Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
[dsdp-tm-dev] RE: dsdp-tm-dev Digest, Vol 50, Issue 3

I told you to set the keepalive to 40 for 40 seconds.
Did you try that?

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
 
 

> -----Original Message-----
> From: vrushali babar [mailto:vrush_com@xxxxxxxxx] 
> Sent: Thursday, September 24, 2009 1:42 PM
> To: dsdp-tm-dev@xxxxxxxxxxx; Oberhuber, Martin
> Subject: RE: dsdp-tm-dev Digest, Vol 50, Issue 3
> 
> Thanks Martin,
> That helped in understanding the difference but I'm still 
> stuck with the connection getting canceled problem.
> Tried n number of options but failed everytime. Tried setting 
> keepalive for 1200 i.e 20 mins, but got connection canceled popup. 
> Could you suggest what should I be doing to keep any 
> connection up and alive for an hour.
> Badly stuck. 
> Any help or pointer will be of great help.
> 
> Thanks,
> Vrushali.
> 
> 
> --- On Wed, 9/23/09, Oberhuber, Martin 
> <Martin.Oberhuber@xxxxxxxxxxxxx> wrote:
> 
> > From: Oberhuber, Martin <Martin.Oberhuber@xxxxxxxxxxxxx>
> > Subject: RE: dsdp-tm-dev Digest, Vol 50, Issue 3
> > To: "vrushali babar" <vrush_com@xxxxxxxxx>, dsdp-tm-dev@xxxxxxxxxxx
> > Date: Wednesday, September 23, 2009, 8:30 PM
> > Vrushali,
> > 
> > timeout --> how long RSE will try to make a connection
> > before it gives up.
> >             If you can
> > connect, then timeout is OK for you.
> > 
> > keepalive --> after what time of inactivity RSE will
> > send a keepalive packet
> >               to keep
> > the server from closing the seemingly inactive connection.
> > 
> > The default for keepalive is 300 (5 minutes). Your server
> > may require 40
> > (40 seconds) to make sure it doesn't close the connection
> > after a minute.
> > 
> > Cheers,
> > --
> > Martin Oberhuber, Senior Member of Technical Staff, Wind
> > River
> > Target Management Project Lead, DSDP PMC Member
> > http://www.eclipse.org/dsdp/tm
> >  
> >  
> > 
> > > -----Original Message-----
> > > From: vrushali babar [mailto:vrush_com@xxxxxxxxx]
> > 
> > > Sent: Wednesday, September 23, 2009 10:11 AM
> > > To: dsdp-tm-dev@xxxxxxxxxxx;
> > Oberhuber, Martin
> > > Subject: Re: dsdp-tm-dev Digest, Vol 50, Issue 3
> > > 
> > > Hi,
> > > 
> > > I'm litle confussed between two terms here,
> > > 1 - timeout
> > > 2 - keepalive
> > > 
> > > I'm not much clear about the difference between two.
> > > Once I connect to Remote server,I need the connection
> > to be 
> > > up for an hour.
> > > I tried setting different values for timeout and
> > keepalive 
> > > but nothing worked. So is it possible to explain the
> > meanings 
> > > of above mentioned two terms and possible settings to
> > keep 
> > > the connection up for an hour?
> > > 
> > > Thanks a lot in advance,
> > > 
> > > Vrushali.
> > > 
> > > --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > 
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > wrote:
> > > 
> > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > 
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue 3
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Date: Thursday, September 17, 2009, 8:22 PM
> > > > Send dsdp-tm-dev mailing list
> > > > submissions to
> > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > 
> > > > To subscribe or unsubscribe via the World Wide
> > Web, visit
> > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > or, via email, send a message with subject or
> > body 'help'
> > > > to
> > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > 
> > > > You can reach the person managing the list at
> > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > 
> > > > When replying, please edit your Subject line so
> > it is more
> > > > specific
> > > > than "Re: Contents of dsdp-tm-dev digest..."
> > > > 
> > > > 
> > > > Today's Topics:
> > > > 
> > > >    1. Re: dsdp-tm-dev Digest, Vol 50, Issue
> > > > 2 (vrushali babar)
> > > >    2. RE: Re: dsdp-tm-dev Digest, Vol 50,
> > > > Issue 2 (Oberhuber, Martin)
> > > > 
> > > > 
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > 
> > > > Message: 1
> > > > Date: Thu, 17 Sep 2009 05:40:53 -0700 (PDT)
> > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev Digest,
> > Vol 50,
> > > > Issue 2
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Message-ID: <39166.58465.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset=iso-8859-1
> > > > 
> > > > Hi Martin,
> > > > 
> > > > Thanks for your reply.
> > > > I can SSH to remote server by using RSE and even
> > by command
> > > > line.
> > > > In case of command line, even if I leave my
> > machine idle
> > > > for 3-4 hours, my connection remains as it is.
> > > > But in case of RSE, even if I leave my machine
> > idle for 5
> > > > mins, whatever connections I've made, I need to
> > reconnect to
> > > > all of them. 
> > > > 
> > > > To make connection I'm using following code
> > > > 
> > > > 
> > > > 
> > > > 
> > > > private void connect(final ISubSystem subsys,
> > final
> > > > IProgressMonitor monitor) {
> > > >         //
> > > > monitor.beginTask("Connecting", 10);
> > > >     if (!subsys.isConnected()) {
> > > >     final Exception[] exception = new
> > > > Exception[1];
> > > >         exception[0] = null;
> > > >        
> > > > Display.getDefault().syncExec(new Runnable() {
> > > >         public void run() {
> > > >         try {
> > > >         ((SubSystem)
> > > > subsys).promptForPassword();
> > > >         } catch (Exception e)
> > > > {
> > > >            
> > > > exception[0] = e;
> > > >         }
> > > >         }
> > > >     });
> > > >     try {   
> > > >             
> > > >        
> > > > subsys.getConnectorService().connect(monitor);
> > > >     } catch (Exception e) {
> > > >     e.printStackTrace();
> > > >     }
> > > >     if (subsys.isConnected()) {
> > > >     // Notify connect status change
> > > >     Display.getDefault().asyncExec(new
> > > > Runnable() {
> > > >     public void run() {
> > > >     IPropertySet ps[] =
> > > > subsys.getConnectorService().getPropertySets();
> > > >     for(int i=0
> > > > ;i<ps.length;i++)       
> > > >            
> > > > System.out.println(i+1 + "\tName" +
> > ps[i].getName());
> > > >            
> > > >            
> > > > //ps[0].
