs=[ecf.generic.client], service.id
<http://service.id>=52}
]
The first line 'IHello Service proxy removed' indicates that the
remote service registration *is* getting cleaned up when the
connect with the remote host is terminated...this is some comment
code that I added to the ServiceTrackerCustomizer.removedService
method (which is called when the appropriate service is removed).
The log message confirms (via the IProxyDistributionListener) that
the remote service proxy registration was removed.
This is basically as it should be...as the remote service proxy is
being cleaned up. Notice, however, that there is no undiscovery
event received on the consumer. That's because with zeroconf,
since the host was terminated abnormally, the host was not able to
send out an zeroconf 'unpublish' to the consumer. The ECF generic
provider *did* get the socket close, and this was/is used to do
the proxy remove clean up...but the discovery mechanism still has
the remote service in it's cache.
So, in fact, zeroconf still believes the remote services is out
there. Zeroconf has what's called a 'time to live' for the
multicast message...and until that expires the remote osgi service
information will be present.
But my question is...assuming you are seeing the same thing as
above...what do you do now?...and what is the result?...and how
does this result differ from what you are expecting to happen?
Thanks. With your further assistance I think this should be easy
to identify and fix.
Scott
And about container connect,which spring is using might not be
an issue with ECF,may be in spring code we need to handle in
such a way that we connect only after remote service has been
discovered.May be angelo can provide more clarification on it.
In the present version i faced only one issue which i have
mentioned.
Thanks and Regards
Abhisek
On Tue, May 18, 2010 at 12:42 AM, Scott Lewis
<slewis@xxxxxxxxxxxxx <mailto:slewis@xxxxxxxxxxxxx>
<mailto:slewis@xxxxxxxxxxxxx <mailto:slewis@xxxxxxxxxxxxx>>>
wrote:
Hi Abhisek,
abhisek saikia wrote:
Hi Scott
Existing or new container both are ok for me.For
me just
the service call should be successful which i guess
should be
the major specification of ECF :).I am currently not going
with container.connect option with multiple containers
as it
had the defect for which client(consumer) needs to be
started
first ,Also been reproduced by angelo @
http://dev.eclipse.org/mhonarc/lists/ecf-dev/msg03635.html
Could you and/or Angelo please open a bug about this
issue?...and
include the explanation from Angelo in the bug description?
Also, please address this question on the bug:
On the consumer, if the spring framework is creating a
container,
and connecting to a targetId with code like this (the
following is
copied from Angelo's mailing list post):
protected IContainer createContainer() throws
ContainerCreateException,
ContainerConnectException {
IContainer container = super.createBasicContainer();
if (targetId != null) {
container.connect(targetId, connectContext);
}
return container;
}
Whenever this code is executed (e.g. upon startup), then
this logic:
if (targetId != null) {
container.connect(targetId, connectContext);
}
*will* synchronously attempt to connect to the service
host...and
if the service host is not yet started (whether localhost
or some
other process) you will get a a connect exception...e.g.
like he got:
Caused by: org.eclipse.ecf.core.ContainerConnectException:
Exception during connection to ecftcp://localhost:3787/server
<stack trace deleted>
... 17 more
Caused by: java.net.ConnectException: Connection refused:
connect
This means simply that the spring initialization code is
trying to
connect directly to a given host container (i.e. targetId), and
that container hasn't had a chance to startup, register the
remote
service, and then publish the remote service for discovery
by the
consumer. In other words, the consumer framework startup is
racing against the startup/initialization of the host.
One way to avoid the need to explicitly call
container.connect(targetId, connectContext) at *all* is to
(on the
consumer) wait until the remote service is discovered via
discovery...and only *then* have the container connect to the
target container. The logic for doing so (i.e. connect to the
target container) is already present in the
DefaultProxyContainerFinder, and the equivalent to targetId is
already included in the metadata available via discovery. One
major change in DefaultProxyContainerFinder *since* the
release of
ECF 3.2 was represented by this bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=303979
This makes it unnecessary to even create a proxy container in
advance of the service discovery, as after this bug was
addressed
a container will be automatically created (if one doesn't
already
exist) for dealing with incoming remote services being
discovered.
