[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
RE: [aspectj-users] [newbie] General help needed here.....
|
Yes Wes, it is true that using the declaring type in the signature is useful and can be appropriate for those who have some experience with AspectJ. However, for new users it's helpful to get in the mindset of using this to specify types instead of doing it in the method signature, instead of trying to remember that using declaring types with call is problematic and using them with execution is ok (remember that Jerry started off using call with a static type in the signature!) And it is also a good rule because it's binding the currently executing object in your pointcut is commonly done.
By the way, this(Type) && execution(...) has *no* dynamic test (+), and with the AspectJ 1.2 compiler optimizations should be compiled about equally quickly (e.g., slide 96 from Andy Clement's data at http://newaspects.com/presentations/Enterprise%20AOP%20AOSD%202004.ppt which shows some related improvements, although not the performance of this(..) && execution(..)).
It is true that it's not statically resolvable for declare warning/error (although I'd like to see the compiler restriction eased to allow use pointcuts for any special cases where no dynamic test would be required to resolve a pointcut; maybe some day). And it also isn't useful for statics (clearly). But these are specialized scenarios, not the general rule.
Re: configuring AspectJ with Struts, the aTrack project is a working example that uses Struts with AspectJ.
Ron
(+) See section 4.1.2 in "Advice Weaving in AspectJ" http://www.hugunin.net/papers/aosd-2004-cameraReady.pdf. Also I compiled two versions of an aspect with AspectJ 1.2 and found identical bytecode:
public aspect ExecBytecode {
void foo() {}
before() : this(ExecBytecode) && execution(* foo()) {}
}
Then from "javap -c ExecBytecode"
foo();
Code:
0: invokestatic #49; //Method aspectOf:()LExecBytecode;
3: invokevirtual #51; //Method ajc$before$ExecBytecode$1$eb4dac00:()V
6: return
public void ajc$before$ExecBytecode$1$eb4dac00();
Code:
0: return
public aspect ExecBytecode {
void foo() {}
before() : execution(* ExecBytecode.foo()) {}
}
Produces:
void foo();
Code:
0: invokestatic #49; //Method aspectOf:()LExecBytecode;
3: invokevirtual #51; //Method ajc$before$ExecBytecode$1$b5db75e4:()V
6: return
public void ajc$before$ExecBytecode$1$b5db75e4();
Code:
0: return
Ron Bodkin
Chief Technology Officer
New Aspects of Software
o: (415) 824-4690
m: (415) 509-2895
> ------------Original Message------------
> From: "Wes Isberg" <wes@xxxxxxxxxxxxxx>
> To: aspectj-users@xxxxxxxxxxx
> Date: Fri, Jul-16-2004 11:06 PM
> Subject: RE: [aspectj-users] [newbie] General help needed here.....
>
> Hi Ron (, Jerry) -
>
> re:
> > As a general rule, you probably don't want to use the form of
> signature
> > you have in that pointcut (which matches based on static types
> instead
> > of runtime instances).
>
> I've never heard this rule and I believe it is not correct;
> The original form
>
> execution(ReturnType DeclaringType.methodName(..))
>
> is better than
>
> execution(ReturnType methodName(..)) && this(DeclaringType)
>
> *because* it can be resolved staticly and requires no dynamic test
> (faster compile, faster implementation, and better IDE support).
>
> You might be confusing this situation with the suggestion for
> the call pointcut not to use the declaring type in the call.
> This suggestion is because the signature of a call join point
> refers to the type of the reference (at the call site), not the
> type of the referent class (at run time). So when people
> write
>
> call(ReturnType DeclaringType.methodName(..))
>
> they usually mean
>
> call(ReturnType methodName(..)) && target(DeclaringType)
>
> (hence the suggestion).
>
> Wes
>
> P.S. - If someone does figure out how to configure AspectJ
> with Struts, etc, it would be great to contribute back a
> description to the mailing list or a bug, for inclusion in
> the sample code repository...
>
>
> > ------------Original Message------------
> > From: "Ron Bodkin" <rbodkin@xxxxxxxxxxxxxx>
> > To: aspectj-users@xxxxxxxxxxx
> > Date: Fri, Jul-16-2004 4:09 PM
> > Subject: RE: [aspectj-users] [newbie] General help needed here.....