> > > >            
> > > >            
> > > > RSECorePlugin.getTheSystemRegistry()
> > > >            
> > > >            
> > > >        
> > > > .connectedStatusChange(subsys, true, false);
> > > >     }
> > > >     });
> > > >          }
> > > >        }
> > > >         // monitor.done();
> > > > }
> > > > 
> > > > 
> > > > With the above code I can work well if I'm not
> > leaving
> > > > Eclipse instance idle even for 2 mins. But
> > otherwise I need
> > > > to reconnect.
> > > > Please suggest if I'm going somewhere wrong or if
> > I need to
> > > > do anything different. 
> > > > 
> > > > Stuck badly. 
> > > > 
> > > > Thanks a lot in advance,
> > > > Vrushali.
> > > > 
> > > > 
> > > > 
> > > > --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > wrote:
> > > > 
> > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue
> > 2
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Date: Thursday, September 17, 2009, 3:50 PM
> > > > > Send dsdp-tm-dev mailing list
> > > > > submissions to
> > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > 
> > > > > To subscribe or unsubscribe via the World
> > Wide Web,
> > > > visit
> > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > or, via email, send a message with subject
> > or body
> > > > 'help'
> > > > > to
> > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > 
> > > > > You can reach the person managing the list
> > at
> > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > 
> > > > > When replying, please edit your Subject line
> > so it is
> > > > more
> > > > > specific
> > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > > 
> > > > > 
> > > > > Today's Topics:
> > > > > 
> > > > >    1. Re: dsdp-tm-dev Digest, Vol 50,
> > Issue
> > > > > 1 (vrushali babar)
> > > > >    2. Re: Connection timed out
> > > > > error...RSEG1058 (vrushali babar)
> > > > >    3. RE: Re: Connection timed out
> > > > > error...RSEG1058 (Oberhuber, Martin)
> > > > > 
> > > > > 
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > 
> > > > > Message: 1
> > > > > Date: Wed, 16 Sep 2009 21:29:22 -0700 (PDT)
> > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev
> > Digest, Vol
> > > > 50,
> > > > > Issue 1
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Message-ID: <327503.2668.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset=iso-8859-1
> > > > > 
> > > > > 
> > > > > Hi David,
> > > > > 
> > > > > I'm using SSH option to make connection. is
> > there any
> > > > > method by which i can extend the connection
> > timeout
> > > > range?
> > > > > 
> > > > > Thanks,
> > > > > Vrushali.
> > > > > 
> > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > wrote:
> > > > > 
> > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > Subject: dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Date: Wednesday, September 16, 2009,
> > 9:30 PM
> > > > > > Send dsdp-tm-dev mailing list
> > > > > > submissions to
> > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > 
> > > > > > To subscribe or unsubscribe via the
> > World Wide
> > > > Web,
> > > > > visit
> > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > or, via email, send a message with
> > subject or
> > > > body
> > > > > 'help'
> > > > > > to
> > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > 
> > > > > > You can reach the person managing the
> > list at
> > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > 
> > > > > > When replying, please edit your Subject
> > line so
> > > > it is
> > > > > more
> > > > > > specific
> > > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > > > 
> > > > > > 
> > > > > > Today's Topics:
> > > > > > 
> > > > > >    1. Connection timed out
> > error...RSEG1058
> > > > > > (vrushali babar)
> > > > > >    2. Re: Connection timed out
> > > > > > error...RSEG1058 (David McKnight)
> > > > > > 
> > > > > > 
> > > > > >
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > 
> > > > > > Message: 1
> > > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700
> > (PDT)
> > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > Subject: [dsdp-tm-dev] Connection timed
> > out
> > > > > > error...RSEG1058
> > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5.
> > I could
> > > > make
> > > > > > connection to remote server
> > programmatically but
> > > > > suffering
> > > > > > from connection timed out error
> > RSEG1058, saying
> > > > > 'Connect to
> > > > > > Remote_server_name was cancelled'.
> > > > > > 
> > > > > > I tried setting Connection timeout
> > using
> > > > Preference
> > > > > page
> > > > > > (Windows -> Preferences -> Remote
> > Systems
> > > > ->
> > > > > Data
> > > > > > Store) by setting the value to 64800000
> > but
> > > > still
> > > > > doesn't
> > > > > > seemed to be solving my problem. 
> > > > > > Even after making the change in
> > connection
> > > > timeout
> > > > > range,
> > > > > > i'm getting disconnected with the very
> > short
> > > > period
> > > > > of
> > > > > > time.
> > > > > > 
> > > > > > So I am in need of some way to set
> > connection
> > > > timeout
> > > > > when
> > > > > > I'm connecting to remote server. Please
> > provide
> > > > > pointers and
> > > > > > even anyone could tell me what is the
> > default
> > > > > timeout?
> > > > > > 
> > > > > > Thanks in advance,
> > > > > > Vrushali.
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > > 
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > > Message: 2
> > > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > Subject: Re: [dsdp-tm-dev] Connection
> > timed out
> > > > > > error...RSEG1058
> > > > > > To: Target Management developer
> > discussions
> > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > Message-ID:
> > > > > >     
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > > > 
> > > > > > Skipped content of type
> > > > > multipart/alternative--------------
> > > > > > next part --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: graycol.gif
> > > > > > Type: image/gif
> > > > > > Size: 105 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/graycol.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: pic26832.gif
> > > > > > Type: image/gif
> > > > > > Size: 1255 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/pic26832.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: ecblank.gif
> > > > > > Type: image/gif
> > > > > > Size: 45 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/ecblank.gif
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > >
> > _______________________________________________
> > > > > > dsdp-tm-dev mailing list
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > 
> > > > > > 
> > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > >
> > ******************************************
> > > > > > 
> > > > > 
> > > > > 
> > > > >       
> > > > > 
> > > > > 
> > > > > ------------------------------
> > > > > 
> > > > > Message: 2
> > > > > Date: Thu, 17 Sep 2009 00:09:05 -0700 (PDT)
> > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > Subject: [dsdp-tm-dev] Re: Connection timed
> > out
> > > > > error...RSEG1058
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Message-ID: <113449.25932.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset=iso-8859-1
> > > > > 
> > > > > 
> > > > > Hi David,
> > > > > 
> > > > > I'm trying to SSH connection. Looked for any
> > manual
> > > > setting
> > > > > available to set connection time out range
> > but didn't
> > > > find
> > > > > anything (Whatever I got was for Dstore).
