Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [aperi-dev] A little bit of Solaris headway made.


Good man Dale...
Hope we can add some relief to this effort.  We are looking within IBM to see if we can get the author of this code to donate a Solaris version.  This will save you from having to reverse engineer and reimplement (*ouch*).  If you can hold tight, we'll up that effort.  Then you can help us with testing and further development.    By the way, which agent do you want the most, fabric or data?

Todd Singleton
Software Engineer, Tivoli, IBM
Menlo Park, CA
email: toddsing@xxxxxxxxxx



Dale Ghent <daleg@xxxxxxxxxxxxx>
Sent by: aperi-dev-bounces@xxxxxxxxxxx

08/30/2007 07:12 PM

Please respond to
Aperi Development <aperi-dev@xxxxxxxxxxx>

To
Aperi Development <aperi-dev@xxxxxxxxxxx>
cc
Subject
[aperi-dev] A little bit of Solaris headway made.






Alright, so I'm trying to figure out the code under Aperi/device/  
and... wow, ok. I see under Linux that the Attribute code is execing  
shell commands (*cough*) and parsing their output to get sundry items  
such as volume layouts and what not.

Which leads me to wonder, what exactly am I striving for when it  
comes to producing output under Solaris? What should a full  
compliment of information look like? I guess, more specifically, what  
are the consumer(s) of that info expecting? I'm trying to demystify  
the info flow and architecture as I go along.

I'm working off a copy of the Linux code and am de-Linuxifying it in  
baby steps. I toggled the flag to DPRINT stuff, and the attached file  
is an indication of what I'm getting so far (before nasty stuff such  
as seg faults happen for quite obvious, yet copious reasons.)


If anything, libHBAAPI is working as expected.

/dale

_______________________________________________
aperi-dev mailing list
aperi-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/aperi-dev

CCG0051E The log manager could not read the properties file .//conf/nativelog.properties.
ERROR: Unable to open the CCLOG configuration file in .//conf/nativelog.properties.  Continue processing without tracing.

