[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
RE: [cdt-debug-dev] Re: Line breakpoint does not seem to work
|
Where are the source files? In the project or outside
of the workspace?
HI Mikhail
I found out the hello world project works if with default build, but not
with external build batch.
Any suggestion then?
On 12/5/06, Mikhail Khodjaiants <Mikhail.Khodjaiants@xxxxxxx>
wrote:
Create a simple managed build project - Hello World or
something like that and try it. If it works then the problem is with your
project structure.
If the source lookup fails entire source would not be shown, not just
breakpoint filtered out.
New launch didnt have any luck. I found that my test.exe file doesnot
locate in Debug (eclipse default) folder but outside, since I am using my
batch compile. Has this something to do with it?
I even created a new project, this time located in workspace, but still
not working.
How can i do further testing to check wether the main file is attached to
the debug session?
Best,
On 12/5/06, Mikhail Khodjaiants <Mikhail.Khodjaiants@xxxxxxx
> wrote:
This has nothing to do with gdb if there is no "break-insert" in the
gdb console. If you can set the same breakpoint from the console then your
executable is compiled with the right options. The source lookup is the only
possible reason why the breakpoint is filtered. Try to create a new launch
configuration.
Thanks Mikhail
I checked the souce lookup, by default it contained the src folder I
have together with my include folder inc, as well as the cgwin path mapping
and anything should be alright.
What else could be the reason since the suorce lookup were
correct?
When starting debug the main program still be the first breakpoint,
shouldnt that mean GDB recognise the source file, but as you said,
somehow excluded from the debug session/target?
Thanks
On 12/5/06,
Mikhail Khodjaiants <
Mikhail.Khodjaiants@xxxxxxx
> wrote:
When a
launch configuration is created it adds the project and the
referenced projects to the source lookup. Look at the "Source" tab of your
launch configuration.
Hi Mikhail
How would I "include" my main c file into the debug session? I
assumed the debuger would recognise it automatically. or should it be done
via a compiler option in my batch complie? The older version didnt need me
to do anything but it works.
During debug in the bp properties the filter is not checked.It did
not even if I checked the filter.
Could you give further hints?
Many thanks
On 12/5/06,
Mikhail Khodjaiants <
Mikhail.Khodjaiants@xxxxxxx
> wrote:
The check
mark on the breakpoint image means that the breakpoint is set on the
target. In your case the breakpoint is not set that's why it doesn't
have a check mark.
The CDT
debugger filters the existing breakpoints before trying to set them. The
filter is using the source lookup to check if the breakpoint is set
in the source file that "belongs" to the debug session. I suspect this
is the reason why your breakpoint is not getting set.
I found further out that the breakpoint I set would not be ticked
in front of the breakpoint dot.
What can that be meaning?
Thanks,
On 12/5/06,
Haoquan JIANG <
haoquan.jiang@xxxxxxxxx>
wrote:
Hi Mikhail,
The break-insert is not issued for Eclipse source line by double
click, though the bp monitor has its entry. However, gdb console break
XXX works fine.
Could you understand where the problem is?
Set
the verbose console mode and check if the "break-insert" command is
being issued for you breakpoint.
Hello all,
I am using zylin embededcdt with cdt version 3.1.0.20060407 and
a mips-elf gdb for embeded debug.
Anyhow, the line breakpoint (I mean source file
line breakpoint click) would not be set via gdb( one
can see from the gdb console by "info break", no entry was made
when line break inserted) and therefore not hit.
Could some one point out where this failure can lie in? I had a
old version of micro code to my processor, where line breakpoints
functioned correctly. Just after I use my new(complete different)
micro code, which might have used a little different complied
settings(-g, everything i think that would matter stays), I found
the dissasmbly is not quite in order than what I expected. Could
that be the problem? If yes, how can I change the settings to
make dissasmbly accord to the source file?
Thanks for the help,
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents
of this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other
person, use it for any purpose, or store or copy the information in
any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of
this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other person,
use it for any purpose, or store or copy the information in any
medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of
this email and any attachments are confidential and may also be
privileged. If you are not the intended recipient, please notify the
sender immediately and do not disclose the contents to any other person,
use it for any purpose, or store or copy the information in any
medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse
12. c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this
email and any attachments are confidential and may also be privileged. If
you are not the intended recipient, please notify the sender immediately and
do not disclose the contents to any other person, use it for any purpose, or
store or copy the information in any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12. c/o
NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this
email and any attachments are confidential and may also be privileged. If you
are not the intended recipient, please notify the sender immediately and do
not disclose the contents to any other person, use it for any purpose, or
store or copy the information in any medium. Thank you.
_______________________________________________
cdt-debug-dev
mailing list
cdt-debug-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cdt-debug-dev
--
Jiang,Haoquan
Apartment.4.20
Kassernenstrasse 12.
c/o NIT
21073 Hamburg
--
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.