> > > > > While searching, i came across the following
> > bug id
> > > > > 
> > > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > > > 
> > > > > so looks like there is some solution
> > available. 
> > > > > Till now i have finished following 
> > > > > - getting instance if IHost
> > > > > - getting related ISubsystem
> > > > > - Getting credentials if not yet provided
> > and
> > > > connecting to
> > > > > remote server
> > > > > 
> > > > > but stuck at connection time out error.
> > > > > Can you suggest if there is any method to
> > set
> > > > connection
> > > > > time out?
> > > > > Help would be really grateful.
> > > > > 
> > > > > Thanks a ton,
> > > > > Vrushali.
> > > > > 
> > > > > 
> > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > wrote:
> > > > > 
> > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > Subject: dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Date: Wednesday, September 16, 2009,
> > 9:30 PM
> > > > > > Send dsdp-tm-dev mailing list
> > > > > > submissions to
> > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > 
> > > > > > To subscribe or unsubscribe via the
> > World Wide
> > > > Web,
> > > > > visit
> > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > or, via email, send a message with
> > subject or
> > > > body
> > > > > 'help'
> > > > > > to
> > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > 
> > > > > > You can reach the person managing the
> > list at
> > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > 
> > > > > > When replying, please edit your Subject
> > line so
> > > > it is
> > > > > more
> > > > > > specific
> > > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > > > 
> > > > > > 
> > > > > > Today's Topics:
> > > > > > 
> > > > > >    1. Connection timed out
> > error...RSEG1058
> > > > > > (vrushali babar)
> > > > > >    2. Re: Connection timed out
> > > > > > error...RSEG1058 (David McKnight)
> > > > > > 
> > > > > > 
> > > > > >
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > 
> > > > > > Message: 1
> > > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700
> > (PDT)
> > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > Subject: [dsdp-tm-dev] Connection timed
> > out
> > > > > > error...RSEG1058
> > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5.
> > I could
> > > > make
> > > > > > connection to remote server
> > programmatically but
> > > > > suffering
> > > > > > from connection timed out error
> > RSEG1058, saying
> > > > > 'Connect to
> > > > > > Remote_server_name was cancelled'.
> > > > > > 
> > > > > > I tried setting Connection timeout
> > using
> > > > Preference
> > > > > page
> > > > > > (Windows -> Preferences -> Remote
> > Systems
> > > > ->
> > > > > Data
> > > > > > Store) by setting the value to 64800000
> > but
> > > > still
> > > > > doesn't
> > > > > > seemed to be solving my problem. 
> > > > > > Even after making the change in
> > connection
> > > > timeout
> > > > > range,
> > > > > > i'm getting disconnected with the very
> > short
> > > > period
> > > > > of
> > > > > > time.
> > > > > > 
> > > > > > So I am in need of some way to set
> > connection
> > > > timeout
> > > > > when
> > > > > > I'm connecting to remote server. Please
> > provide
> > > > > pointers and
> > > > > > even anyone could tell me what is the
> > default
> > > > > timeout?
> > > > > > 
> > > > > > Thanks in advance,
> > > > > > Vrushali.
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > > 
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > > Message: 2
> > > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > Subject: Re: [dsdp-tm-dev] Connection
> > timed out
> > > > > > error...RSEG1058
> > > > > > To: Target Management developer
> > discussions
> > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > Message-ID:
> > > > > >     
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > > > 
> > > > > > Skipped content of type
> > > > > multipart/alternative--------------
> > > > > > next part --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: graycol.gif
> > > > > > Type: image/gif
> > > > > > Size: 105 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/graycol.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: pic26832.gif
> > > > > > Type: image/gif
> > > > > > Size: 1255 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/pic26832.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: ecblank.gif
> > > > > > Type: image/gif
> > > > > > Size: 45 bytes
> > > > > > Desc: not available
> > > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090916/602c221b/ecblank.gif
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > >
> > _______________________________________________
> > > > > > dsdp-tm-dev mailing list
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > 
> > > > > > 
> > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > >
> > ******************************************
> > > > > > 
> > > > > 
> > > > > 
> > > > >       
> > > > > 
> > > > > 
> > > > > ------------------------------
> > > > > 
> > > > > Message: 3
> > > > > Date: Thu, 17 Sep 2009 12:19:41 +0200
> > > > > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > > > > Subject: RE: [dsdp-tm-dev] Re: Connection
> > timed out
> > > > > error...RSEG1058
> > > > > To: "Target Management developer
> > discussions"
> > > > >     <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Message-ID:
> > > > >     
> > > 
> <460801A4097E3D4CA04CC64EE64858480ADD8C80@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset="iso-8859-1"
> > > > > 
> > > > > Vrushali,
> > > > > 
> > > > > I doubt that you really have a timeout
> > problem.
> > > > > 
> > > > > Can you connect your host with some
> > commandline tool
> > > > > outside
> > > > > Eclipse? Is sftp-server available on your
> > remote
> > > > host?
> > > > > 
> > > > > I suggest that you try the TM-Terminal to
> > connect to
> > > > your
> > > > > host.
> > > > > This just needs a shell and no sftp-server
> > -- and
> > > > allows
> > > > > setting
> > > > > a timeout value directly in its UI.
> > > > > 
> > > > > RSE also allows setting a timeout value in
> > the
> > > > connection
> > > > > wizard
> > > > > or connection properties, see attached.
> > > > > 
> > > > > Cheers,
> > > > > --
> > > > > Martin Oberhuber, Senior Member of Technical
> > Staff,
> > > > Wind
> > > > > River
> > > > > Target Management Project Lead, DSDP PMC
> > Member
> > > > > http://www.eclipse.org/dsdp/tm
> > > > >  
> > > > >  
> > > > > 
> > > > > > -----Original Message-----
> > > > > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > 
> > > > > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > > > > On Behalf Of vrushali babar
> > > > > > Sent: Thursday, September 17, 2009 9:09
> > AM
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Subject: [dsdp-tm-dev] Re: Connection
> > timed out
> > > > > error...RSEG1058
> > > > > > 
> > > > > > 
> > > > > > Hi David,
> > > > > > 
> > > > > > I'm trying to SSH connection. Looked
> > for any
> > > > manual
> > > > > setting 
> > > > > > available to set connection time out
> > range but
> > > > didn't
> > > > > find 
> > > > > > anything (Whatever I got was for
> > Dstore).