Entry ATTRIBUTE Scanner at Thu Aug 30 21:51:50 2007

dbg_flag = 1, arg_count = 1, argIndex = 1
Attribute Scanner Type: Full Scan (0)
Entry setUSEnglishLocale
Environment Variable LANG is currently NOT set
Environment Variable LC_ALL is currently NOT set
Environment Variables LANG and LC_ALL are both set to en_US locale
Exit setUSEnglishLocale with rc = 0
Entry initializeInternals
Loaded Common HBA API Library version 2
There are 1 adapters found in this host system
Adapter 0 is named as QLogic Corp.-QLA2342-0 
Adapter 0 is opened with handle 1
GetAdapterAttributes SUCCEED for Adapter 0 with NO_ERROR (0)
    Adapter Attributes:
	Manufacturer:        QLogic Corp.
	SerialNumber:        
	Model:               QLA2342
	ModelDescription:    Qlogic 133MHz PCI-X to 2Gb FC, Dual Channel
	Node WWN:            20 00 00 E0 8B 84 47 6F 
	NodeSymbolicName:    
	HardwareVersion:     
	DriverVersion:       20060630-2.16
	OptionROMVersion:    N/A
	FirmwareVersion:     3.3.117
	VendorSpecificID:    0
	NumberOfPorts:       2
	DriverName:          20060630-2.16
Exit initializeInternals with 1 enabled adapters found: rc = 0
Entry initializeTargetDatabase
GetAdapterPortAttributes SUCCEED for Adapter 0 at Port 0 with NO_ERROR (0)
    Adapter Port Attributes:
	Node WWN:             20 00 00 E0 8B 84 47 6F 
	Port WWN:             21 00 00 E0 8B 84 47 6F 
	PortFcId:             005F0700
	OSDeviceName:         /dev/cfg/c4
	NumDiscoveredPorts:   8
	PortType:             NPORT (5)
	PortState:            ONLINE (2)
	PortSupportedCOS:     10000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    20 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     
	PortSupportedSpeed:   1Gig 
	PortSpeed:            2Gig 
	PortMaxFrameSize:     2048
	FabricName:           00 00 00 00 00 00 00 00 
Discovered 8 ports for Adapter 0 at Port 0
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 0 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 54 63 
	Port WWN:             60 00 39 30 00 01 54 63 
	PortFcId:             005F0400
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 1 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 A5 
	Port WWN:             60 00 39 30 00 01 53 A5 
	PortFcId:             00620400
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 2 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB C2 
	Port WWN:             60 00 39 30 00 01 DB C2 
	PortFcId:             00640E00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 3 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 EB 
	Port WWN:             60 00 39 30 00 01 53 EB 
	PortFcId:             00630A00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 4 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB 44 
	Port WWN:             60 00 39 30 00 01 DB 44 
	PortFcId:             00660C00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 5 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB C8 
	Port WWN:             60 00 39 30 00 01 DB C8 
	PortFcId:             00650C00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 6 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 DA 
	Port WWN:             60 00 39 30 00 01 53 DA 
	PortFcId:             00640A00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 0 at Discivered Port 7 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB 55 
	Port WWN:             60 00 39 30 00 01 DB 55 
	PortFcId:             00630E00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
Entry getControllerNumber( )...for Adapter 0 Port 0
Device File for adatper 0: /dev/cfg/c4
Exit getControllerNumber...for Adapter 0 Port 0: ctrlNumber = 255
GetAdapterPortAttributes SUCCEED for Adapter 0 at Port 1 with NO_ERROR (0)
    Adapter Port Attributes:
	Node WWN:             20 01 00 E0 8B A4 47 6F 
	Port WWN:             21 01 00 E0 8B A4 47 6F 
	PortFcId:             00620700
	OSDeviceName:         /dev/cfg/c5
	NumDiscoveredPorts:   8
	PortType:             NPORT (5)
	PortState:            ONLINE (2)
	PortSupportedCOS:     10000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    20 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     
	PortSupportedSpeed:   1Gig 
	PortSpeed:            2Gig 
	PortMaxFrameSize:     2048
	FabricName:           00 00 00 00 00 00 00 00 
Discovered 8 ports for Adapter 0 at Port 1
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 0 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 54 63 
	Port WWN:             60 00 39 30 00 01 54 63 
	PortFcId:             005F0400
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 1 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 A5 
	Port WWN:             60 00 39 30 00 01 53 A5 
	PortFcId:             00620400
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 2 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB C2 
	Port WWN:             60 00 39 30 00 01 DB C2 
	PortFcId:             00640E00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 3 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 EB 
	Port WWN:             60 00 39 30 00 01 53 EB 
	PortFcId:             00630A00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 4 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB 44 
	Port WWN:             60 00 39 30 00 01 DB 44 
	PortFcId:             00660C00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 5 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB C8 
	Port WWN:             60 00 39 30 00 01 DB C8 
	PortFcId:             00650C00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 6 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 53 DA 
	Port WWN:             60 00 39 30 00 01 53 DA 
	PortFcId:             00640A00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.50f
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
GetDiscoveredPortAttributes SUCCEED for Adapter 0 Port 1 at Discivered Port 7 with NO_ERROR (0)
    Discovered Port Attributes:
	Node WWN:             50 00 39 30 00 01 DB 55 
	Port WWN:             60 00 39 30 00 01 DB 55 
	PortFcId:             00630E00
	OSDeviceName:         
	NumDiscoveredPorts:   0
	PortType:             UNKNOWN (1)
	PortState:            UNKNOWN (1)
	PortSupportedCOS:     8000000
	PortSupportedFC4Type: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortActiveFC4Type:    00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	PortSymbolicName:     APPLE   Xserve RAID FW version 1.51b
	PortSupportedSpeed:   Unknown 
	PortSpeed:            Unknown 
	PortMaxFrameSize:     0
	FabricName:           00 00 00 00 00 00 00 00 
Entry getControllerNumber( )...for Adapter 0 Port 1
Device File for adatper 0: /dev/cfg/c5
Exit getControllerNumber...for Adapter 0 Port 1: ctrlNumber = 255
Entry getFcpTargetMapping( )...for Adapter 0 with handle 1