> >
> > Jerry,
> >
> > A couple of things to try:
> > 1) Make sure that you are opening the affected file with the AspectJ
> > editor and not the Java editor. You should go into window |
> preferences |
> > file associations and make sure that AspectJ is set the the default
> for
> > .java files
> > 2) Try adding this line, to see if the pointcut is matching:
> >
> > declare warning: actionCall() : "in action execution";
> >
> > As a general rule, you probably don't want to use the form of
> signature
> > you have in that pointcut (which matches based on static types
> instead
> > of runtime instances). It should work for executions, but a better
> > version is:
> >
> > pointcut actionExecute() : execution(public ActionForward
> > execute(ActionMapping, ActionForm,
> > HttpServletRequest, HttpServletResponse))) && this(Logon_Action);
> >
> > Ron
> >
> > p.s. there's an already defined, debugged version of a pointcut for
> > struts action execution in the aTrack project: see
> > ajee.component.StrutsPointcuts. aTrack is at
> https://atrack.dev.java.net/
> >
> > public pointcut actionExecute(Action action, ActionMapping
> mapping,
> > ActionForm form,
> > HttpServletRequest request, HttpServletResponse response) :
> > execution(ActionForward Action.execute(ActionMapping,
> > ActionForm,
> > HttpServletRequest, HttpServletResponse)) && this(action)
>
> > &&
> > args(mapping, form, request, response);
> >
> >
> > Ron Bodkin
> > Chief Technology Officer
> > New Aspects of Software
> > o: (415) 824-4690
> > m: (415) 509-2895
> >
> > > ------------Original Message------------
> > > From: "Jerry Jalenak" <Jerry.Jalenak@xxxxxxxxxx>
> > > To: "'aspectj-users@xxxxxxxxxxx'" <aspectj-users@xxxxxxxxxxx>
> > > Date: Fri, Jul-16-2004 1:07 PM
> > > Subject: RE: [aspectj-users] [newbie] General help needed here.....
> > >
> > > Another possibility that just occurred to me....
> > >
> > > Since Logon_Action extends Action, do I need to 'expose' the
> > > org.apache.struts.action.Action class to the aspect?
> > >
> > > Jerry Jalenak
> > > Development Manager, Web Publishing
> > > LabOne, Inc.
> > > 10101 Renner Blvd.
> > > Lenexa, KS 66219
> > > (913) 577-1496
> > >
> > > jerry.jalenak@xxxxxxxxxx
> > >
> > >
> > > > -----Original Message-----
> > > > From: Ramnivas Laddad [mailto:ramnivas@xxxxxxxxxxxxxxx]
> > > > Sent: Friday, July 16, 2004 2:29 PM
> > > > To: aspectj-users@xxxxxxxxxxx
> > > > Subject: Re: [aspectj-users] [newbie] General help needed
> here.....
> > > >
> > > >
> > > > Hi Jerry,
> > > >
> > > > Otávio's suggestion of using execution() PCD is the right one.
> > > >
> > > > It is okay to use any number of aspects crosscutting a class.
> > > > Just a guess: Do you have every referred type in the pointcut
> > > > definition (in your case ActionMapping, ActionForm,
> > > > HttpServletRequest, HttpServletResponse) appropriately imported.
> > > >
> > > > -Ramnivas
> > > >
> > > > ===
> > > >
> > > > Ramnivas Laddad,
> > > > Author, AspectJ in Action
> > > > http://ramnivas.com
> > > >
> > > > Jerry Jalenak wrote:
> > > >
> > > > >Otavio,
> > > > >
> > > > >Thanks for the reply. Change the PCD from call to execution
> > > > didn't seem to
> > > > >change anything. However, I starting to think I have
> > > > something else wrong.
> > > > >In the AspectJ Visualizer perspective, I am only seeing
> > > > where one aspect has
> > > > >been applied (I have two). Is it not possible to have more
> > > > than one aspect
> > > > >class?
> > > > >
> > > > >Thanks....
> > > > >
> > > > >Jerry Jalenak
> > > > >Development Manager, Web Publishing
> > > > >LabOne, Inc.