> > > > > > While searching, i came across the
> > following bug
> > > > id
> > > > > > 
> > > > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > > > > 
> > > > > > so looks like there is some solution
> > available. 
> > > > > > Till now i have finished following 
> > > > > > - getting instance if IHost
> > > > > > - getting related ISubsystem
> > > > > > - Getting credentials if not yet
> > provided and
> > > > > connecting to 
> > > > > > remote server
> > > > > > 
> > > > > > but stuck at connection time out
> > error.
> > > > > > Can you suggest if there is any method
> > to set
> > > > > connection time out?
> > > > > > Help would be really grateful.
> > > > > > 
> > > > > > Thanks a ton,
> > > > > > Vrushali.
> > > > > > 
> > > > > > 
> > > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > 
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > wrote:
> > > > > > 
> > > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > 
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > > Subject: dsdp-tm-dev Digest, Vol
> > 50, Issue
> > > > 1
> > > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > Date: Wednesday, September 16,
> > 2009, 9:30
> > > > PM
> > > > > > > Send dsdp-tm-dev mailing list
> > > > > > > submissions to
> > > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > 
> > > > > > > To subscribe or unsubscribe via
> > the World
> > > > Wide
> > > > > Web, visit
> > > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > or, via email, send a message with
> > subject
> > > > or
> > > > > body 'help'
> > > > > > > to
> > > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > > 
> > > > > > > You can reach the person managing
> > the list
> > > > at
> > > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > > 
> > > > > > > When replying, please edit your
> > Subject line
> > > > so
> > > > > it is more
> > > > > > > specific
> > > > > > > than "Re: Contents of dsdp-tm-dev
> > > > digest..."
> > > > > > > 
> > > > > > > 
> > > > > > > Today's Topics:
> > > > > > > 
> > > > > > >    1. Connection timed out
> > > > error...RSEG1058
> > > > > > > (vrushali babar)
> > > > > > >    2. Re: Connection timed out
> > > > > > > error...RSEG1058 (David McKnight)
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > >
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > > 
> > > > > > > Message: 1
> > > > > > > Date: Tue, 15 Sep 2009 22:21:40
> > -0700 (PDT)
> > > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > > Subject: [dsdp-tm-dev] Connection
> > timed out
> > > > > > > error...RSEG1058
> > > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > > > 
> > > > > > > Hi,
> > > > > > > 
> > > > > > > I'm using RSE-SDK-3.1 and Eclipse
> > 3.5. I
> > > > could
> > > > > make
> > > > > > > connection to remote server
> > programmatically
> > > > but
> > > > > suffering
> > > > > > > from connection timed out error
> > RSEG1058,
> > > > saying
> > > > > 'Connect to
> > > > > > > Remote_server_name was
> > cancelled'.
> > > > > > > 
> > > > > > > I tried setting Connection timeout
> > using
> > > > > Preference page
> > > > > > > (Windows -> Preferences ->
> > Remote
> > > > Systems
> > > > > -> Data
> > > > > > > Store) by setting the value to
> > 64800000 but
> > > > still
> > > > > doesn't
> > > > > > > seemed to be solving my problem. 
> > > > > > > Even after making the change in
> > connection
> > > > > timeout range,
> > > > > > > i'm getting disconnected with the
> > very
> > > > short
> > > > > period of
> > > > > > > time.
> > > > > > > 
> > > > > > > So I am in need of some way to
> > set
> > > > connection
> > > > > timeout when
> > > > > > > I'm connecting to remote server.
> > Please
> > > > provide
> > > > > pointers and
> > > > > > > even anyone could tell me what is
> > the
> > > > default
> > > > > timeout?
> > > > > > > 
> > > > > > > Thanks in advance,
> > > > > > > Vrushali.
> > > > > > > 
> > > > > > > 
> > > > > > >       
> > > > > > > 
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > > Message: 2
> > > > > > > Date: Wed, 16 Sep 2009 06:29:23
> > -0400
> > > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > > Subject: Re: [dsdp-tm-dev]
> > Connection timed
> > > > out
> > > > > > > error...RSEG1058
> > > > > > > To: Target Management developer
> > discussions
> > > > 
> > > > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > > Message-ID:
> > > > > > >     
> > > > > > 
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > > > charset="us-ascii"
> > > > > > > 
> > > > > > > Skipped content of type
> > > > > multipart/alternative--------------
> > > > > > > next part --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: graycol.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 105 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > s/20090916/602c221b/graycol.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: pic26832.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 1255 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > s/20090916/602c221b/pic26832.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: ecblank.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 45 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > s/20090916/602c221b/ecblank.gif
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > >
> > > > _______________________________________________
> > > > > > > dsdp-tm-dev mailing list
> > > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > 
> > > > > > > 
> > > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > >
> > ******************************************
> > > > > > > 
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > >
> > _______________________________________________
> > > > > > dsdp-tm-dev mailing list
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > 
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: sshTimeout.gif
> > > > > Type: image/gif
> > > > > Size: 13796 bytes
> > > > > Desc: sshTimeout.gif
> > > > > Url : 
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > s/20090917/6db77751/sshTimeout.gif
> > > > > 
> > > > > ------------------------------
> > > > > 
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > 
> > > > > 
> > > > > End of dsdp-tm-dev Digest, Vol 50, Issue 2
> > > > > ******************************************
> > > > > 
> > > > 
> > > > 
> > > >       
> > > > 
> > > > 
> > > > ------------------------------
> > > > 
> > > > Message: 2
> > > > Date: Thu, 17 Sep 2009 16:52:12 +0200
> > > > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > > > Subject: RE: [dsdp-tm-dev] Re: dsdp-tm-dev
> > Digest, Vol 50,
> > > > Issue 2
> > > > To: "Target Management developer discussions"
> > > >     <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Message-ID:
> > > >     
> > > 
> <460801A4097E3D4CA04CC64EE64858480ADD8D81@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain;   
> > > > charset="iso-8859-1"
> > > > 
> > > > Oh.
> > > > 
> > > > So you are not talking about timeout. You are
> > talking
> > > > about
> > > > keepalive. Your server seems to disconnect your
> > connection
> > > > after 5 minutes of inactivity. So you want RSE to
> > send a 
> > > > keepalive ever "less than 5 minutes".