In other words, I believe that with the most recent code from
HEAD it should be unnecessary for the spring framework bean
to be
created on the consumer side at all. Both the container
creation
and the connection can/could all be done lazily...at remote
service discovery time instead of eagerly (at spring bean
creation
time).
But I'm probably misunderstanding something about your/Angelo's
use case. So let's please move this to a new bug,
however, and
we can discuss further/diagnose/etc on that new bug.
Thanks,
Scott
Anyway as per your suggestion i will try with the
unreleased
code chunk of ECF .
Thanks and Regards
Abhisek
On Mon, May 17, 2010 at 11:33 PM, Scott Lewis
<slewis@xxxxxxxxxxxxx <mailto:slewis@xxxxxxxxxxxxx>
<mailto:slewis@xxxxxxxxxxxxx <mailto:slewis@xxxxxxxxxxxxx>>
<mailto:slewis@xxxxxxxxxxxxx
<mailto:slewis@xxxxxxxxxxxxx> <mailto:slewis@xxxxxxxxxxxxx
<mailto:slewis@xxxxxxxxxxxxx>>>>
wrote:
Hi Abhisek,
You seem to be using ECF 3.2 release version
(Release date:
Feb
19, 2010). There have been a number of bugs fixed since
then...one of which having to do with a problem of
not properly
publishing the same service multiple times. For
testing, bug
identification, etc I would urge you to get the
latest from
HEAD,
as we are in the testing phase for ECF 3.3/Helios
release right
now...and so it would be most helpful to get some
assistance from
the community with testing ECF 3.3/Helios for your
specific use
cases. If you need instructions for how to get the
lastest
from
HEAD in your workspace please let me know...and/or
see section
'Anonymous CVS Access to ECF Source Code':
http://www.eclipse.org/ecf/dev_resources.php
abhisek saikia wrote:
Hi Scott
I used
org.eclipse.ecf.sdk_3.2.0.v20100219-1253.zip
<http://www.eclipse.org/downloads/download.php?file=/rt/ecf/3.2/3.6/org.eclipse.ecf.sdk_3.2.0.v20100219-1253.zip>
My issue is a bit different.I have 2
providers(in 2
different machines) and one consumer in another
machine.The
providers implement the same Interface.I am
using Service
tracker in consumer side.I am able to receive
only one
remote
reference.While debugging ECF code i found if a
container is
already connected(i.e it already discovered
provider in
machine 1),it cant find the remote service
reference from
machine 2(as the code has a check for
isContainerConnect which
is true while remotelocation becomes machine2,
as its
already
connected to provider of machine 1) .
A couple of things. First...since 3.2 there has
been some
improvement/change of the logic in
DefaultProxyContainerFinder wrt
handling of multiple remote services.
Second...it is possible that this represents a
bug/problem
in the
DefaultProxyContainerFinder for handling your use case.
Third...it's also possible that for your use case
there is an
ambiguity about what you want to happen on the
multiple-service
consumer...i.e. do you want the *existing* proxy
container
to be
used, or do you want a *new* container to be
created/connected for
this remote service? There are some facilities already
present in
ECF to support some of these use cases, so it may be a
matter of
figuring out what you wish to happen and then using
those
facilities.
So...I recommend that you get the latest code from HEAD,
and try
this same use case again. If it still has problems
then lets
identify them, and we'll address those problems
and/or needed
generalization to handle your use case.
Thanks,
Scott
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>
<mailto:ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>>
<mailto:ecf-dev@xxxxxxxxxxx
<mailto:ecf-dev@xxxxxxxxxxx> <mailto:ecf-dev@xxxxxxxxxxx
<mailto:ecf-dev@xxxxxxxxxxx>>>
https://dev.eclipse.org/mailman/listinfo/ecf-dev
------------------------------------------------------------------------
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>
<mailto:ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>>
https://dev.eclipse.org/mailman/listinfo/ecf-dev
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>
<mailto:ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>>
https://dev.eclipse.org/mailman/listinfo/ecf-dev
------------------------------------------------------------------------
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>
https://dev.eclipse.org/mailman/listinfo/ecf-dev
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx <mailto:ecf-dev@xxxxxxxxxxx>
https://dev.eclipse.org/mailman/listinfo/ecf-dev
------------------------------------------------------------------------
_______________________________________________
ecf-dev mailing list
ecf-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ecf-dev