> > > > >10101 Renner Blvd.
> > > > >Lenexa, KS 66219
> > > > >(913) 577-1496
> > > > >
> > > > >jerry.jalenak@xxxxxxxxxx
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >>-----Original Message-----
> > > > >>From: Otávio Augusto Lazzarini Lemos [mailto:oall@xxxxxxxxxxx]
> > > > >>Sent: Friday, July 16, 2004 1:31 PM
> > > > >>To: aspectj-users@xxxxxxxxxxx
> > > > >>Subject: Re: [aspectj-users] [newbie] General help needed
> > here.....
> > > > >>
> > > > >>
> > > > >>You should use an execution PCD. In your example the calls to
> > > > >>Logon_action.execute(ActionMapping, ActionForm,
> > HttpServletRequest,
> > > > >>
> > > > >>
> > > > >>>HttpServletResponse) are the intercepted join points, and
> > > > >>>
> > > > >>>
> > > > >>not the actual
> > > > >>execution of the method (try to look at the places where you
> > > > >>call the method).
> > > > >>Tell me if it works with the execution instead of the call PCD.
> > > > >>
> > > > >>Otávio
> > > > >>
> > > > >>Citando Jerry Jalenak <Jerry.Jalenak@xxxxxxxxxx>:
> > > > >>
> > > > >>
> > > > >>
> > > > >>>First, thanks to Rod, Adrian, and Ramnivas for their help
> > > > >>>
> > > > >>>
> > > > >>the other day. I
> > > > >>
> > > > >>
> > > > >>>think I'm starting to get the hang of this....
> > > > >>>
> > > > >>>That being said, I'm stuck as to why the following doesn't
> > > > >>>
> > > > >>>
> > > > >>work. I've just
> > > > >>
> > > > >>
> > > > >>>upgraded to the AJDT 1.1.11 plug-in, if it matters.
> > > > >>>
> > > > >>>Here's the aspect :
> > > > >>>
> > > > >>> public aspect MemberSolutions_BaseActionAspect
> > > > >>> {
> > > > >>> // ~ Pointcut definitions
> > > > >>>
> > > > >>> pointcut actionCall() :
> > > > >>> (call(public ActionForward
> > > > >>>Logon_Action.execute(ActionMapping, ActionForm,
> > > HttpServletRequest,
> > > > >>>HttpServletResponse)));
> > > > >>>
> > > > >>> // ~ Advice definitions
> > > > >>>
> > > > >>> before() : actionCall()
> > > > >>> {
> > > > >>> System.out.println("here i am");
> > > > >>> }
> > > > >>> }
> > > > >>>
> > > > >>>and the class I'm trying to weave it into :
> > > > >>>
> > > > >>> public class Logon_Action extends Action
> > > > >>> {
> > > > >>> public ActionForward execute(ActionMapping
> _actionMapping,
> > > > >>> ActionForm _actionForm, HttpServletRequest
> > _request,
> > > > >>> HttpServletResponse _response)
> > > > >>> {
> > > > >>> Logon_ActionForm form = (Logon_ActionForm)
> _actionForm;
> > > > >>> return null;
> > > > >>> }
> > > > >>> }
> > > > >>>
> > > > >>>Everything compiles OK (no errors, anyway), but when I
> > > > >>>
> > > > >>>
> > > > >>check the class I
> > > > >>
> > > > >>
> > > > >>>don't see any indication that the aspect is being applied.
> > > > >>>
> > > > >>>
> > > > >>I expect to see
> > > > >>
> > > > >>
> > > > >>>an indicator on the first statement of the class....
> > > > >>>
> > > > >>>I'm probably being dense on this, and it's something really
> > > > >>>
> > > > >>>
> > > > >>stupid, but I
> > > > >>
> > > > >>
> > > > >>>can't seem to figure it out. Any help?
> > > > >>>
> > > > >>>Thanks guys!
> > > > >>>
> > > > >>>Jerry Jalenak
> > > > >>>Development Manager, Web Publishing
> > > > >>>LabOne, Inc.
> > > > >>>10101 Renner Blvd.