> > > > 
> > > > Incidentally, the default for timeout is 300 sec
> > == 5 min.
> > > > Perhaps you want to reduce it.
> > > > 
> > > > Cheers,
> > > > --
> > > > Martin Oberhuber, Senior Member of Technical
> > Staff, Wind
> > > > River
> > > > Target Management Project Lead, DSDP PMC Member
> > > > http://www.eclipse.org/dsdp/tm
> > > >  
> > > >  
> > > > 
> > > > > -----Original Message-----
> > > > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > 
> > > > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > > > On Behalf Of vrushali babar
> > > > > Sent: Thursday, September 17, 2009 2:41 PM
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev
> > Digest, Vol 50,
> > > > Issue 2
> > > > > 
> > > > > Hi Martin,
> > > > > 
> > > > > Thanks for your reply.
> > > > > I can SSH to remote server by using RSE and
> > even by
> > > > command line.
> > > > > In case of command line, even if I leave my
> > machine
> > > > idle for 
> > > > > 3-4 hours, my connection remains as it is.
> > > > > But in case of RSE, even if I leave my
> > machine idle
> > > > for 5 
> > > > > mins, whatever connections I've made, I need
> > to
> > > > reconnect to 
> > > > > all of them. 
> > > > > 
> > > > > To make connection I'm using following code
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > private void connect(final ISubSystem
> > subsys, final 
> > > > > IProgressMonitor monitor) {
> > > > >         //
> > > > monitor.beginTask("Connecting", 10);
> > > > >     if (!subsys.isConnected()) {
> > > > >     final Exception[] exception = new
> > > > Exception[1];
> > > > >         exception[0] =
> > > > null;
> > > > >        
> > > > Display.getDefault().syncExec(new Runnable() {
> > > > >         public void
> > > > run() {
> > > > >         try {
> > > > >         ((SubSystem)
> > > > subsys).promptForPassword();
> > > > >         } catch
> > > > (Exception e) {
> > > > >        
> > > >     exception[0] = e;
> > > > >         }
> > > > >         }
> > > > >     });
> > > > >     try {   
> > > >             
> > > > >        
> > > > subsys.getConnectorService().connect(monitor);
> > > > >     } catch (Exception e) {
> > > > >     e.printStackTrace();
> > > > >     }
> > > > >     if (subsys.isConnected()) {
> > > > >     // Notify connect status change
> > > > >     Display.getDefault().asyncExec(new
> > > > Runnable() {
> > > > >     public void run() {
> > > > >     IPropertySet ps[] = 
> > > > >
> > subsys.getConnectorService().getPropertySets();
> > > > >     for(int i=0
> > > > ;i<ps.length;i++)       
> > > >         
> > > > >     System.out.println(i+1 + "\tName" +
> > > > ps[i].getName());
> > > > >        
> > > >            
> > > >     //ps[0].
> > > > >        
> > > >            
> > > >     
> > > > > RSECorePlugin.getTheSystemRegistry()
> > > > >        
> > > >            
> > > >             
> > > > > .connectedStatusChange(subsys, true,
> > false);
> > > > >     }
> > > > >     });
> > > > >          }
> > > > >        }
> > > > >         //
> > > > monitor.done();
> > > > > }
> > > > > 
> > > > > 
> > > > > With the above code I can work well if I'm
> > not leaving
> > > > 
> > > > > Eclipse instance idle even for 2 mins. But
> > otherwise I
> > > > need 
> > > > > to reconnect.
> > > > > Please suggest if I'm going somewhere wrong
> > or if I
> > > > need to 
> > > > > do anything different. 
> > > > > 
> > > > > Stuck badly. 
> > > > > 
> > > > > Thanks a lot in advance,
> > > > > Vrushali.
> > > > > 
> > > > > 
> > > > > 
> > > > > --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > 
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > wrote:
> > > > > 
> > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > 
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > Subject: dsdp-tm-dev Digest, Vol 50,
> > Issue 2
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Date: Thursday, September 17, 2009,
> > 3:50 PM
> > > > > > Send dsdp-tm-dev mailing list
> > > > > > submissions to
> > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > 
> > > > > > To subscribe or unsubscribe via the
> > World Wide
> > > > Web, visit
> > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > or, via email, send a message with
> > subject or
> > > > body 'help'
> > > > > > to
> > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > 
> > > > > > You can reach the person managing the
> > list at
> > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > 
> > > > > > When replying, please edit your Subject
> > line so
> > > > it is more
> > > > > > specific
> > > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > > > 
> > > > > > 
> > > > > > Today's Topics:
> > > > > > 
> > > > > >    1. Re: dsdp-tm-dev Digest, Vol
> > 50, Issue
> > > > > > 1 (vrushali babar)
> > > > > >    2. Re: Connection timed out
> > > > > > error...RSEG1058 (vrushali babar)
> > > > > >    3. RE: Re: Connection timed out
> > > > > > error...RSEG1058 (Oberhuber, Martin)
> > > > > > 
> > > > > > 
> > > > > > 
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > 
> > > > > > Message: 1
> > > > > > Date: Wed, 16 Sep 2009 21:29:22 -0700
> > (PDT)
> > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev
> > Digest,
> > > > Vol 50,
> > > > > > Issue 1
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Message-ID: <327503.2668.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset=iso-8859-1
> > > > > > 
> > > > > > 
> > > > > > Hi David,
> > > > > > 
> > > > > > I'm using SSH option to make
> > connection. is there
> > > > any
> > > > > > method by which i can extend the
> > connection
> > > > timeout range?
> > > > > > 
> > > > > > Thanks,
> > > > > > Vrushali.
> > > > > > 
> > > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > wrote:
> > > > > > 
> > > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > > Subject: dsdp-tm-dev Digest, Vol
> > 50, Issue
> > > > 1
> > > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > Date: Wednesday, September 16,
> > 2009, 9:30
> > > > PM
> > > > > > > Send dsdp-tm-dev mailing list
> > > > > > > submissions to
> > > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > 
> > > > > > > To subscribe or unsubscribe via
> > the World
> > > > Wide Web,
> > > > > > visit
> > > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > or, via email, send a message with
> > subject
> > > > or body
> > > > > > 'help'
> > > > > > > to
> > > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > > 
> > > > > > > You can reach the person managing
> > the list
> > > > at
> > > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > > 
> > > > > > > When replying, please edit your
> > Subject line
> > > > so it is
> > > > > > more
> > > > > > > specific
> > > > > > > than "Re: Contents of dsdp-tm-dev
> > > > digest..."
