[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
RE: [cdt-debug-dev] Re: Line breakpoint does not seem to work
|
I don't think this is the cause of the
problem with breakpoints. Eclipse handles the slashes correctly.
What do you want to map?
I think I find out the different. I used a batch command file to compile my
project. options are identical to eclipse make file. only difference is the
system path: e.g. gcc './src/main.c' in eclipse and gcc .\src\main.c in batch
file.
How could I change the system path mapping?
windows->preference->c/c++->debug->common source lookup paht and
then how??
Thanks for your help, Mikhail
Best regards,
On 12/7/06, Mikhail Khodjaiants <Mikhail.Khodjaiants@xxxxxxx>
wrote:
What do you mean by a batch build? And I suspect that Zylin's
version is using a modification
of CDT.
In workspace. Again: source lookup works fine; the batch compile options
are identical with the eclipse project properties ( only diff:
-MMD,-MP);
I think eclipse must have some recognition mechanism to include
source files to debug session, just dont know how.
Could you check it out yourself with a helloworld batch build
managed c project, I will be surprised if you result is different than
mine.
Since I am doing remote debug, hope i could provide you my test project,
but wouldn't help you see the problem.Sorry for the inconvenience.
Thanks a lot.
On 12/6/06,
Mikhail Khodjaiants <
Mikhail.Khodjaiants@xxxxxxx
> wrote:
Where
are the source files? In the project or outside of the
workspace?
HI Mikhail
I found out the hello world project works if with default build, but
not with external build batch.
Any suggestion then?
On 12/5/06,
Mikhail Khodjaiants <
Mikhail.Khodjaiants@xxxxxxx
> wrote:
Create a
simple managed build project - Hello World or something
like that and try it. If it works then the problem is with your project
structure.
If the source lookup fails entire source would not be shown, not just
breakpoint filtered out.
New launch didnt have any luck. I found that my test.exe file doesnot
locate in Debug (eclipse default) folder but outside, since I am using my
batch compile. Has this something to do with it?
I even created a new project, this time located in workspace, but
still not working.
How can i do further testing to check wether the main file is
attached to the debug session?
Best,
On 12/5/06,
Mikhail Khodjaiants <
Mikhail.Khodjaiants@xxxxxxx
> wrote:
This has
nothing to do with gdb if there is no "break-insert" in the gdb console.
If you can set the same breakpoint from the console then your executable
is compiled with the right options. The source lookup is the only
possible reason why the breakpoint is filtered. Try to create a new
launch configuration.
Thanks Mikhail
I checked the souce lookup, by default it contained the src folder
I have together with my include folder inc, as well as the cgwin path
mapping and anything should be alright.
What else could be the reason since the suorce lookup were
correct?
When starting debug the main program still be the first breakpoint,
shouldnt that mean GDB recognise the source file, but as you
said, somehow excluded from the debug
session/target?
Thanks
On 12/5/06,
Mikhail Khodjaiants
<
Mikhail.Khodjaiants@xxxxxxx
> wrote:
When a
launch configuration is created it adds the project and the
referenced projects to the source lookup. Look at the "Source" tab of
your launch configuration.
Hi Mikhail
How would I "include" my main c file into the debug
session? I assumed the debuger would recognise it automatically. or
should it be done via a compiler option in my batch complie? The older
version didnt need me to do anything but it works.
During debug in the bp properties the filter is not checked.It
did not even if I checked the filter.
Could you give further hints?
Many thanks
On 12/5/06,
Mikhail Khodjaiants
<
Mikhail.Khodjaiants@xxxxxxx
> wrote:
The
check mark on the breakpoint image means that the breakpoint is set
on the target. In your case the breakpoint is not set that's why it
doesn't have a check mark.
The
CDT debugger filters the existing breakpoints before trying to set
them. The filter is using the source lookup to check if the
breakpoint is set in the source file that "belongs" to the debug
session. I suspect this is the reason why your breakpoint is not
getting set.
I found further out that the breakpoint I set would not be
ticked in front of the breakpoint dot.
What can that be meaning?
Thanks,
On 12/5/06,
Haoquan JIANG <
haoquan.jiang@xxxxxxxxx>
wrote:
Hi Mikhail,
The break-insert is not issued for Eclipse source line by
double click, though the bp monitor has its entry. However, gdb
console break XXX works fine.
Could you understand where the problem
is?
Set the verbose console mode and check if the
"break-insert" command is being issued for you
breakpoint.
Hello all,
I am using zylin embededcdt with cdt version 3.1.0.20060407
and a mips-elf gdb for embeded debug.
Anyhow, the line breakpoint (I mean source file
line breakpoint click) would not be set via gdb(
one can see from the gdb console by "info break", no entry
was made when line break inserted) and therefore not hit.
Could some one point out where this failure can lie in? I
had a old version of micro code to my processor, where line
breakpoints functioned correctly. Just after I use my
new(complete different) micro code, which might have used a
little different complied settings(-g, everything i think that
would matter stays), I found the dissasmbly is not quite in
order than what I expected. Could that be the problem? If yes,
how can I change the settings to make dissasmbly accord to
the source file?
Thanks for the help,
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12.
c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The
contents of this email and any attachments are confidential and
may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store
or copy the information in any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12.
c/o NIT
21073 Hamburg
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents
of this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other
person, use it for any purpose, or store or copy the information in
any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents
of this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other
person, use it for any purpose, or store or copy the information in
any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of
this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other person,
use it for any purpose, or store or copy the information in any
medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of
this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other person,
use it for any purpose, or store or copy the information in any
medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse
12. c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this
email and any attachments are confidential and may also be privileged. If
you are not the intended recipient, please notify the sender immediately and
do not disclose the contents to any other person, use it for any purpose, or
store or copy the information in any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse
12. c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this
email and any attachments are confidential and may also be privileged. If you
are not the intended recipient, please notify the sender immediately and do
not disclose the contents to any other person, use it for any purpose, or
store or copy the information in any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12.
c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.