> > > > >>>Lenexa, KS 66219
> > > > >>>(913) 577-1496
> > > > >>>
> > > > >>>jerry.jalenak@xxxxxxxxxx
> > > > >>>
> > > > >>>
> > > > >>>This transmission (and any information attached to it) may
> > > > >>>
> > > > >>>
> > > > >>be confidential
> > > > >>
> > > > >>
> > > > >>>and
> > > > >>>is intended solely for the use of the individual or entity
> > > > >>>
> > > > >>>
> > > > >>to which it is
> > > > >>
> > > > >>
> > > > >>>addressed. If you are not the intended recipient or the
> > > > >>>
> > > > >>>
> > > > >>person responsible
> > > > >>
> > > > >>
> > > > >>>for
> > > > >>>delivering the transmission to the intended recipient, be
> > > > >>>
> > > > >>>
> > > > >>advised that you
> > > > >>
> > > > >>
> > > > >>>have received this transmission in error and that any use,
> > > > >>>
> > > > >>>
> > > > >>dissemination,
> > > > >>
> > > > >>
> > > > >>>forwarding, printing, or copying of this information is
> > > > >>>
> > > > >>>
> > > > >>strictly prohibited.
> > > > >>
> > > > >>
> > > > >>>If you have received this transmission in error, please
> > > > >>>
> > > > >>>
> > > > >>immediately notify
> > > > >>
> > > > >>
> > > > >>>LabOne at the following email address:
> > > > >>>
> > > > >>>
> > > > >>securityincidentreporting@xxxxxxxxxx
> > > > >>
> > > > >>
> > > > >>>_______________________________________________
> > > > >>>aspectj-users mailing list
> > > > >>>aspectj-users@xxxxxxxxxxx
> > > > >>>http://dev.eclipse.org/mailman/listinfo/aspectj-users
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>_______________________________________________
> > > > >>aspectj-users mailing list
> > > > >>aspectj-users@xxxxxxxxxxx
> > > > >>http://dev.eclipse.org/mailman/listinfo/aspectj-users
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >This transmission (and any information attached to it) may
> > > > be confidential and is intended solely for the use of the
> > > > individual or entity to which it is addressed. If you are not
> > > > the intended recipient or the person responsible for
> > > > delivering the transmission to the intended recipient, be
> > > > advised that you have received this transmission in error and
> > > > that any use, dissemination, forwarding, printing, or copying
> > > > of this information is strictly prohibited. If you have
> > > > received this transmission in error, please immediately
> > > > notify LabOne at the following email address:
> > > > securityincidentreporting@xxxxxxxxxx
> > > > >
> > > > >_______________________________________________
> > > > >aspectj-users mailing list
> > > > >aspectj-users@xxxxxxxxxxx
> > > > >http://dev.eclipse.org/mailman/listinfo/aspectj-users
> > > > >
> > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > aspectj-users mailing list
> > > > aspectj-users@xxxxxxxxxxx
> > > > http://dev.eclipse.org/mailman/listinfo/aspectj-users
> > > >
> > >
> > > This transmission (and any information attached to it) may be
> > > confidential and is intended solely for the use of the individual
> or
> > entity to
> > > which it is addressed. If you are not the intended recipient or the
>
> > > person responsible for delivering the transmission to the intended
> > > recipient, be advised that you have received this transmission in
> > error and
> > > that any use, dissemination, forwarding, printing, or copying of
> this
> >
> > > information is strictly prohibited. If you have received this
> > transmission
> > > in error, please immediately notify LabOne at the following email
> > > address: securityincidentreporting@xxxxxxxxxx
> > >
> > > _______________________________________________
> > > aspectj-users mailing list
> > > aspectj-users@xxxxxxxxxxx
> > > http://dev.eclipse.org/mailman/listinfo/aspectj-users
> > >
> > >
> >
> > _______________________________________________
> > aspectj-users mailing list
> > aspectj-users@xxxxxxxxxxx
> > http://dev.eclipse.org/mailman/listinfo/aspectj-users
> >
>
>
> _______________________________________________
> aspectj-users mailing list
> aspectj-users@xxxxxxxxxxx
> http://dev.eclipse.org/mailman/listinfo/aspectj-users
>
>