> > > > > > > 
> > > > > > > 
> > > > > > > Today's Topics:
> > > > > > > 
> > > > > > >    1. Connection timed out
> > > > error...RSEG1058
> > > > > > > (vrushali babar)
> > > > > > >    2. Re: Connection timed out
> > > > > > > error...RSEG1058 (David McKnight)
> > > > > > > 
> > > > > > > 
> > > > > > >
> > > > > > 
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > > 
> > > > > > > Message: 1
> > > > > > > Date: Tue, 15 Sep 2009 22:21:40
> > -0700 (PDT)
> > > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > > Subject: [dsdp-tm-dev] Connection
> > timed out
> > > > > > > error...RSEG1058
> > > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > > > 
> > > > > > > Hi,
> > > > > > > 
> > > > > > > I'm using RSE-SDK-3.1 and Eclipse
> > 3.5. I
> > > > could make
> > > > > > > connection to remote server
> > programmatically
> > > > but
> > > > > > suffering
> > > > > > > from connection timed out error
> > RSEG1058,
> > > > saying
> > > > > > 'Connect to
> > > > > > > Remote_server_name was
> > cancelled'.
> > > > > > > 
> > > > > > > I tried setting Connection timeout
> > using
> > > > Preference
> > > > > > page
> > > > > > > (Windows -> Preferences ->
> > Remote
> > > > Systems ->
> > > > > > Data
> > > > > > > Store) by setting the value to
> > 64800000 but
> > > > still
> > > > > > doesn't
> > > > > > > seemed to be solving my problem. 
> > > > > > > Even after making the change in
> > connection
> > > > timeout
> > > > > > range,
> > > > > > > i'm getting disconnected with the
> > very short
> > > > period
> > > > > > of
> > > > > > > time.
> > > > > > > 
> > > > > > > So I am in need of some way to
> > set
> > > > connection timeout
> > > > > > when
> > > > > > > I'm connecting to remote server.
> > Please
> > > > provide
> > > > > > pointers and
> > > > > > > even anyone could tell me what is
> > the
> > > > default
> > > > > > timeout?
> > > > > > > 
> > > > > > > Thanks in advance,
> > > > > > > Vrushali.
> > > > > > > 
> > > > > > > 
> > > > > > >       
> > > > > > > 
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > > Message: 2
> > > > > > > Date: Wed, 16 Sep 2009 06:29:23
> > -0400
> > > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > > Subject: Re: [dsdp-tm-dev]
> > Connection timed
> > > > out
> > > > > > > error...RSEG1058
> > > > > > > To: Target Management developer
> > discussions
> > > > 
> > > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > > Message-ID:
> > > > > > >     
> > > > > 
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > > > charset="us-ascii"
> > > > > > > 
> > > > > > > Skipped content of type
> > > > > > multipart/alternative--------------
> > > > > > > next part --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: graycol.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 105 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/graycol.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: pic26832.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 1255 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/pic26832.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: ecblank.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 45 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/ecblank.gif
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > >
> > > > _______________________________________________
> > > > > > > dsdp-tm-dev mailing list
> > > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > 
> > > > > > > 
> > > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > >
> > ******************************************
> > > > > > > 
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > > 
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > > Message: 2
> > > > > > Date: Thu, 17 Sep 2009 00:09:05 -0700
> > (PDT)
> > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > Subject: [dsdp-tm-dev] Re: Connection
> > timed out
> > > > > > error...RSEG1058
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Message-ID: <113449.25932.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset=iso-8859-1
> > > > > > 
> > > > > > 
> > > > > > Hi David,
> > > > > > 
> > > > > > I'm trying to SSH connection. Looked
> > for any
> > > > manual setting
> > > > > > available to set connection time out
> > range but
> > > > didn't find
> > > > > > anything (Whatever I got was for
> > Dstore).
> > > > > > While searching, i came across the
> > following bug
> > > > id
> > > > > > 
> > > > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > > > > 
> > > > > > so looks like there is some solution
> > available. 
> > > > > > Till now i have finished following 
> > > > > > - getting instance if IHost
> > > > > > - getting related ISubsystem
> > > > > > - Getting credentials if not yet
> > provided and
> > > > connecting to
> > > > > > remote server
> > > > > > 
> > > > > > but stuck at connection time out
> > error.
> > > > > > Can you suggest if there is any method
> > to set
> > > > connection
> > > > > > time out?
> > > > > > Help would be really grateful.
> > > > > > 
> > > > > > Thanks a ton,
> > > > > > Vrushali.
> > > > > > 
> > > > > > 
> > > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > wrote:
> > > > > > 
> > > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > > Subject: dsdp-tm-dev Digest, Vol
> > 50, Issue
> > > > 1
> > > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > Date: Wednesday, September 16,
> > 2009, 9:30
> > > > PM
> > > > > > > Send dsdp-tm-dev mailing list
> > > > > > > submissions to
> > > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > 
> > > > > > > To subscribe or unsubscribe via
> > the World
> > > > Wide Web,
> > > > > > visit
> > > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > or, via email, send a message with
> > subject
> > > > or body
> > > > > > 'help'
> > > > > > > to
> > > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > > 
> > > > > > > You can reach the person managing
> > the list
> > > > at
> > > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > > 
> > > > > > > When replying, please edit your
> > Subject line
> > > > so it is
> > > > > > more
> > > > > > > specific
> > > > > > > than "Re: Contents of dsdp-tm-dev
> > > > digest..."
> > > > > > > 
> > > > > > > 
> > > > > > > Today's Topics:
> > > > > > > 
> > > > > > >    1. Connection timed out
> > > > error...RSEG1058
> > > > > > > (vrushali babar)
> > > > > > >    2. Re: Connection timed out
> > > > > > > error...RSEG1058 (David McKnight)
> > > > > > > 
> > > > > > > 
> > > > > > >
> > > > > > 
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > > 
> > > > > > > Message: 1
> > > > > > > Date: Tue, 15 Sep 2009 22:21:40
> > -0700 (PDT)
> > > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > > Subject: [dsdp-tm-dev] Connection
> > timed out
> > > > > > > error...RSEG1058
> > > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > > > 
> > > > > > > Hi,
> > > > > > > 
> > > > > > > I'm using RSE-SDK-3.1 and Eclipse
> > 3.5. I
> > > > could make
> > > > > > > connection to remote server
> > programmatically
> > > > but
> > > > > > suffering
> > > > > > > from connection timed out error
> > RSEG1058,
> > > > saying
> > > > > > 'Connect to
> > > > > > > Remote_server_name was
> > cancelled'.