Calling HBA_GetFcpTargetMapping with 8 entries...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
GetFCPTargetMapping completed for Adapter 0 with NO_ERROR (0) and found 8 target mappings
Number of Entries: 8
Information for FCP Target Mapping [0]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6226944 / 0    OS Device Name:  /dev/rdsk/c6t600039300001546301000000E37AEF32d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 54 63     Port WWN:  60 00 39 30 00 01 54 63     FC ID:  005F0400    FCP Lun:  0000000000000000
Information for FCP Target Mapping [1]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6490624 / 0    OS Device Name:  /dev/rdsk/c6t60003930000153EB01000000D767D3C0d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 53 EB     Port WWN:  60 00 39 30 00 01 53 EB     FC ID:  00630A00    FCP Lun:  0000000000000000
Information for FCP Target Mapping [2]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6423552 / 0    OS Device Name:  /dev/rdsk/c6t60003930000153A501000000D52AE0C4d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 53 A5     Port WWN:  60 00 39 30 00 01 53 A5     FC ID:  00620400    FCP Lun:  0000000000000000
Information for FCP Target Mapping [3]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6557184 / 0    OS Device Name:  /dev/rdsk/c6t500039300001DBC2d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 DB C2     Port WWN:  60 00 39 30 00 01 DB C2     FC ID:  00640E00    FCP Lun:  0000000000000000
Information for FCP Target Mapping [4]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6687744 / 0    OS Device Name:  /dev/rdsk/c6t500039300001DB44d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 DB 44     Port WWN:  60 00 39 30 00 01 DB 44     FC ID:  00660C00    FCP Lun:  0000000000000000
Information for FCP Target Mapping [5]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6622208 / 0    OS Device Name:  /dev/rdsk/c6t500039300001DBC8d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 DB C8     Port WWN:  60 00 39 30 00 01 DB C8     FC ID:  00650C00    FCP Lun:  0000000000000000
Information for FCP Target Mapping [6]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6556160 / 0    OS Device Name:  /dev/rdsk/c6t60003930000153DA01000000D767690Ed0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 53 DA     Port WWN:  60 00 39 30 00 01 53 DA     FC ID:  00640A00    FCP Lun:  0000000000000000
Information for FCP Target Mapping [7]...
	SCSI ID: Bus/Target/Lun Number:  4 / 6491648 / 0    OS Device Name:  /dev/rdsk/c6t500039300001DB55d0s2
	FCP ID:  Node WWN:  50 00 39 30 00 01 DB 55     Port WWN:  60 00 39 30 00 01 DB 55     FC ID:  00630E00    FCP Lun:  0000000000000000
Exit getFcpTargetMapping...for adatper 0 with handle 1
Updating Discovered Port 0 with FCP Target Mapping for targetDB 0...
	Updated targetDB[0].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 3 with FCP Target Mapping for targetDB 1...
	Updated targetDB[3].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 1 with FCP Target Mapping for targetDB 2...
	Updated targetDB[1].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 2 with FCP Target Mapping for targetDB 3...
	Updated targetDB[2].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 4 with FCP Target Mapping for targetDB 4...
	Updated targetDB[4].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 5 with FCP Target Mapping for targetDB 5...
	Updated targetDB[5].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 6 with FCP Target Mapping for targetDB 6...
	Updated targetDB[6].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Updating Discovered Port 7 with FCP Target Mapping for targetDB 7...
	Updated targetDB[7].targetProperty.ctrlNumber = 4 with SCSI Bus Number
Exit initializeTargetDatabase...with 1 adapters found: rc = 0
For Adapter 0 with QLogic Corp.-QLA2342-0 HBA, RNID is NOT supported (bDwnLvlDrv = 1)