> > > > > > > 
> > > > > > > I tried setting Connection timeout
> > using
> > > > Preference
> > > > > > page
> > > > > > > (Windows -> Preferences ->
> > Remote
> > > > Systems ->
> > > > > > Data
> > > > > > > Store) by setting the value to
> > 64800000 but
> > > > still
> > > > > > doesn't
> > > > > > > seemed to be solving my problem. 
> > > > > > > Even after making the change in
> > connection
> > > > timeout
> > > > > > range,
> > > > > > > i'm getting disconnected with the
> > very short
> > > > period
> > > > > > of
> > > > > > > time.
> > > > > > > 
> > > > > > > So I am in need of some way to
> > set
> > > > connection timeout
> > > > > > when
> > > > > > > I'm connecting to remote server.
> > Please
> > > > provide
> > > > > > pointers and
> > > > > > > even anyone could tell me what is
> > the
> > > > default
> > > > > > timeout?
> > > > > > > 
> > > > > > > Thanks in advance,
> > > > > > > Vrushali.
> > > > > > > 
> > > > > > > 
> > > > > > >       
> > > > > > > 
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > > Message: 2
> > > > > > > Date: Wed, 16 Sep 2009 06:29:23
> > -0400
> > > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > > Subject: Re: [dsdp-tm-dev]
> > Connection timed
> > > > out
> > > > > > > error...RSEG1058
> > > > > > > To: Target Management developer
> > discussions
> > > > 
> > > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > > Message-ID:
> > > > > > >     
> > > > > 
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > > Content-Type: text/plain;
> > > > charset="us-ascii"
> > > > > > > 
> > > > > > > Skipped content of type
> > > > > > multipart/alternative--------------
> > > > > > > next part --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: graycol.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 105 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/graycol.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: pic26832.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 1255 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/pic26832.gif
> > > > > > > -------------- next part
> > --------------
> > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > Name: ecblank.gif
> > > > > > > Type: image/gif
> > > > > > > Size: 45 bytes
> > > > > > > Desc: not available
> > > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/ecblank.gif
> > > > > > > 
> > > > > > > ------------------------------
> > > > > > > 
> > > > > > >
> > > > _______________________________________________
> > > > > > > dsdp-tm-dev mailing list
> > > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > 
> > > > > > > 
> > > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > >
> > ******************************************
> > > > > > > 
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > > 
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > > Message: 3
> > > > > > Date: Thu, 17 Sep 2009 12:19:41 +0200
> > > > > > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > > > > > Subject: RE: [dsdp-tm-dev] Re:
> > Connection timed
> > > > out
> > > > > > error...RSEG1058
> > > > > > To: "Target Management developer
> > discussions"
> > > > > >     <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Message-ID:
> > > > > >     
> > > > > 
> > > 
> <460801A4097E3D4CA04CC64EE64858480ADD8C80@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset="iso-8859-1"
> > > > > > 
> > > > > > Vrushali,
> > > > > > 
> > > > > > I doubt that you really have a timeout
> > problem.
> > > > > > 
> > > > > > Can you connect your host with some
> > commandline
> > > > tool
> > > > > > outside
> > > > > > Eclipse? Is sftp-server available on
> > your remote
> > > > host?
> > > > > > 
> > > > > > I suggest that you try the TM-Terminal
> > to connect
> > > > to your
> > > > > > host.
> > > > > > This just needs a shell and no
> > sftp-server -- and
> > > > allows
> > > > > > setting
> > > > > > a timeout value directly in its UI.
> > > > > > 
> > > > > > RSE also allows setting a timeout value
> > in the
> > > > connection
> > > > > > wizard
> > > > > > or connection properties, see
> > attached.
> > > > > > 
> > > > > > Cheers,
> > > > > > --
> > > > > > Martin Oberhuber, Senior Member of
> > Technical
> > > > Staff, Wind
> > > > > > River
> > > > > > Target Management Project Lead, DSDP
> > PMC Member
> > > > > > http://www.eclipse.org/dsdp/tm
> > > > > >  
> > > > > >  
> > > > > > 
> > > > > > > -----Original Message-----
> > > > > > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > 
> > > > > > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > > > > > On Behalf Of vrushali babar
> > > > > > > Sent: Thursday, September 17, 2009
> > 9:09 AM
> > > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > Subject: [dsdp-tm-dev] Re:
> > Connection timed
> > > > out
> > > > > > error...RSEG1058
> > > > > > > 
> > > > > > > 
> > > > > > > Hi David,
> > > > > > > 
> > > > > > > I'm trying to SSH connection.
> > Looked for any
> > > > manual
> > > > > > setting 
> > > > > > > available to set connection time
> > out range
> > > > but didn't
> > > > > > find 
> > > > > > > anything (Whatever I got was for
> > Dstore).
> > > > > > > While searching, i came across the
> > following
> > > > bug id
> > > > > > > 
> > > > > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > > > > > 
> > > > > > > so looks like there is some
> > solution
> > > > available. 
> > > > > > > Till now i have finished following
> > 
> > > > > > > - getting instance if IHost
> > > > > > > - getting related ISubsystem
> > > > > > > - Getting credentials if not yet
> > provided
> > > > and
> > > > > > connecting to 
> > > > > > > remote server
> > > > > > > 
> > > > > > > but stuck at connection time out
> > error.
> > > > > > > Can you suggest if there is any
> > method to
> > > > set
> > > > > > connection time out?
> > > > > > > Help would be really grateful.
> > > > > > > 
> > > > > > > Thanks a ton,
> > > > > > > Vrushali.
> > > > > > > 
> > > > > > > 
> > > > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > 
> > > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > wrote:
> > > > > > > 
> > > > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > 
> > > > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > > > Subject: dsdp-tm-dev Digest,
> > Vol 50,
> > > > Issue 1
> > > > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > > Date: Wednesday, September
> > 16, 2009,
> > > > 9:30 PM
> > > > > > > > Send dsdp-tm-dev mailing
> > list
> > > > > > > > submissions to
> > > > > > > >     dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > > 
> > > > > > > > To subscribe or unsubscribe
> > via the
> > > > World Wide
> > > > > > Web, visit
> > > > > > > >     https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > > or, via email, send a message
> > with
> > > > subject or
> > > > > > body 'help'
> > > > > > > > to
> > > > > > > >     dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > > > > 
> > > > > > > > You can reach the person
> > managing the
> > > > list at
> > > > > > > >     dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > > > > 
> > > > > > > > When replying, please edit
> > your Subject
> > > > line so
> > > > > > it is more
> > > > > > > > specific
> > > > > > > > than "Re: Contents of
> > dsdp-tm-dev
> > > > digest..."