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6226944 at Port WWN 60 00 39 30 00 01 54 63 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 54 63 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 37 5A 51 38 47 01 23 00 08 50 00 39 30 00 01 54 63 01 03 00 10 60 00 39 30 00 01 54 63 01 00 00 00 E3 7A EF 32 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 54 63  and Port WWN: 60 00 39 30 00 01 54 63 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6226944 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6423552 at Port WWN 60 00 39 30 00 01 53 A5 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 A5 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 34 54 51 38 47 01 23 00 08 50 00 39 30 00 01 53 A5 01 03 00 10 60 00 39 30 00 01 53 A5 01 00 00 00 D5 2A E0 C4 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 A5  and Port WWN: 60 00 39 30 00 01 53 A5 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6423552 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6557184 at Port WWN 60 00 39 30 00 01 DB C2 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB C2 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 39 54 51 38 47 01 03 00 08 50 00 39 30 00 01 DB C2 01 03 00 10 60 00 39 30 00 01 DB C2 01 00 00 00 D5 2A B1 7B ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB C2  and Port WWN: 60 00 39 30 00 01 DB C2 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6557184 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6490624 at Port WWN 60 00 39 30 00 01 53 EB with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 EB with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 33 30 30 44 47 51 38 47 01 23 00 08 50 00 39 30 00 01 53 EB 01 03 00 10 60 00 39 30 00 01 53 EB 01 00 00 00 D7 67 D3 C0 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 EB  and Port WWN: 60 00 39 30 00 01 53 EB 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6490624 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6687744 at Port WWN 60 00 39 30 00 01 DB 44 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB 44 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 43 39 51 38 47 01 03 00 08 50 00 39 30 00 01 DB 44 01 03 00 10 60 00 39 30 00 01 DB 44 01 00 00 00 D5 2A B1 3B ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB 44  and Port WWN: 60 00 39 30 00 01 DB 44 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6687744 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6622208 at Port WWN 60 00 39 30 00 01 DB C8 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB C8 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 41 35 51 38 47 01 03 00 08 50 00 39 30 00 01 DB C8 01 03 00 10 60 00 39 30 00 01 DB C8 01 00 00 00 D5 2A C9 45 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB C8  and Port WWN: 60 00 39 30 00 01 DB C8 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6622208 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6556160 at Port WWN 60 00 39 30 00 01 53 DA with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 DA with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 32 41 51 38 47 01 23 00 08 50 00 39 30 00 01 53 DA 01 03 00 10 60 00 39 30 00 01 53 DA 01 00 00 00 D7 67 69 0E ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 DA  and Port WWN: 60 00 39 30 00 01 53 DA 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6556160 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Bus 4 Target 6491648 at Port WWN 60 00 39 30 00 01 DB 55 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Bus 4 Target 0 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB 55 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 43 55 51 38 47 01 03 00 08 50 00 39 30 00 01 DB 55 01 03 00 10 60 00 39 30 00 01 DB 55 01 00 00 00 D5 2A C9 B6 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB 55  and Port WWN: 60 00 39 30 00 01 DB 55 
Exit findNodeInList with NO match returning Current Node
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Exit addLunToNode with rc = 0
Adding Current Node for Target 6491648 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 8 at Port WWN 60 00 39 30 00 01 54 63 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 8 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 54 63 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 37 5A 51 38 47 01 23 00 08 50 00 39 30 00 01 54 63 01 03 00 10 60 00 39 30 00 01 54 63 01 00 00 00 E3 7A EF 32 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 54 63  and Port WWN: 60 00 39 30 00 01 54 63 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 9 at Port WWN 60 00 39 30 00 01 53 A5 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 9 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 A5 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 34 54 51 38 47 01 23 00 08 50 00 39 30 00 01 53 A5 01 03 00 10 60 00 39 30 00 01 53 A5 01 00 00 00 D5 2A E0 C4 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 A5  and Port WWN: 60 00 39 30 00 01 53 A5 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 10 at Port WWN 60 00 39 30 00 01 DB C2 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 10 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB C2 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 39 54 51 38 47 01 03 00 08 50 00 39 30 00 01 DB C2 01 03 00 10 60 00 39 30 00 01 DB C2 01 00 00 00 D5 2A B1 7B ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB C2  and Port WWN: 60 00 39 30 00 01 DB C2 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 11 at Port WWN 60 00 39 30 00 01 53 EB with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 11 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 EB with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 33 30 30 44 47 51 38 47 01 23 00 08 50 00 39 30 00 01 53 EB 01 03 00 10 60 00 39 30 00 01 53 EB 01 00 00 00 D7 67 D3 C0 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 EB  and Port WWN: 60 00 39 30 00 01 53 EB 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 12 at Port WWN 60 00 39 30 00 01 DB 44 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 12 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB 44 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 43 39 51 38 47 01 03 00 08 50 00 39 30 00 01 DB 44 01 03 00 10 60 00 39 30 00 01 DB 44 01 00 00 00 D5 2A B1 3B ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB 44  and Port WWN: 60 00 39 30 00 01 DB 44 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 13 at Port WWN 60 00 39 30 00 01 DB C8 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 13 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB C8 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 41 35 51 38 47 01 03 00 08 50 00 39 30 00 01 DB C8 01 03 00 10 60 00 39 30 00 01 DB C8 01 00 00 00 D5 2A C9 45 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB C8  and Port WWN: 60 00 39 30 00 01 DB C8 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 14 at Port WWN 60 00 39 30 00 01 53 DA with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 14 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 53 DA with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 1F 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 00 00 00 00 00 31 2E 35 30 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 21 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 35 34 35 30 30 32 41 51 38 47 01 23 00 08 50 00 39 30 00 01 53 DA 01 03 00 10 60 00 39 30 00 01 53 DA 01 00 00 00 D7 67 69 0E ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 53 DA  and Port WWN: 60 00 39 30 00 01 53 DA 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0

Calling HBA_SendReportLUNs...started at Thu Aug 30 21:51:50 2007
 and completed at Thu Aug 30 21:51:50 2007
HBA_SendReportLUNs completed for Adapter 0 Discovered Port 15 at Port WWN 60 00 39 30 00 01 DB 55 with NO_ERROR (0) and pStsSns[0]=0
	ReportLUNs Output = [ 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
	There are 1 LUNs detected in current target
lunIndex = 8, fcLUN = 0 (0x0000000000000000)
HBA_SendScsiInquiry completed for Adapter 0 Discovered Port 15 Lun 0000000000000000 at Port WWN 60 00 39 30 00 01 DB 55 with NO_ERROR (0) and pStsSns[0]=0
	Inquiry (00h) Output = [ 00 00 05 12 5B 00 00 02 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 31 2E 35 31 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0D 40 0D A0 0E 20 0D 80 09 00 0A 00 00 20 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
	Disk is FOUND...with Vendor/Product ID/Revision: APPLE   Xserve RAID     1.51
LUN 0000000000000000 Scsi Inquiry page code = 80 completed with NO_ERROR (0)
	Inquiry (80h) Output = [ 00 80 00 10 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 ]
Replaced Current Node's S/N & UniqueID with Page 80h data 
LUN 0000000000000000 Scsi Inquiry page code = 83 completed with NO_ERROR (0)
	Inquiry (83h) Output = [ 00 83 00 48 02 01 00 24 41 50 50 4C 45 20 20 20 58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 4B 43 37 31 33 30 30 43 55 51 38 47 01 03 00 08 50 00 39 30 00 01 DB 55 01 03 00 10 60 00 39 30 00 01 DB 55 01 00 00 00 D5 2A C9 B6 ]
Skipping HBA_SendReadCapacity for ALL devices
Entry findNodeInList( ) with current node's Node WWN: 50 00 39 30 00 01 DB 55  and Port WWN: 60 00 39 30 00 01 DB 55 
Exit findNodeInList with a match of Node/Port WWNs returning Adapter Node...
Adding Current LUN Info to list returned from findNodeInList()
Entry addLunToNode
Current LUN has multipaths
Exit addLunToNode with rc = 0
Adding Current Node for Target 0 to FC Node List with 1 Luns
Entry addNodeToList
Exit addNodeToList with rc = 0
Adding Current HBA Node to FC Node List
Entry addNodeToList
Exit addNodeToList with rc = 0
Platform processing for Adapter 0 with handle 1
Entry discoverPlatformList
Entry MSGetPlatformNameList
GetPlatformNameList completed with ERROR (1) for device handle 1
	GetPlatformNameList Output = [ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Exit MSGetPlatformNameList with rc = 1
Exit discoverPlatformList with rc = 14
discoverPlatformList() returned with reasonCode = 14
Attribute Discover Success with Return Code = 0
Host Bus Adapter Information...
    Adapter Table [0]: 
	Enabled = 2
	Adapter Identifier = 20 00 00 E0 8B 84 47 6F 
	Port ID = 00620700
	Port Type = NPORT (5)
	Port State = ONLINE (2)
	HBA File Name = QLogic Corp.-QLA2342-0 
	HBA Handle = 1 
	Attached devices: 
Discovered Port Information on current HBA...
	Device 0: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 005F0400
		Node Name = 50 00 39 30 00 01 54 63 
		Port Name = 60 00 39 30 00 01 54 63 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6226944 / 0
		Scsi OS Device Name = /dev/rdsk/c6t600039300001546301000000E37AEF32d0s2
Discovered Port Information on current HBA...
	Device 1: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00620400
		Node Name = 50 00 39 30 00 01 53 A5 
		Port Name = 60 00 39 30 00 01 53 A5 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6423552 / 0
		Scsi OS Device Name = /dev/rdsk/c6t60003930000153A501000000D52AE0C4d0s2
Discovered Port Information on current HBA...
	Device 2: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00640E00
		Node Name = 50 00 39 30 00 01 DB C2 
		Port Name = 60 00 39 30 00 01 DB C2 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6557184 / 0
		Scsi OS Device Name = /dev/rdsk/c6t500039300001DBC2d0s2
Discovered Port Information on current HBA...
	Device 3: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00630A00
		Node Name = 50 00 39 30 00 01 53 EB 
		Port Name = 60 00 39 30 00 01 53 EB 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6490624 / 0
		Scsi OS Device Name = /dev/rdsk/c6t60003930000153EB01000000D767D3C0d0s2
Discovered Port Information on current HBA...
	Device 4: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00660C00
		Node Name = 50 00 39 30 00 01 DB 44 
		Port Name = 60 00 39 30 00 01 DB 44 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6687744 / 0
		Scsi OS Device Name = /dev/rdsk/c6t500039300001DB44d0s2
Discovered Port Information on current HBA...
	Device 5: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00650C00
		Node Name = 50 00 39 30 00 01 DB C8 
		Port Name = 60 00 39 30 00 01 DB C8 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6622208 / 0
		Scsi OS Device Name = /dev/rdsk/c6t500039300001DBC8d0s2
Discovered Port Information on current HBA...
	Device 6: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00640A00
		Node Name = 50 00 39 30 00 01 53 DA 