> > > > > > > > 
> > > > > > > > 
> > > > > > > > Today's Topics:
> > > > > > > > 
> > > > > > > >    1. Connection timed
> > out
> > > > error...RSEG1058
> > > > > > > > (vrushali babar)
> > > > > > > >    2. Re: Connection timed
> > out
> > > > > > > > error...RSEG1058 (David
> > McKnight)
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > >
> > > > > > 
> > > > >
> > > > 
> > >
> > 
> ----------------------------------------------------------------------
> > > > > > > > 
> > > > > > > > Message: 1
> > > > > > > > Date: Tue, 15 Sep 2009
> > 22:21:40 -0700
> > > > (PDT)
> > > > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > > > Subject: [dsdp-tm-dev]
> > Connection timed
> > > > out
> > > > > > > > error...RSEG1058
> > > > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > > Message-ID: 
> <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > > > Content-Type: text/plain;
> > > > charset=us-ascii
> > > > > > > > 
> > > > > > > > Hi,
> > > > > > > > 
> > > > > > > > I'm using RSE-SDK-3.1 and
> > Eclipse 3.5.
> > > > I could
> > > > > > make
> > > > > > > > connection to remote server
> > > > programmatically but
> > > > > > suffering
> > > > > > > > from connection timed out
> > error
> > > > RSEG1058, saying
> > > > > > 'Connect to
> > > > > > > > Remote_server_name was
> > cancelled'.
> > > > > > > > 
> > > > > > > > I tried setting Connection
> > timeout
> > > > using
> > > > > > Preference page
> > > > > > > > (Windows -> Preferences
> > -> Remote
> > > > Systems
> > > > > > -> Data
> > > > > > > > Store) by setting the value
> > to 64800000
> > > > but still
> > > > > > doesn't
> > > > > > > > seemed to be solving my
> > problem. 
> > > > > > > > Even after making the change
> > in
> > > > connection
> > > > > > timeout range,
> > > > > > > > i'm getting disconnected with
> > the very
> > > > short
> > > > > > period of
> > > > > > > > time.
> > > > > > > > 
> > > > > > > > So I am in need of some way
> > to set
> > > > connection
> > > > > > timeout when
> > > > > > > > I'm connecting to remote
> > server. Please
> > > > provide
> > > > > > pointers and
> > > > > > > > even anyone could tell me
> > what is the
> > > > default
> > > > > > timeout?
> > > > > > > > 
> > > > > > > > Thanks in advance,
> > > > > > > > Vrushali.
> > > > > > > > 
> > > > > > > > 
> > > > > > > >       
> > > > > > > > 
> > > > > > > > 
> > > > > > > >
> > ------------------------------
> > > > > > > > 
> > > > > > > > Message: 2
> > > > > > > > Date: Wed, 16 Sep 2009
> > 06:29:23 -0400
> > > > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > > > Subject: Re: [dsdp-tm-dev]
> > Connection
> > > > timed out
> > > > > > > > error...RSEG1058
> > > > > > > > To: Target Management
> > developer
> > > > discussions 
> > > > > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > > > Message-ID:
> > > > > > > >     
> > > > > > > 
> > > > > 
> > > 
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > > > Content-Type: text/plain;
> > > > charset="us-ascii"
> > > > > > > > 
> > > > > > > > Skipped content of type
> > > > > > multipart/alternative--------------
> > > > > > > > next part --------------
> > > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > > Name: graycol.gif
> > > > > > > > Type: image/gif
> > > > > > > > Size: 105 bytes
> > > > > > > > Desc: not available
> > > > > > > > Url : 
> > > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > > s/20090916/602c221b/graycol.gif
> > > > > > > > -------------- next part
> > > > --------------
> > > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > > Name: pic26832.gif
> > > > > > > > Type: image/gif
> > > > > > > > Size: 1255 bytes
> > > > > > > > Desc: not available
> > > > > > > > Url : 
> > > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > > s/20090916/602c221b/pic26832.gif
> > > > > > > > -------------- next part
> > > > --------------
> > > > > > > > A non-text attachment was
> > scrubbed...
> > > > > > > > Name: ecblank.gif
> > > > > > > > Type: image/gif
> > > > > > > > Size: 45 bytes
> > > > > > > > Desc: not available
> > > > > > > > Url : 
> > > > > > > 
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > > > s/20090916/602c221b/ecblank.gif
> > > > > > > > 
> > > > > > > >
> > ------------------------------
> > > > > > > > 
> > > > > > > >
> > > > _______________________________________________
> > > > > > > > dsdp-tm-dev mailing list
> > > > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > > 
> > > > > > > > 
> > > > > > > > End of dsdp-tm-dev Digest,
> > Vol 50,
> > > > Issue 1
> > > > > > > >
> > > > ******************************************
> > > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > >       
> > > > > > >
> > > > _______________________________________________
> > > > > > > dsdp-tm-dev mailing list
> > > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > > 
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: sshTimeout.gif
> > > > > > Type: image/gif
> > > > > > Size: 13796 bytes
> > > > > > Desc: sshTimeout.gif
> > > > > > Url : 
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090917/6db77751/sshTimeout.gif
> > > > > > 
> > > > > > ------------------------------
> > > > > > 
> > > > > >
> > _______________________________________________
> > > > > > dsdp-tm-dev mailing list
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > 
> > > > > > 
> > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 2
> > > > > >
> > ******************************************
> > > > > > 
> > > > > 
> > > > > 
> > > > >       
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > 
> > > > 
> > > > 
> > > > ------------------------------
> > > > 
> > > > _______________________________________________
> > > > dsdp-tm-dev mailing list
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > 
> > > > 
> > > > End of dsdp-tm-dev Digest, Vol 50, Issue 3
> > > > ******************************************
> > > > 
> > > 
> > > 
> > >       
> > > 
> > 
> 
> 
>       
> 


Back to the top