		Port Name = 60 00 39 30 00 01 53 DA 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6556160 / 0
		Scsi OS Device Name = /dev/rdsk/c6t60003930000153DA01000000D767690Ed0s2
Discovered Port Information on current HBA...
	Device 7: 
		DeviceFlag = 1
		Port Index = 0
		Port FC ID = 00630E00
		Node Name = 50 00 39 30 00 01 DB 55 
		Port Name = 60 00 39 30 00 01 DB 55 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 4
		Scsi Bus/Target/Lun Number = 4 / 6491648 / 0
		Scsi OS Device Name = /dev/rdsk/c6t500039300001DB55d0s2
Discovered Port Information on current HBA...
	Device 8: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 005F0400
		Node Name = 50 00 39 30 00 01 54 63 
		Port Name = 60 00 39 30 00 01 54 63 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 9: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00620400
		Node Name = 50 00 39 30 00 01 53 A5 
		Port Name = 60 00 39 30 00 01 53 A5 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 10: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00640E00
		Node Name = 50 00 39 30 00 01 DB C2 
		Port Name = 60 00 39 30 00 01 DB C2 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 11: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00630A00
		Node Name = 50 00 39 30 00 01 53 EB 
		Port Name = 60 00 39 30 00 01 53 EB 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 12: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00660C00
		Node Name = 50 00 39 30 00 01 DB 44 
		Port Name = 60 00 39 30 00 01 DB 44 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 13: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00650C00
		Node Name = 50 00 39 30 00 01 DB C8 
		Port Name = 60 00 39 30 00 01 DB C8 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 14: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00640A00
		Node Name = 50 00 39 30 00 01 53 DA 
		Port Name = 60 00 39 30 00 01 53 DA 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Discovered Port Information on current HBA...
	Device 15: 
		DeviceFlag = 1
		Port Index = 1
		Port FC ID = 00630E00
		Node Name = 50 00 39 30 00 01 DB 55 
		Port Name = 60 00 39 30 00 01 DB 55 
		Port Type/State = UNKNOWN (1) / UNKNOWN (1) 
		Fcp Lun = 0x0000000000000000
		Controller Number = 255
		Scsi Bus/Target/Lun Number = 0 / 0 / 0
		Scsi OS Device Name = 
Adapter and Node List Information...
    Adapter Info[0]: 
	Enabled Flag         : 0 
	HBA Handle           : 1 
	HBA Offset           : 0 
	Adapter Name         : QLogic Corp.-QLA2342-0 
	Host Name            : ds2.rs.umbc.edu 
	Identifier           : 20 00 00 E0 8B 84 47 6F 
	Node WWN             : 20 00 00 E0 8B 84 47 6F 
	Port WWN             : 21 01 00 E0 8B A4 47 6F 
	Port ID              : 00620700
	Manufacturer         : QLogic Corp. 
	Model                : QLA2342 
	Model Description    : Qlogic 133MHz PCI-X to 2Gb FC, Dual Channel 
	Node Symbolic Name   :  
	Hardware Version     :  
	Driver Version       : 20060630-2.16 
	Optional ROM Version : N/A 
	Firmware Version     : 3.3.117 
	Vendor Specific ID   : 0 
	Number of Ports      : 2 
	Total Dscvrd Ports   : 16 
	Total Targets        : 8 
	Common API Version   : 2 
Node List Information on current HBA...
    Device 0: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 54 63 
	Port WWN        : 60 00 39 30 00 01 54 63 
	Port ID         : 005F0400
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 54 63 
		Port WWN      : 60 00 39 30 00 01 54 63 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 54 63 
		Port WWN      : 60 00 39 30 00 01 54 63 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 1: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 A5 
	Port WWN        : 60 00 39 30 00 01 53 A5 
	Port ID         : 00620400
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 A5 
		Port WWN      : 60 00 39 30 00 01 53 A5 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 A5 
		Port WWN      : 60 00 39 30 00 01 53 A5 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 2: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB C2 
	Port WWN        : 60 00 39 30 00 01 DB C2 
	Port ID         : 00640E00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB C2 
		Port WWN      : 60 00 39 30 00 01 DB C2 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB C2 
		Port WWN      : 60 00 39 30 00 01 DB C2 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 3: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 EB 
	Port WWN        : 60 00 39 30 00 01 53 EB 
	Port ID         : 00630A00
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 EB 
		Port WWN      : 60 00 39 30 00 01 53 EB 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 EB 
		Port WWN      : 60 00 39 30 00 01 53 EB 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 4: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB 44 
	Port WWN        : 60 00 39 30 00 01 DB 44 
	Port ID         : 00660C00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB 44 
		Port WWN      : 60 00 39 30 00 01 DB 44 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB 44 
		Port WWN      : 60 00 39 30 00 01 DB 44 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 5: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB C8 
	Port WWN        : 60 00 39 30 00 01 DB C8 
	Port ID         : 00650C00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB C8 
		Port WWN      : 60 00 39 30 00 01 DB C8 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB C8 
		Port WWN      : 60 00 39 30 00 01 DB C8 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 6: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 DA 
	Port WWN        : 60 00 39 30 00 01 53 DA 
	Port ID         : 00640A00
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 DA 
		Port WWN      : 60 00 39 30 00 01 53 DA 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID
		Revision      : 1.50
		Node WWN      : 50 00 39 30 00 01 53 DA 
		Port WWN      : 60 00 39 30 00 01 53 DA 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 7: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB 55 
	Port WWN        : 60 00 39 30 00 01 DB 55 
	Port ID         : 00630E00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Capacity        : 0
LUN Information on current discovered port...
	Lun 0: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB 55 
		Port WWN      : 60 00 39 30 00 01 DB 55 
		Controller    : 4
		PortBusTargLun: 00 04 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
LUN Information on current discovered port...
	Lun 1: 
		Device Type   : Disk (0)
		Capacity      : 0
		Vendor        : APPLE   
		Product ID    : Xserve RAID     
		Revision      : 1.51
		Node WWN      : 50 00 39 30 00 01 DB 55 
		Port WWN      : 60 00 39 30 00 01 DB 55 
		Controller    : 255
		PortBusTargLun: 00 00 00 00 
		LunID         : %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
Node List Information on current HBA...
    Device 8: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 54 63 
	Port WWN        : 60 00 39 30 00 01 54 63 
	Port ID         : 005F0400
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 37 5A 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 9: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 A5 
	Port WWN        : 60 00 39 30 00 01 53 A5 
	Port ID         : 00620400
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 34 54 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 10: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB C2 
	Port WWN        : 60 00 39 30 00 01 DB C2 
	Port ID         : 00640E00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 39 54 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 11: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 EB 
	Port WWN        : 60 00 39 30 00 01 53 EB 
	Port ID         : 00630A00
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 33 30 30 44 47 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 12: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB 44 
	Port WWN        : 60 00 39 30 00 01 DB 44 
	Port ID         : 00660C00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 43 39 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 13: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB C8 
	Port WWN        : 60 00 39 30 00 01 DB C8 
	Port ID         : 00650C00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 41 35 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 14: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 53 DA 
	Port WWN        : 60 00 39 30 00 01 53 DA 
	Port ID         : 00640A00
	Device Type     : Disk
	SCSI Name       : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID
	Revision        : 1.50
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 35 34 35 30 30 32 41 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 15: 
	Node Type       : SCSI
	Node WWN        : 50 00 39 30 00 01 DB 55 
	Port WWN        : 60 00 39 30 00 01 DB 55 
	Port ID         : 00630E00
	Device Type     : Disk
	SCSI Name       : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Vendor          : APPLE   
	Product ID      : Xserve RAID     
	Revision        : 1.51
	Port Type       : NLPORT (6)
	Serial Number   : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Unique ID       : 4B 43 37 31 33 30 30 43 55 51 38 47 42 30 20 20 
	Capacity        : 0
Node List Information on current HBA...
    Device 16: 
	Node Type       : SCSI
	Node WWN        : 20 00 00 E0 8B 84 47 6F 
	Port WWN        : 21 01 00 E0 8B A4 47 6F 
	Port ID         : 00620700
	Device Type     : OtherEntity
	SCSI Name       : 
	Vendor          : 
	Product ID      : 
	Revision        : 
	Port Type       : NPORT (5)
	Serial Number   : 
	Unique ID       : 
	Capacity        : 0
Entry generateXml
Entry getSystemInfo

	Capacity        : 0
Exit getSystemInfo with System Info
Entry getLinuxSystemInfo
SysName: SunOS, NodeName: ds2.rs.umbc.edu, Release (OS Version): 5.10, Version (OS Level): Generic_118855-33, Machine: i86pc
Exit getLinuxSystemInfo with Solaris System Info
Entry reStructAdapterInfo with adapterCount: 1
Exit reStructAdapterInfo with 1 Controllers Found
Entry reStructDeviceToPE with adapterCount: 1
Number of LUNs attached to PE (KC545007ZQ8GB0  ): 2
Number of LUNs attached to PE (KC545004TQ8GB0  ): 2
Number of LUNs attached to PE (KC713009TQ8GB0  ): 2
Number of LUNs attached to PE (KC54300DGQ8GB0  ): 2
Number of LUNs attached to PE (KC71300C9Q8GB0  ): 2
Number of LUNs attached to PE (KC71300A5Q8GB0  ): 2
Number of LUNs attached to PE (KC545002AQ8GB0  ): 2
Number of LUNs attached to PE (KC71300CUQ8GB0  ): 2
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
	FC Node with NO Luns 
Exit reStructDeviceToPE with 8 PEs found
Entry assembleLUN with adapterCount: 1
Processing Current LUN with Node WWN 50 00 39 30 00 01 54 63  and Port WWN 60 00 39 30 00 01 54 63 
Processing Current LUN with Node WWN 50 00 39 30 00 01 54 63  and Port WWN 60 00 39 30 00 01 54 63 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 A5  and Port WWN 60 00 39 30 00 01 53 A5 
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 A5  and Port WWN 60 00 39 30 00 01 53 A5 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB C2  and Port WWN 60 00 39 30 00 01 DB C2 
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB C2  and Port WWN 60 00 39 30 00 01 DB C2 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 EB  and Port WWN 60 00 39 30 00 01 53 EB 
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 EB  and Port WWN 60 00 39 30 00 01 53 EB 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB 44  and Port WWN 60 00 39 30 00 01 DB 44 
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB 44  and Port WWN 60 00 39 30 00 01 DB 44 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB C8  and Port WWN 60 00 39 30 00 01 DB C8 
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB C8  and Port WWN 60 00 39 30 00 01 DB C8 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 DA  and Port WWN 60 00 39 30 00 01 53 DA 
Processing Current LUN with Node WWN 50 00 39 30 00 01 53 DA  and Port WWN 60 00 39 30 00 01 53 DA 
Current LUN Xml has multipaths
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB 55  and Port WWN 60 00 39 30 00 01 DB 55 
Processing Current LUN with Node WWN 50 00 39 30 00 01 DB 55  and Port WWN 60 00 39 30 00 01 DB 55 
Current LUN Xml has multipaths
Number of LUNs attached to adapter 0: 16
Exit assembleLUN with total number of 16 LUNs found
Entry reStructDeviceToFCN with adapterCount: 1
Number of FC Nodes attached to adapter 0: 17
Exit reStructDeviceToFCN with total number of 17 FC Nodes found
Entry reStructDeviceToFCP with adapterCount: 1
Number of FC ports attached to adapter 0: 17
Exit reStructDeviceToFCP with total number of 17 FC Ports found
Entry assembleCG with adapterCount: 1
Exit assembleCG with total number of 17 CGs found
cat: cannot open /proc/partitions

Back to the top